Tip: use quotes for an exact phrase, e.g. "teacher education"
Cost effective improvement of the mechanical performances of structural materials is an important goal in construction industry. To improve the flexural strength of plain concrete so as to reduce construction costs, the addition of fibers…
In this study, Al2O3 microparticle was used as a filler for pineapple fiber reinforced composites with different matrix polymers. The effect of Al2O3 microparticles in the epoxy and unsaturated polyester matrix on the mechanical, physical…
The paper presents an experimental investigation of the flexural behaviour of reinforced concrete (RC) beam elements strengthened externally with stainless steel wire mesh (SSWM). SSWM has the potential to be an alternative composite…
Developing a reliable numerical modelling technique is considered as challenge for fracture assessment of the geological materials, which are much subjected to hydrostatic pressure. For this purpose, the mechanical behaviour and the…
Cement and concrete composites are inherently brittle and exhibit very less tensile/flexural strength capacity as compared to their compressive strength. Use of thoroughly dispersed carbon nanotubes in the concrete matrix is one of the…
Adding short carbon fiber reinforcement to thermoplastic matrices can improve the mechanical performance of additively manufactured polymer-based composites. This work examines the flexural behavior of Fused Deposition Modeling…
In this work, an experimental and numerical program was designed to evaluate the role of compressive strength, Fc, and area of reinforcing steel, As, on the flexural behavior of functionally graded reinforced concrete beams. Eighteen…
This paper experimentally investigates the effect of steel and glass fibers on the engineering properties of concrete. To achieve this, 0.3%, 0.6%, and 0.9% by volume fraction of steel and glass fibers are added in concrete mixtures with…
Recent developments in the field of replacing and generating human tissues have led to a renewed interest in finding alternative materials or composites that enhance the development of these technologies. Therefore, the main goal of the…
Hybridization of natural fiber composite by incorporating waste- derived fillers has been identified as a promising sustainable technique to develop environmentally friendly and economical composites with enhanced mechanical properties.…
Reinforced concrete has a weakness for corrosion which can cause the concrete to crack and the concrete structure to fail. To overcome this problem, a self-healing concrete method is needed that can close cracks and inhibit the rate of…
The hydrophilic nature of bamboo fiber makes them prone to moisture uptake and subsequent property degradation. In this study, bamboo fiber–epoxy composites were hybridized with clamshell-derived particulate fillers to mitigate the adverse…
The interest of using combined sand of equal percentage of silica and limestone becomes evident in the formulation of compacted concrete in several previous works around the world, due to the formidable percentage of fines that improves…
In this study, mix proportion parameters of high strength concrete (HSC) were analyzed by using the Taguchi’s experiment design methodology for optimal design. For that purpose, mixtures are designed in a L27 orthogonal array with six…
The present study aims to develop a novel hybrid composite by incorporating clamshell as a secondary reinforcing filler into a bamboo-epoxy composite. The primary objective of this hybridization is to optimize the synergistic benefits of…
This study investigates the effects of low concentration (0.1-0.4 wt.%) nano-boron carbide (B4C) reinforcement on the mechanical, thermal and fracture properties of epoxy nanocomposites. The nanocomposites were prepared via solution…
Concretes with water to cement (or binder) ratios of 0.50. 0.40, 0.30 and 0.20 were prepared and long-term mechanical properties were measured. Porous light-weight aggregates (LWA) in dosages of 10 % and 20 % were used for self-curing…
Natural stone is a material that presents durableness over time and high aesthetic characteristic, but it is brittle and its tensile strength is significantly lower than compressive one: these peculiarities must be taken into account for…
Currently, the reinforcement of ordinary concrete with synthetic fibers poses ecological problems because the manufacturing process of these products is very polluting. Plant fiber composites are a new challenge for environmental…
New biomedical supportive and lightweight structures require the creation of sustainable polymer composites of high strength and wear resistance. This research explores the use of alkali-treated pineapple leaf fiber (PALF) reinforced epoxy…
This study examines the influence of graphene nanoplatelets (GNPs) and multi-walled carbon nanotubes (MWCNTs) on the mechanical properties of SiO2-loaded epoxy-polylactic acid (PLA) composites. Epoxy and PLA were mixed to form the matrix…
Our research described in this paper focused on fabricating and characterising polylactic acid (PLA) composites reinforced with randomly dispersed boron nitride nanoplatelets (BNNP). The integrated experimental analysis with the Finite…
Industry needs new materials that present very high structural characteristic, such as high strength, low weight and high damage tolerance. To obtain these characteristics a new class of materials has been introduced: Fibre Metal Laminate…
Bendable concrete is also defined as engineered cementitious composites because of its great ductility and tight fracture width limitation. ECC mixtures by adding additional Portland cement, silica sand and fly ash, fiber types…
Experimental and numerical programs were invoked to investigate the effect of concrete cover and area of main steel reinforcement on the flexural behavior of strengthened RC beams by near-surface mounted glass fiber reinforced polymeric…
