Tip: use quotes for an exact phrase, e.g. "teacher education"
A geometrically simplified plane elasticity problem of a finite small crack emanating from a thin interfacial zone surrounding the circular inclusion situated in the finite bounded domain is investigated. The crack is arbitrarily oriented…
This article deals with the locally multiaxial fatigue behaviour of high strength steel. To this end, the influence of the cracking path deflections (at the micro level) on the plasticity-induced fatigue crack growth is analyzed. With…
In the past several numerical studies have addressed the ductile mode of fracture propagation. However, the brittle mode of pipeline failure has not received as much attention yet. The main objective of this study is to predict brittle…
This work is devoted to the development of an experimental method for studying the energy balance during cyclic deformation and fracture. The studies were conducted on 304 stainless steel AISE and titanium alloy OT4-0 samples. The…
During the last years many researchers put so much effort to design layered structures combining different materials in order to improve low fracture toughness and mechanical reliability of the ceramics. It has been proven, that an…
For various configurations examined in a series of fatigue experiments on thin-walled tubes under tension and torsion, the experimental results – crack path, crack growth life, near crack tip deformations, and crack closure – are measured…
The structural integrity and reliability of glass components are key issues for concentrated solar power (CSP) systems. For example, the glass windows in a solar furnace may suffer catastrophic fracture due to thermal and structural…
The aim of this work is the study of the effect of the finishing of the edge of glass when it has a structural function. Experimental investigations carried out for glass specimens are presented. Various series of annealed glass beam were…
Presently, Functionally Graded Materials (FGMs) are extensively utilised in several industrial sectors, and the modelling of their mechanical behaviour is consistently advancing. Most studies investigate the impact of layers on the…
This study aims to investigate the delamination effect of a metal sandwich panel using a four-point bending simulation under continual spectrum loading. The most recent core designs of the sandwich panel have a cavity that can increase…
A complete set of eigensolutions is constructed for different variants of circular conical bodies: homogeneous cone with one lateral surface (solid cone), homogeneous cone with two lateral surfaces (hollow cone) and composite cone for…
Paper describes in detail and gives example of the probabilistic assessment of a steel structural element subject to fatigue load, particular attention being paid to cracks from the edge and those from surface. Fatigue crack damage depends…
An important topic of the Collaborative Research Centre TRR 30 of the Deutsche Forschungsgemeinschaft (DFG) is the crack growth behaviour in graded materials. In addition, the growth of cracks in the neighbourhood of regions and through…
Conducting experiment on embankment model by shaking table could be an accurate method to evaluate the behavior of embankment or any structures under seismic loading. In this research work, in order to assess the function of seismic force…
The exhaustion of constructive ways for increasing the service life of parts has led to the development of new methods which can improve their material properties during operation under various loading conditions. Laser shock peening (LSP)…
Part-through surface or corner 2D cracks are commonly found in structural components, even because practically all fatigue cracks tend to start this way. It is a reasonable hypothesis to model them assuming the shape of their fronts is…
In this paper, the stress intensity factor (SIF) is computed in a circumferentially-cracked round bar (CCRB) subjected to tensile loading, considering that the resistant ligament is circular and exhibits certain eccentricity in relation to…
The quickly identify of fatigue limit of a mechanical component with good approximation is currently a significant practical problem not yet resolved in a satisfactory way. Generally, for a mechanical component, the fatigue strength…
Radiation effects lead to significant reduction in ductility during the life of the components used in nuclear reactors. Sharp change in fracture toughness at lower temperature in Body Centered Cubic (BCC) materials as compared to Face…
In order to reveal the differences and conversion relations between the tensile, compressive and flexural moduli of cement stabilized macadam, in this paper, we develop a new test method for measuring three moduli simultaneously. By using…
A fatigue test on a full scale panel with complex loading condition and geometry configuration has been carried out using a triaxial test machine. The demonstrator is made up of two skins which are linked by a transversal butt-joint…
Onyx ® is a new material composed of Polyamide 6 reinforced with short carbon fiber, used in the novel additive manufacturing composites technique. This paper aims to present the axial fatigue performance of this material with and without…
Digital image correlation (DIC) is a technique in experimental mechanics to acquire full-field measurement data of displacements and deformations from the surface of specimens or components. Especially for the investigations of cracks it…
The work is devoted to experimental study of heat flow evolution at the fatigue crack tip during biaxial loading. The plane samples of titanium alloy Graid-2 with thick of 1 mm were weakened by notch to initiate fatigue crack at the center…
The reduced state of stress triaxiality observed in shallow cracked components allows an increased capacity to resist crack propagation compared to that observed in deeply cracked specimens. This may be regarded as a higher fracture…
