Tip: use quotes for an exact phrase, e.g. "teacher education"
The focus of manufacturing is more and more on innovative and application-oriented products considering lightweight construction. Hence, especially functional graded materials come to the fore. Due to the application-matched functional…
In this work, a micromechanical model is used in order to predict the failure surface of cement concrete subject to multi-axial compression. In the adopted model, the concrete material is schematised as a composite with the following…
Aluminium (Al) based composites enhance the mechanical and wear behavior by heat treatment. The quenching factors like cooling agent, cooling rate and temperature of cooling are expected to influence the hardness, tensile, and wear…
Additive layer manufacturing has recently gained a lot of interest due to the feasibility of producing metallic components directly from a computer-aided design file of the part. Selective laser melting, one of the main additive layer…
Numerical simulation by plastic deformation of the shaping processes currently has a large industrial interest. It allows you to shorten the time of design and construction related products and tools to analyze and to optimize processes.…
In the current studies an investigations were made to know the effect of 63 micron sized B4C particles addition on the mechanical and wear behavior of aerospace alloy Al2618 metal composites. Al2618 alloy with different weight percentages…
Additive manufacturing research is continuously growing, and this field requires a full improvement of the capability and reliability of the processes involved. Of particular interest is the study of complex geometries production, such as…
The focus of this research was to investigate the effects of carbon nanofiber (CNF) reinforcement on the mechanical performance, interfacial characteristics, and abrasive wear behavior of short glass fiber/polyphenylene sulfide (GF/PPS)…
The use of Ni-Ti alloys in the practice of endodontic comes from their important properties such as shape memory and superelasticity phenomena, good corrosion resistance and high compatibility with biological tissues. In the last twenty…
The use of temporary hip prosthesis made of orthopedic cement (spacer) in conjunction with antibiotics became a prevalent method used for prosthetic infections remedy; consequently, this method makes bone cement (PMMA) more fragile. Hence…
New biomedical supportive and lightweight structures require the creation of sustainable polymer composites of high strength and wear resistance. This research explores the use of alkali-treated pineapple leaf fiber (PALF) reinforced epoxy…
Abstract. In this article, the effect of nano-clay particles and heat-treating on thermo-mechanical fatigue (TMF) behaviors and failures of piston aluminum-silicon (AlSi) alloys was investigated. For this purpose, thermo-mechanical fatigue…
The quickly identify of fatigue limit of a mechanical component with good approximation is currently a significant practical problem not yet resolved in a satisfactory way. Generally, for a mechanical component, the fatigue strength…
In structural engineering, composite patch repairs are widely used to address cracked structures. However, their behavior under thermo-mechanical loading remains complex and less understood. This study examines the repair of a…
Currently, the reinforcement of ordinary concrete with synthetic fibers poses ecological problems because the manufacturing process of these products is very polluting. Plant fiber composites are a new challenge for environmental…
Development of aluminium composites by stircasting technique is an effective method for fabrication of better quality of MMCs. Stircasting technique is one of the most commonly accepted techniques. In this research work, Al6061 / TiB2+CeO2…
This study aims to assess the delamination effect and predict the evolution of damage in 3D printed specimens to investigate the mechanical behavior occurring due to the delamination of the layers of 3D printed thermoplastic polymers.…
This work investigated the effects of graphene and SiO2 addition on the mechanical and fracture properties of epoxy (80%) - Polylactic acid (PLA) (20 %) composites. Epoxy-PLA composites were loaded with graphene and SiO2 (0.1-0.5 wt. %…
The aim of this study is to analyze the effect of different geometries and sections on the mechanical properties of epoxy specimens. Five tensile tests were carried out on three types of series. The experimental results obtained were…
Aluminium composites are extensively used in several industrial applications. The production of Metal Matrix Composite (MMCs) with varying wt. % of reinforcement/s leads to enhancement of wear and mechanical behavior. In the present work…
In a series of applications, steel reinforced concrete structures are subjected to fatigue loads during their service life, what in most cases happens in corrosive environments. Surface treatments have been proved to represent proper…
Fatigue takes a place more and more important in the design of structures, it remains a key point in the mechanical dimensioning of structures. The Friction Stir Welding (FSW) process is regarded today as the most promising alternative to…
Among the various severe plastic deformation techniques, Equal Channel Angular Extrusion (ECAE) is a widely used method that introduces significant plastic deformation into a sample by forcing it through two intersecting channels, without…
Static traction tests on material samples for mechanical constructions have pointed out the loss of linearity of the specimen surface temperature with the applied load. This phenomenon is due to the heat generation caused by the local…
Aluminum composites with varied weight percentages of 0-2.5 B4C particles and micro- and nanoparticle sizes were fabricated by stir-casting. The material's mechanical and wear characteristics were evaluated. We used dry pin-on-disc wear…
