Tip: use quotes for an exact phrase, e.g. "teacher education"
A present study reveals the influence of nano Al2O3 and ZrO2 reinforcements on the fracture toughness of Hybrid Metal matrix Composites (HMMCs) made of Al6061 alloy. Composites are synthesized by varying weight fraction of alumina and…
Analyses of longitudinal fracture behavior of inhomogeneous beams which have continuously varying sizes of the cross-section along the beam length are carried-out. Beams of a rectangular cross-section are studied. It is assumed that beams…
The present contribution reviews a recently proposed method to rapidly estimate the averaged SED at the tip of short as well as long cracks under in-plane I+II and long cracks under out-of-plane I+III mixed mode loadings. Short cracks are…
The size effect significantly influences the structural design of concrete elements, particularly when applying fracture mechanics principles. As structural dimensions increase, a significant outcome of the size effect is the decline in…
This study aims to assess the delamination effect and predict the evolution of damage in 3D printed specimens to investigate the mechanical behavior occurring due to the delamination of the layers of 3D printed thermoplastic polymers.…
Bamboo and wood are the most widely applied and the oldest natural structural materials in the world. Currently, worldwide output of wooden material is 1 billion ton, almost the same as steel. Most of them are used as structure, such as…
Il problema della valutazione della duttilità degli elementi in calcestruzzo armato soggetti a flessione o presso-flessione è stato largamente studiato negli ultimi decenni, sia da un punto di vista sperimentale che analitico. Data…
A thorough study of the literature indicated that there is not much relevant research on the application of GFRP gratings. Otherwise, extensive study has been done on FRP bars, laminates, sheets, strips, and rods. This study proposes a…
The exhaustion of constructive ways for increasing the service life of parts has led to the development of new methods which can improve their material properties during operation under various loading conditions. Laser shock peening (LSP)…
In the present work, the fracture performance of pre-cracked reinforced concrete beams was investigated numerically and experimentally. Experimental and numerical programs were designed to examine the effect of beam width, b, (120 and 250…
The novel destructive method is implemented for quantitative assessment of fatigue damage accumulation in the stress concentration zone accompanied by residual stress due to cold expansion of the through-thickness hole. Damage accumulation…
Under the cold impact of liquid nitrogen, the shale suffers from the significant freezing damage, which provides the possibility of liquid nitrogen fracturing. Moreover, shale fracturing assisted by liquid nitrogen can effectively reduce…
The objective of this research work is to study the fracture behavior of Al6061 with graphite particulate composite produced by the stir casting technique. For the study different composition of the particulate metal matrix composite used…
Cyclic stress-strain response and fatigue damage character has been investigated in austenitic stainless steel 316L. Hollow cylindrical specimens have been cyclically deformed in combined tension-compression and torsion under constant…
The usage of rebars in construction is the most common method for reinforcing plain concrete and thus bridging the tensile stresses along the concrete crack surfaces. Usually design codes for modelling the bond behaviour of rebars and…
The modified compact tension test (MCT) may represent a new test configuration for the performance of static and other kinds of fatigue tests on concrete-like materials. Core drilling can be employed to obtain specimens which are…
Elastic fracture mechanics commonly defines the fracture resistance of brittle materials within an idealised picture of planar and traction free cracks. An efficient approach to describe the interface conditions in real cracks, such as…
The present paper aims to assess the effect of freeze/thaw cycles on fracture behaviour of a natural stone: the red Verona marble. A wide variety of specimen types and methods to determine Mode I fracture toughness of natural stones are…
The fracture mechanical properties of silicate based materials are determined from various fracture mechanicals tests, e.g. three- or four- point bending test, wedge splitting test, modified compact tension test etc. For evaluation of the…
The Equal Channel Angular Pressing is a hardening treatment with which ductile metals can beprocessed to refine their grain and sub-grain structure. This process enhances the mechanical strength of metalsin terms of tensile strength…
In structural engineering, composite patch repairs are widely used to address cracked structures. However, their behavior under thermo-mechanical loading remains complex and less understood. This study examines the repair of a…
The paper presents a result of experimental tests of welded S355 specimens subjected to combined bending and torsion loading. In order to analyse how the fillet joints’ shape and the load ratio affect the crack growth, we selected two…
In this study, an efficient computational method for modeling the transition from transgranular to intergranular fracture mechanisms based on phase field fracture theory is discussed. Structural heterogeneity of the material is modeled on…
The paper describes the results of an experimental study of a polyurethane material treated by ion implantation technology. The problems of crack growth in the near-surface layer carbonized by ion treatment were investigated using digital…
This study represents a methodology to assess the probability of failure based on three the driving force formulations defined by the corresponding brittle and ductile fracture criteria for compact and bending specimens made of 34XH3MA and…
