Tip: use quotes for an exact phrase, e.g. "teacher education"
This paper contains a proposition setting out a new way of determining an orientation angle of the critical plane. The applied method involves an analysis of fatigue life results’ scatter of several selected materials on the basis of a new…
This work presents a review of crack propagation simulation models considering plane stress and plane strain conditions. It is presented also a chronological different methodologies used to perform the crack advance by finite element…
Crack closure influences fatigue crack growth rate and must be included in the design of components. Plasticity induced crack closure is intimately linked with the crack tip plastic deformation, which becomes residual as the crack…
This is the second part of a short three-paper series, aiming to revisit some classical concepts of Linear Elastic Fracture Mechanics. Being the intermediate step of the analysis between infinite domains (discussed in Part-I) and finite…
In this paper the plastic stress intensity factor (SIF) is used to study the coupling effects of loading biaxiality, material properties and cracked body configuration in both the small- and large-scale yielding ranges. A finite element…
The novel destructive method is implemented for quantitative assessment of fatigue damage accumulation in the stress concentration zone accompanied by residual stress due to cold expansion of the through-thickness hole. Damage accumulation…
The stress, strain rate and process zone with respect to the creep-crack growth are analyzed by employing damage-evolution equations. The damage models for the fracture of the process zone are represented using a stress and ductility based…
Fatigue crack growth (FCG) is linked to irreversible and non-linear processes happening at the crack tip, which explains different problems observed in the use of da/dN-DK curves. The replacement of DK by non-linear crack tip parameters…
This study examines the fracture toughness of Al6061 alloy-based hybrid composites reinforced with silicon carbide particles and cenosphere microspheres. Aluminum alloy Al6061 is widely utilized in structural applications due to its…
The paper studies the adhesive strength of aluminum alloy specimens bonded with the use of an epoxy adhesive, under the tensile-shear stress state, depending on the testing temperature. Tension of modified Arcan specimens with load angles…
In this paper the fatigue crack growth tests were carried out on surface-crack tension (SCT) specimens, made of 7050 and Ti6Al4V alloys, with initial semi-elliptical surface cracks. Pure Mode I conditions were realized on SCT specimens…
In the cohesive framework, a stress-state dependent cohesive model, combined with an irreversible damage parameter has been used in simulation of fatigue crack growth initiation and continued growth. The model is implemented as interface…
In mixed-mode conditions, the competing contribution of the different stress intensity factors predicts fracture initiation load as well as crack propagation direction. Commonly, mixed-mode fracture resistance is based on the assumption of…
In the Strain Energy Density (SED) approach for fatigue strength assessments of welded joints a well-defined control volume is considered. This volume surrounds the weld root or weld toe, both modelled like sharp (zero radius) V-notches…
In this paper Digital Image Correlation (DIC) is used to study the evolution of the plastic zone close to a crack tip. A modified CT-specimen was used in order to fulfill the plane stress condition. The strain field around the crack tip…
This investigation revisits biaxial fatigue experiments carried out with the nickel-based superalloy termed Waspaloy. Recently, yield criteria extended to multiaxial fatigue and stress based approaches were analysed and their performance…
Elber assumed that the actual driving force for fatigue crack growth (FCG) is the effective stress intensity factor ΔKeff. To verify this hypothesis, both DC(T) and C(T) specimens are cut from a 6351-T6 Al alloy circular bar with two…
Fatigue damage and life assessment of multiaxial loadings is still an issue yet to resolve. Many methods have been proposed with promising agreements with the experimental results. However, the performance of such methods is, more than…
The Moment-Of-Inertia (MOI) method has been proposed by the authors to solve some of the shortcomings of convex-enclosure methods, when they are used to calculate path-equivalent ranges and mean components of complex non-proportional (NP)…
In this study, experimental and numerical results of compact tension shear (CTS) specimen and a new specimen type under in-plane mixed mode (Mode-I/II) loading conditions are compared with existing inplane mixed mode fracture criteria to…
The premature contact of crack surfaces attributable to the near-tip plastic deformations under cyclic loading, which is commonly referred to as plasticity induced crack closure (PICC), has long been focused as supposedly controlling…
Layered ceramic materials (also referred to as “ceramic laminates”) are becoming one of the most promising areas of materials technology aiming to improve the brittle behavior of bulk ceramics. The utilization of tailored compressive…
Most of the prior studies on the prediction of fatigue lives have been limited to uniaxial loading cases, whereas real world loading scenarios are often multiaxial, and the prediction of fatigue life based upon uniaxial fatigue properties…
A geometrically simplified plane elasticity problem of a finite small crack emanating from a thin interfacial zone surrounding the circular inclusion situated in the finite bounded domain is investigated. The crack is arbitrarily oriented…
In the last four decades, bonded composite repair has proven to be an effective method for addressing crack damage propagation. On the other hand, machine learning (ML) has made it possible to employ a variety of approaches for mechanical…
A double cantilever beam geometry has been chosen in order to investigate the importance of the higher-order terms of the Williams’ power expansion for the crack path estimation. The crack propagation has been tested experimentally on a…
A new approach has been developed and implemented to determine the main components of residual stresses that arise as a result of the contact interaction of a spherical indenter and a flat surface of composite plate made. The experimental…
In recent studies, piezoelectric actuators have been recognized as a practical and effective material for repairing cracks in thin-walled structures, such as plates that are adhesively bonded with piezoelectric patches due to their…
This paper presents the analysis of the temperature and exploitation time impact on the resistant measure to brittle fracture of welded joint constituents of the new and exploited low-alloyed Cr-Mo steel A-387 Gr. B from the aspect of…
In this study, a numerical strategy for predictive modelling of creep in tension tests for the rectangular plate with a single crack and CT-specimen based on the extended finite element method (XFEM) will be described in detail. A model of…
The work is devoted to experimental study of heat flow evolution at the fatigue crack tip during biaxial loading. The plane samples of titanium alloy Graid-2 with thick of 1 mm were weakened by notch to initiate fatigue crack at the center…
The paper analyses the fatigue tests of a specimen made of 16Mo3 steel and 6082-T6 aluminium alloy performed under bending and tensile conditions. It has been shown that in the case of bending of the 16Mo3 steel specimen, in low cycle…