Magnesium (Mg) alloys are attractive as structural materials due to their light weight and high specific strength. It is well known that Mg alloy has hexagonal close-packed (HCP) structure and only basal slip or twinning can operate during…
The aim of this study was to investigate the effect of thickness of energy director (EDs) and ultrasonic welding (USW) process parameters on structure formation and interlaminar shear strength (LSS) values of lap-joints of composite…
This work is dedicated to the development of a fracture model for an elastic-brittle solid with statistically distributed strength characteristics of subregions and the application of this model to describe fracture processes of bodies…
10.3221/IGF-ESIS.74.05
The Moment-Of-Inertia (MOI) method has been proposed by the authors to solve some of the shortcomings of convex-enclosure methods, when they are used to calculate path-equivalent ranges and mean components of complex non-proportional (NP)…
Delay fracture is an environmental embrittlement occurring when materials, environment and stress interact with each other and also a form of hydrogen induced material deterioration. It is a leading factor inhibiting the further…
The microstructural origins of premature fatigue failures were investigated on a variety of forged components manufactured from AZ80 and ZK60 magnesium, both at the test specimen level and the full-scale component level. Both stress and…
Biodegradable stents are attracting the attention of many researchers in biomedical and materials research fields since they can absolve their specific function for the expected period of time and then gradually disappear. This feature…
In this investigation the extent of the plastic zone size ahead of a crack-tip in single edge notched tension (SENT), compact tension (CT) specimens has been examined experimentally by micro-hardness technique and by elastic-plastic finite…
In this paper, determination of the accurate notch stress intensity factors (NSIFs) have been demonstrated using a recently proposed technique: The point substitution displacement technique (PSDT) for the sharp Vnotched configurations. In…
This investigation revisits biaxial fatigue experiments carried out with the nickel-based superalloy termed Waspaloy. Recently, yield criteria extended to multiaxial fatigue and stress based approaches were analysed and their performance…
In the last four decades, bonded composite repair has proven to be an effective method for addressing crack damage propagation. On the other hand, machine learning (ML) has made it possible to employ a variety of approaches for mechanical…
This research discusses the micromechanical modelling for thermoplastic composite material. Elastoplastic and damage model for PEEK matrix composite with the dependency of properties to stress state is presented. Plasticity initiation…
The role of some geometrical characteristics of the notches machined in circular discs, in order to determine the mode-I fracture toughness of brittle materials, is discussed. The study is implemented both analytically and numerically.…
A numerical study on the influence of contact parameters on fretting fatigue behavior is carried out by using a new method SFEM (Stretching Finite Element Method) is presented in this article. Several parameters are made to vary: geometric…
The influence of temperature on the fatigue properties of pseudoelastic NiTi under low-cycle fatigue are investigated. Tests were performed under the uniaxial tensile deformation (pull-pull) at 0°С and 20°С which is above the austenite…
Biaxial tension-torsion fatigue tests are carried out on the membrane material Nafion 115 (perfluorosulfonic acid, PFSA). This polymeric material is used in fuel cells as proton exchange membrane, undergoing frequently mechanical loading…
In this paper, a fatigue strength analysis approach based on Goodman-Smith fatigue limit diagram （GSFLD） and reliability theory is proposed to solve the problem that the traditional fatigue strength analysis of bogie frame is too…
This paper presents the analysis of the temperature and exploitation time impact on the resistant measure to brittle fracture of welded joint constituents of the new and exploited low-alloyed Cr-Mo steel A-387 Gr. B from the aspect of…
The aim of this study is to investigate whether exercise can reverse some of the adverse effects of high-fat-diet-induced obesity on lipid metabolism and bone biomechanical properties. A total of 26 adult male C57bl/6J mice were randomly…
In the cohesive framework, a stress-state dependent cohesive model, combined with an irreversible damage parameter has been used in simulation of fatigue crack growth initiation and continued growth. The model is implemented as interface…
The present work summarizes a numerical procedure aimed at the evaluation of the residual strength of a cracked lap joint, based on the competing failure mechanisms regulated by the R-curve analysis and plastic collapse. The model adopted…
The paper deals with the investigation of the temporal instabilities and spatial localization due to the Lüders behavior and the Portevin–Le Chatelier effect in the carbon steel C1010 and the aluminummagnesium alloy AA5052, which manifest…
In the present work, the stress intensity factor (SIF) of a small embedded square-like flaw is calculated by means of a procedure based on the Oore-Burns integral. An explicit equation is given to evaluate the SIF along the two axes of…
Most mechanical components experience multi-axial cyclic loading conditions during service. Experimental analysis of fatigue cracks under such conditions is not easy and most works tend to focus more on the simpler but less realistic case…
A 2D bond-breaking model is presented that allows the extraction of the intrinsic line or edge energy, fracture toughness, and strain energy release rate of graphene from measured and calculated 2D Young’s moduli and 2D pristine strengths.…