In the design of adhesive structures, it is extremely important to accurately predict their strength and fracture properties (critical strain energy release rate in tension, GIC, and shear, GIIC). In most cases, the loads occur in…
This work is devoted to research and development of models for the processes of nucleation and growth of delamination in laminated composite materials. Possibilities of fracture mechanics approaches using virtual crack closure technique as…
Digital image correlation (DIC) is a technique in experimental mechanics to acquire full-field measurement data of displacements and deformations from the surface of specimens or components. Especially for the investigations of cracks it…
In this study a three-dimensional finite element method analysis of repairing plate with bonded composite patch subjected to tensile load was presented. The effect of the corrosion on the damage of the adhesive (FM73) in the length of…
The structural integrity and reliability of glass components are key issues for concentrated solar power (CSP) systems. For example, the glass windows in a solar furnace may suffer catastrophic fracture due to thermal and structural…
The phenomenon of ignition and explosive failure of specimens from high-entropy alloys (HEAs) of systems Ti-Zr-Hf-Ni-Cu, Ti-Zr-Hf-Ni-Cu-Co at quasi-static compression tests was found. It physical model is proposed. It is exhibited that the…
A new technique of Layered Hollow Core Slab (LHCS) has been used to obtain a slab with an optimum weight-to-strength ratio. Specimens with a 90 mm top layer of High Strength Concrete (HSC) and a 90 mm bottom layer of Lightweight Aggregate…
Some numerical studies of crack propagation are based on using constitutive models that account for damage evolution in the material. When a critical damage value has been reached in a material point, it is natural to assume that this…
A study on the accuracy of the approximation of the displacement field around of crack tip in a sample made from bridge steel (S355) is main objective of contribution. Linear elastic fracture mechanics (LEFM) theory in framework of…
A durability method in view of cathodic protection is proposed to improve the corrosion fatigue resistance of AH 32 steel in seawater. By aid of corrosion fatigue tests, the effects of thermal spraying Zn (zinc) and Cr (chromium) coating…
The present paper is devoted to an experimental study on the fracture behaviour of natural stones, commonly used as elements for building cladding, under both monotonic and cyclic loading, with particular emphasis to white Carrara marble.…
This investigation revisits biaxial fatigue experiments carried out with the nickel-based superalloy termed Waspaloy. Recently, yield criteria extended to multiaxial fatigue and stress based approaches were analysed and their performance…
This paper initially investigates the accuracy of two methods, i.e., the Maximum Variance Method (MVM) and the Maximum Damage Method (MDM), in predicting the orientation of the crack initiation plane in three different metallic materials…
Crack growth and brittle fracture is one of the major failure modes in bone materials and therefore understanding the fracture behavior and affecting parameters on the crack growth resistance of bone is necessary for biomechanics…
The paper is aimed at the indicative evaluation of the effect of random scatter of input parameters in case of durability of reinforced concrete bridge deck. The time to onset of corrosion of steel reinforcement of concrete bridge deck…
This paper describes a novel method to model the stress gradient effect in fretting-fatigue. The analysis of the mechanical fields in the proximity of the contact edges allows to extract nonlocal intensity factors that take into account…
The increase in life expectancy and attention to the quality of life of elderly people spurred the need, in the last decades, to increase the capabilities of medical and surgical techniques. Among these, the development of prosthetic…
Cracks on concrete surface are typically clear warning signs of a potential threat to the integrity and serviceability of structure. The techniques based on image processing can effectively detect the cracks from images. These techniques…
In this study, a generalized Barenblatt and Botvina dimensional analysis approach to fatigue crack growth is proposed in order to highlight and explain the deviations from the classical power-law equations used to characterize the fatigue…
Over the last two decades, piezoelectric actuators have emerged as a promising solution for structural repair. In this work, initially the stress intensity factor (SIF) estimation using the finite element (FE) approach at crack tips in…
In the last decade, several studies have been introduced to the development and use of compressed earth blocks in green building construction. Studying the evaluation of existing cracks in construction builders by these blocks is an…
Experimental method for a characterization of high-cycle fatigue evolution of residual stress near cold-expanded hole is developed and implemented. The technique is based on simultaneous measurements of deformation response to narrow…
In this work the finite element method (FEM) was used to analyze the mechanical behavior of the composite materials subjected to the mechanical loading. This behavior is studied in terms of stress intensity factor variation as a function…
In fracture mechanics (domain of cracked environments), it is concerned to forecast the behavior of the structures until their ruin. Friction Stir Welding (FSW) is a new process for solid-state joining, it can weld high strength aluminum…
The paper describes test specimen thickness effect on stress intensity factor (KI), and T-stresses stresses (T11 and T33) for a Compact Tension specimen. Formulations to estimate 3D KI, T11 and T33 stresses are proposed based on extensive…