Magnetized water (MW) is one of the most effective and economical ways to improve the properties of self-compacting concrete (SCC). Therefore, the aim of this study is to improve the fresh, mechanical, and microstructural properties of SCC…
This article presents the results of a comparative experimental study on the influence of date palm fibers to replace polypropylene fibers used as reinforcement in self-compacting concrete (SCC). Indeed, the use of polypropylene fibers…
This study investigates jute fibre reinforced epoxy composites fabricated using a controlled vacuum bag moulding process, with emphasis on establishing reliable structure property relationships relevant to sustainable engineering…
Though the principle of orthogonal experimental design, the uniaxial compression experiment and uniaxial tensile experiment were carried out on nine groups of high toughness cementitious composites with different mixing ratios to study the…
This study examines the rehabilitation performance of reinforced concrete bubble deck slabs (with 50 mm and 60 mm voids) strengthened with externally bonded CFRP sheets. Nine specimens were tested: eight bubble slabs (grouped by void size…
Concrete is one of the most widely used materials in the world. Still, its production processes, energy consumption, and high use of raw materials make it one of the most environmentally harmful materials. This study aims to enhance the…
The use of bonded externally polymer reinforced fiber (FRP) Laminates has been introduced as an effective approach in rehabilitating (RC) structures due to their high strength, corrosion resistance, reduced weight, and ease of use. This…
In recent decades, one can observe a great increase in the replacement of traditional materials with polymer composites in high-strength and lightweight applications. High fuel consumption by automobile and aerospace vehicles built from…
An experimental investigation of the mechanical and fracture characteristics of Portland limestone and Corsehill sandstone is undertaken, aiming at enhancing understanding of the structural behaviour of these natural building stones…
Magnetic nanocomposites on the basis of water soluble unsaturated polyester resin filled with different amount of iron oxide nanoparticles have been successfully prepared. The mechanical properties of thus prepared composites as tensile…
The present study concerns the experimental investigation of foamed concretes with 1600 kg/m3 density that incorporate biochar additions in the mix. A series of small notched beams are prepared to determine the fracture energy in CMOD…
In this research, the finite element method is used to develop a numerical model to analyse the effect of the external strengthening of reinforced concrete beams by using carbon Fiber Reinforced Polymer (CFRP) sheets. A finite element…
In this paper, fly ash, ladle furnace slag and limestone filler were utilized in concrete used as material for additive manufacturing (3D printing). Fly ash and ladle furnace slag were used as a replacement of cement (30% wt.) and…
This study investigates the structural behaviour of elements produced by extrusion-based 3D concrete printing (3DCP). Six full-scale columns with intentional imperfections were tested in three-point bending and subsequently analysed…
The use of Areca sheath in developing a newer composite material is proposed in this article. The Areca sheath particulates are extracted by pulverizing long sheaths into different sizes of particulates and are reinforced into the epoxy to…
In this study, a multi-parameter analysis, using Taguchi method for design of experiments, has been conducted to investigate the optimum curing conditions for GNPs/E-glass fabric/epoxy laminated nanocomposites. The independent variables in…
This study investigates the physico-mechanical properties, mineralogical composition, deterioration processes, weathering patterns, and durability of building materials in the Ottoman Fort of Tamentfoust, Algiers, to inform heritage…
This work investigated the effects of graphene and SiO2 addition on the mechanical and fracture properties of epoxy (80%) - Polylactic acid (PLA) (20 %) composites. Epoxy-PLA composites were loaded with graphene and SiO2 (0.1-0.5 wt. %…
This investigation means to predict and modeling the fresh and hardened concrete behavior containing fine aggregates from concrete and brick wastes, for different recycled aggregates substitution rates. To succeed this, the design of…
The core of the present work concerns the analysis of the failure mode and the fracture process induced by the flexural load in Fibre Metal Laminates (FMLs). The influence of the connection layer placed between the composite ones and the…
Adopting novel sandwich structures with FRP (Fibre Reinforced Polymer) skins and a metallic lattice core, both of which have high specific strength and stiffness, is one way to achieve better mechanical performance while remaining…
The present experimental study includes testing thirteen reinforced concrete beams with openings at different locations to investigate the efficiency of strengthening such openings. Different strengthening techniques around the opening…
This work focuses on the mechanical characterization of the inorganic matrix used for Fiber-Reinforced Cementitious Matrix (FRCM) composites, nowadays widely used to retrofit existing reinforced concrete and masonry structures. While…
The importance of delamination detection can be understood from aircraft components like Vertical Stabilizer, which is subjected to heavy vibration during the flight movement and it may lead to delamination and finally even flight crash…
The post-curing process of cured composites is essential in enhancing the strength, stiffness, elevating the glass transition temperature, and reducing residual stress in polymer thermoset composites. The curing temperature and time are…
