Tip: use quotes for an exact phrase, e.g. "teacher education"
A criterion for the prediction of the static failure loads in tensile PMMA specimens with sharp notches is presented. The proposed criterion is based on a regularized version of the eXtended Finite Element Method (XFEM), which has been…
The Strong Formulation Finite Element Method (SFEM) is a numerical solution technique for solving arbitrarily shaped structural systems. This method uses a hybrid scheme given by the Differential Quadrature Method (DQM) and the Finite…
In this study, finite element modeling and experimental studies on a mode-I/III specimen similar to the compact tension specimen are presented. By using bolts, the specimen is attached to two loading apparatus that allow different levels…
A generalized numerical model for predicting the structural integrity of self-anchored cable-stayed suspension bridges considering both geometric and material nonlinearities is proposed. The bridge is modeled by means of a 3D finite…
In this study, multiple and non-planar crack propagation analyses are performed using Fracture and Crack Propagation Analysis System (FCPAS). In an effort to apply and validate FCPAS procedures for multiple and non-planar crack propagation…
In this study, to investigate and understand the nature of fracture behavior properly under in-plane mixed mode (Mode-I/II) loading, three-dimensional fracture analyses and experiments of compact tension shear (CTS) specimen are performed…
Very often computations on structural elements or machine components subjected to variable loading require using an advanced finite element model. This paper reports the numerical implementation of a model for multiaxial cyclic…
This paper presents a refined Finite Element (FE) modeling strategy for analyzing the failure behavior of regular masonry structures reinforced with timber-based retrofit solutions. The proposed model schematizes the masonry as brick…
Reinforced concrete (RC) members strengthened with externally bonded fiber-reinforced-polymer (FRP) plates are numerically investigated by a plasticity-based limit analysis approach. The key-concept of the present approach is to adopt…
The present work aims to model the fracture mechanical behavior of a high-strength low carbon steel, AISI 4130 operating in hydrogen contaminated environment. The study deals with the development of 2D finite element cohesive zone model…
Bolted joints are the most common solution for joining composite components in aerospace structures. Critical structures such as wing to fuselage joints, or flight control surface fittings use bolted joining techniques. Recent research…
This paper analyses the influence that the type of geometry used to obtain the stress/strain fields in a cylindrical contact has on fretting fatigue life predictions. In addition, this work considers the effect that the fatigue crack shape…
Since the end of the last century a lot of research on ductile damaging and fracture process has been carried out. The interest and the attention on the topic are due to several aspects. The margin to reduce the costs of production or…
This paper is devoted to the analysis of the load path effect on I+II+III mixed mode fatigue crack propagation in a 316L stainless steel. Experiments were conducted in mode I+II and in mode I+II+III. The same maximum, minimum and mean…
A three-dimensional crack propagation simulation is performed by the Dual Boundary Element Method (DBEM). The Stress Intensity Factors (SIFs) along the front of a semi elliptical crack, initiated from the external surface of a hollow axle…
The linear elastic analysis of cracked bodies is a Twentieth Century development, with the first papers appearing in 1907, but it was not until the introduction of the stress intensity factor concept in 1957 that widespread application to…
Results of a double-shear single-dowel wood connection tested under monotonic quasi-static compression loading are presented and discussed in this paper. The wood used in this study was a pine wood, namely the Pinus pinaster species, which…
The modified compact tension (MCT) test, though not yet recognized as a valid test for determining fracture energy of concrete, is believed to represent a plausible and suitable alternative versus other well established procedures, such as…
It is well known that the reinforcement of the Soil is considered as a solution to its stability problems. This technique ameliorates the mechanical and physical comportment of the soil. Based on this, this research paper aims at…
The role of some geometrical characteristics of the notches machined in circular discs, in order to determine the mode-I fracture toughness of brittle materials, is discussed. The study is implemented both analytically and numerically.…
In recent years, 3D printing technology has assumed an important role in advanced construction processes across various engineering fields. Among these, the application to the architectural restoration of historic structures is…
This work is dedicated to the numerical study of the influence of the parameters of statistical distribution of the structural elements’ ultimate strength on fracture processes of deformable bodies with stress concentrators. The loading…
The usage of rebars in construction is the most common method for reinforcing plain concrete and thus bridging the tensile stresses along the concrete crack surfaces. Usually design codes for modelling the bond behaviour of rebars and…
The investigation of low-cycle fatigue behaviour of lotus-type porous material is presented in this paper. Porous materials exhibit some unique features which are useful for a number of various applications. This paper evaluates a…
In this work, powder compaction process was investigated by using a numerical material model, which involves Mohr-Coulomb theory and an elliptical surface plasticity model. An effective algorithm was developed and implemented in the ANSYS…
