Tip: use quotes for an exact phrase, e.g. "teacher education"
The stress state of the elastic fixed semi-strip with the regarding of the singularities at its edge is investigated in the article. The initial boundary problem is reduced to a vector boundary problem in the transformation’s domain by the…
This paper presents a novel integral abutment design incorporating a composite dowel girder and H-shaped steel pile abutments to enhance load-bearing capacity and construction efficiency. Numerical analysis is conducted to investigate the…
In this article the plain elasticity problem for a semi-strip with a transverse crack is investigated in the different cases of the boundary conditions at the semi-strip’s end. Unlike many works dedicated to this subject, the fixed…
The mixed mode loading configuration occurs in many civil engineering and mechanical applications. In wood material, the study of this problem is very important due to the orthotropic character and the heterogeneity of the material. In…
Digital image correlation (DIC) is a technique in experimental mechanics to acquire full-field measurement data of displacements and deformations from the surface of specimens or components. Especially for the investigations of cracks it…
During fatigue crack propagation experiments with constant force as well as constant stress intensity lock in thermography and heat flow measurements with a new developed peltier sensor have been performed. With lock in thermography space…
In the present study, structural integrity of SA312 Type 304 LN steel welded pipes with through-wall crack under monotonic loading has been assessed using failure assessment diagram (FAD). Plastic capacity utilization and fracture capacity…
The compliance method was first applied to short rod specimens to determine the nonlinear fracture toughness of rock materials by ISRM (International Society for Rock Mechanics) in the 1980s. In this study, utilizing the techniques of the…
Crack initiation and propagation have been investigated on the polymeric material ABS (Acrylonitrile Butadiene Styrene), under ultrasonic fatigue testing. Three controlled actions were implemented in order to carry out fatigue tests at…
Motivated by the dramatic worsening and uncertainty of orbital debris situation, the present paper is focused on the structural integrity of the spacecraft pressurized modules/pressure vessels. The objective is to develop an engineering…
An exact solution of the stationary thermoelasticity problem about interfacial circular absolutely rigid inclusion, which is in the smooth contact conditions in a piecewise homogeneous transversely homogeneous space, is constructed. The…
This paper investigates the variations of mode I stress intensity factor (KI) for inner penny-shaped and circumferential cracks in functionally graded solid and hollow thick walled cylinders, respectively with the changes of crack…
This paper for the first time presents an equation for calculating the mechanical fracture energy of the polymeric composite material (PCM) with regard to the basic formulation parameters. By means of the developed computer program the…
Fatigue life tests under constant and variable amplitude loadings were performed on the tube-tube thin-walled welded specimens made of magnesium (AZ31 and AZ61) alloys. The tests included pure axial, pure torsional and combined in-phase…
In fracture mechanics (domain of cracked environments), it is concerned to forecast the behavior of the structures until their ruin. Friction Stir Welding (FSW) is a new process for solid-state joining, it can weld high strength aluminum…
This work aims to study the crack propagation in 12%Cr steel for turbine disks. Creep Crack Growth (CCG) tests on CT specimens have been performed to define the proper fracture mechanics which describes the initiation of the crack…
The paper deals with the Stress Intensity Factor assessment of cracks at the intersection of holes loaded by internal pressure. Triangular flaws are considered at the intersection of two holes inside a specific specimen. The research…
In this study, the influences of crack parameters like crack location from the left end, crack height, number of cracks and the magnitude of mass and the velocity of the transit load on the vertical displacements of the cracked simply…
This paper presents an application of the boundary element method to the analysis of crack growth problems in linear elastic fracture mechanics and the correlation of results with experimental data. The methodology consists of computing…
The paper presents a study of the application of Leak-Before- Break (LBB) concept in a relatively small-diameter high energy reactor coolant line, where it is proposed type AISI 316LN to be used as base material welded with type AISI 316L…
Predicting the failure of carbon fiber composites remains a challenge due to the complex evolution of damage, where the collective behavior of defects like pores and microcracks dictates material strength. The objective of this work is to…
Elastic fracture mechanics commonly defines the fracture resistance of brittle materials within an idealised picture of planar and traction free cracks. An efficient approach to describe the interface conditions in real cracks, such as…
In this paper, an additional criterion was introduced to evaluate the composite repair systems using the limit load analysis. The plastic collapse pressure of API 5L X65 PSL2 steel pressure vessel structure with crack defect is numerically…
Nodular cast iron (GJS) represents one of the most widely used materials for vehicle, energy and heavy machinery industry. Nevertheless, foundries struggling with the influence of local material defects in GJS like pores, shrinkages and…
This study develops stress intensity factor (SIF) solutions for cladded WWER reactor pressure vessel nozzles subjected to pressurised thermal shock loading. Although finite element analysis is widely used for fracture assessment…
In the present work, the stress intensity factor (SIF) of embedded small cracks placed at the weld toe is calculated by means of two procedures based on the Oore-Burns integral. In the first approach, the defect is considered as a circular…
In the last decade, several studies have been introduced to the development and use of compressed earth blocks in green building construction. Studying the evaluation of existing cracks in construction builders by these blocks is an…
In this article the discontinuous solutions of Lame’s equations are constructed for the case of a conical defect. Under a defect one considers a part of a surface (mathematical cut on the surface) when passing through which function and…
In this study, the three-dimensional finite element method is used to analyze an API 5L X70 steel cylindrical pipeline subjected to an internal pressure load by calculating the stress intensity factors and the integral J at the peak of…
The objective of this work is to study the effects of contact parameters on the cracking parameters of a specimen and a pad assembly. These parameters have been studied and evaluated by the finite element method analysis in two dimensions…
The Boussinesq solution, one of the fundamental problems in the theory of elasticity, enables an analysis of stresses and strains (displacements) in a semi-elastic space subject to surface loads. This solution has a form of formulas for…
The exact solution of the uncoupled thermoelasticity problem for a semi-infinite elastic layer with regard of its proper weight was constructed. The solving method is differ from the known previous and is based on reducing of Lame…
In the present work, the stress intensity factor (SIF) of a small embedded square-like flaw is calculated by means of a procedure based on the Oore-Burns integral. An explicit equation is given to evaluate the SIF along the two axes of…
A geometrically simplified plane elasticity problem of a finite small crack emanating from a thin interfacial zone surrounding the circular inclusion situated in the finite bounded domain is investigated. The crack is arbitrarily oriented…