The objective of the present paper is to investigate the stress-controlled low-cycle fatigue behavior of piston aluminum-silicon (AlSi) alloy reinforced with nano-clay particles and T6 heat-treatment. The piston aluminum-silicon alloy…
Semi–empirical notch sensitivity factors q have been widely used to properly account for notch effects in fatigue design for a long time. However, the intrinsically empirical nature of this old concept can be avoided by modeling it using…
The present paper describes a novel experimental technique recently presented that allows one to study interactions between the crack and microstructural barriers with an unprecedented level of ease and detail. The method consists in…
Lately porous shape memory alloys (SMA) have attracted great interest as low weight materials characterized by high energy dissipation capability. In the present contribution a micromechanical study of porous SMA is proposed, introducing…
There have been incidents recently where stress corrosion cracking (SCC) observed in the dissimilar metal weld (DMW) joints connecting the reactor pressure vessel (RPV) nozzle with the hot leg pipe. Due to the complex microstructure and…
Modern technological capabilities make it possible to produce 3D spatially-reinforced for polymer composite materials. The tasks of experimental research and analysis of the deformation process of new composite materials for aviation…
This article presents the bending fatigue behavior and the scatter-band analysis of aluminum alloys under beneficial conditions of nano-clay-particles and heat-treating, compared to detrimental conditions of the mechanical stress and the…
This study investigates the mechanical behavior of 3D-printed polyethylene terephthalate glycol (PETG) polymer specimens subjected to tensile and shear testing, with a particular focus on the influence of raster orientation and shell…
Aluminum alloys are widely used in the automobile industry because of their excellent mechanical strength, low weight, and remarkable resistance to corrosion and wear. The purpose of this study is to investigate how the microstructure…
The purpose of this study is to investigate the influence of hybrid nanoparticle reinforcement with Al2O3 and ZrO2 on the mechanical and wear parameters of Al6061 alloy-based Nano composites. MMC’s (Metal Matrix Composite) specimens were…
Stir casting technique has been used in the current study to process Al6061 reinforced with TiC particles of different concentrations. The processed compounds' composition of TiC and Al6061 has been verified by Energy Dispersive X-Ray…
Having Low density and being Light weight with better mechanical properties, aluminum is the most significant material and is universally used in highly critical applications like navy, aerospace and particularly automotive activities.…
The hydrophilic nature of bamboo fiber makes them prone to moisture uptake and subsequent property degradation. In this study, bamboo fiber–epoxy composites were hybridized with clamshell-derived particulate fillers to mitigate the adverse…
The delamination fracture in four-point bending beams made of adhesively bonded lengthwise vertical layers is studied assuming that each layer exhibits smooth material inhomogeneity along the width and length of the layer. The study aims…
The object of this article is to be able to simulate the behavior of reinforced and/or prestressed concrete beam’s section in the shear loading through a model allowing the evaluation of nonlinear strains caused by shear, while taking into…
The present work aims to model the fracture mechanical behavior of a high-strength low carbon steel, AISI 4130 operating in hydrogen contaminated environment. The study deals with the development of 2D finite element cohesive zone model…
The main objective is to model the behavior of 7075 aluminum alloy and built an experimental database to identify the model parameters. The first part of the paper presents an experimental database on 7075 aluminum alloy. Thus, uniaxial…
Bamboo and wood are the most widely applied and the oldest natural structural materials in the world. Currently, worldwide output of wooden material is 1 billion ton, almost the same as steel. Most of them are used as structure, such as…
The aim of this work was to evaluate the influence of temperature on the mechanical behavior of an amorphous polymer, namely acrylonitrile butadiene styrene (ABS), based on a series of uniaxial tensile tests on smooth specimens at…
Al composites usage is growing and is gaining importance in aerospace, automotive and marine industries due to their excellent characteristics. Aluminum composites exhibit high resistance to wear and corrosion, possess high strength, offer…
This paper presents a study on the tensile, fracture, damage, and reliability properties of 3D printed polylactic acid (PLA), based on a series of experiments. The study focuses on polylactic acid (PLA) samples produced using fused…
The purpose of this study was to understand the behavior of martensitic H13 steel in accordance with the microstructural evolution, mechanical properties and wear in repeated tempering cycles. The microstructures were characterized by axio…
In recent years, mechanical property of many SMA has improved in order to introduce these alloys in specific field of industry. Main examples of these alloys are the NiTi, Cu-Zn-Al and Cu-Al-Ni which are used in many fields of engineering…
The objective of this study is to analyze the performance of composite bonding repair, hole drilling and the combination of the two techniques (hybrid repairs) by tensile tests and to show the interest of a hybrid repair versus to other…
The post-curing process of cured composites is essential in enhancing the strength, stiffness, elevating the glass transition temperature, and reducing residual stress in polymer thermoset composites. The curing temperature and time are…