Crack propagation in gears is a problem related not only to the life of the components, but also to the concept of failsafe design. Fail safe design means to design a component in order that, if a failure occurs, this may cause a “safe…
The paper is aimed at the indicative evaluation of the effect of random scatter of input parameters in case of durability of reinforced concrete bridge deck. The time to onset of corrosion of steel reinforcement of concrete bridge deck…
In this work, a link between the averaged strain energy density (SED) approach and the peak stress method in the case of cracks subjected to mixed mode (I+II) loading has been investigated. Some closed-form expressions of the strain energy…
In this work, a link between the averaged strain energy density (SED) approach and the peak stress method in the case of cracks subjected to mixed mode (I+II) loading has been investigated. Some closed-form expressions of the strain energy…
In the present work we present some results of numerical experiments obtained with a variational model for quasi-static Griffith-type brittle fracture. Essentially the analysis is based on a recent formulation by Francfort and Marigo the…
The fivefold symmetric modular stellarator Wendelstein 7-X (W7-X) is currently under construction in Greifswald, Germany. The superconducting coils of the magnet system are bolted onto a central support ring and interconnected with five…
In this paper, the phenomenon of intergranular fracture in polycrystalline materials is investigated using a nonlinear fracture mechanics approach. The nonlocal cohesive zone model (CZM) for finite thickness interfaces recently proposed by…
In this work, the small-strain elastoplastic behavior of structures is analyzed using an improved nonlinear finite element formulation. In this framework, an eight-node quadrilateral finite element denoted PFR8 (Plane Fiber Rotation) that…
Our research described in this paper focused on fabricating and characterising polylactic acid (PLA) composites reinforced with randomly dispersed boron nitride nanoplatelets (BNNP). The integrated experimental analysis with the Finite…
This work is devoted to the fracture processes numerical modeling of elastic-brittle bodies taking into account the statistical distribution of subregions strength values and stress concentration. The novel formulation of the boundary…
The paper presents an experimental investigation of the flexural behaviour of reinforced concrete (RC) beam elements strengthened externally with stainless steel wire mesh (SSWM). SSWM has the potential to be an alternative composite…
Damage to tunnels caused by explosions may damage the support structure and the stability. This damage is due to either blasting the working face for drilling progress or an explosion inside the tunnel. The present study investigates the…
The modeling of the welding is desirable to guess the deformation of the components during manufacture, the position and the magnitude of maximum residual stresses and to envisage metallurgical effects in specific zones. The welding are…
Elbows under load experience more stress and strain than straight tubes. The strength of the composite tubes plays an important role in their use, the damage under a thermomechanical behavior of a composite tubular structure bent between…
In the present study, Composite material consisting of an elastic homogeneous isotropic matrix in which are embedded coated elastic isotropic inclusions, widely used in many applications is investigate by homogenization approach coupled to…
Fracture behavior of adhesive joints is an important topic in structural design of new structural elements or in retrofitting of existing ones. The mechanical models available in literature capable of predicting the failure mode of these…
The study of salt rocks deformation and fracture processes is an essential part of mining parameters justification for mineral salt deposits. The results of uniaxial compression tests on large salt rock specimens are presented as a loading…
An original simplified constitutive model is proposed to simulate the effects of ballistic impacts on blocks of synthetic muscle simulant based on mineral oil and styrene ethylene-butylene styrene polymers (SEBS) as a convenient substitute…
This paper presents numerical models of a 3D printed plastic joint applicable to the connection of wooden structures. The research presented provides a comparison of two alternative solutions for the geometry of the joint and results from…
A great deal of research has been conducted to improve the understanding of the behavior of new types of shear connectors. This article presents the study of I-shaped connectors behavior under monotonic load welded in four different…
Cold-formed steel (CFS) structural members retain their positions in the lightweight construction industry. This is due to the significant advantages of CFS. The optimization of these CFS elements will allow the construction of economical…
The objective of this work is to study the effects of contact parameters on the cracking parameters of a specimen and a pad assembly. These parameters have been studied and evaluated by the finite element method analysis in two dimensions…
This work describes a two-dimensional numerical model that allows detecting the appearance of cracks and calculating their propagation in elements made of laminated bamboo, under tension and shear. This composite material has long parallel…
This paper presents a numerical approach for the analysis of hydrodynamic radial journal bearings. The effect of shaft and housing elastic deformation on pressure distribution within oil film is investigated. An iterative algorithm that…
Reinforced concrete structures may need repair in order to ensure the designed durability. Such necessity vary in cause and effect, but the structural diagnosis serves as the basis for adopting intervention measures. The assessment of the…
