Tip: use quotes for an exact phrase, e.g. "teacher education"
The aim of this study is to deal with the simulation of intralaminar fatigue damage in unidirectional composite under multi-axial and variable amplitude loadings. The variable amplitude and multi-axial loading is accounted for by using the…
The stability of the landfill is an environmental issue. The collapse of the landfill causes environmental pollution and influences human life. In the present study, the crack on the cover of the landfill was simulated. Rankine’s theory…
This study investigates the effects of low concentration (0.1-0.4 wt.%) nano-boron carbide (B4C) reinforcement on the mechanical, thermal and fracture properties of epoxy nanocomposites. The nanocomposites were prepared via solution…
This study has used the strain energy density (SED) approach to evaluate the stress intensity factor (SIF) of cracked cruciform welded joints in Hardox 450 steel. A microstructural analysis was made of Hardox 450 steel which is composed of…
The material with anisotropic properties are becoming widely essential due to the ease to manipulate their mechanical properties in order to obtain a particular quality, insure safety or a specific behavior. Those kind of materials are…
This paper presents numerical models of a 3D printed plastic joint applicable to the connection of wooden structures. The research presented provides a comparison of two alternative solutions for the geometry of the joint and results from…
In this work, an experimental and numerical program was designed to evaluate the role of compressive strength, Fc, and area of reinforcing steel, As, on the flexural behavior of functionally graded reinforced concrete beams. Eighteen…
The dynamic experimental and numerical analysis of cracked beams has been studied with the aim of quantifying the influence of depth crack on the dynamic response of steel beams. Artificial Neural Method ANN has been used where a numerical…
The modeling of the welding is desirable to guess the deformation of the components during manufacture, the position and the magnitude of maximum residual stresses and to envisage metallurgical effects in specific zones. The welding are…
Over the last two decades, piezoelectric actuators have emerged as a promising solution for structural repair. In this work, initially the stress intensity factor (SIF) estimation using the finite element (FE) approach at crack tips in…
The present work investigates the compressive mechanical response of three lattice structures manufactured via VAT photopolymerization. A bio-inspired architecture, derived from the observation of Euplectella aspergillum, was compared with…
This work analyses the results of a simple forming process of an AA6060 aluminium alloy sheet in order to validate the development of a simulation model based on the finite element method (FEM). This work represents the starting point of a…
The work is devoted to the study of the Zr-1Nb alloy in coarse-grained and ultrafine-grained states under laser-induced shock-wave loading. This material is of interest due to the application for the manufacture of shells for fuel elements…
The main objective of the work is to study the fracture behavior of AA6061-graphite material using both experimental technique and finite element simulation by considering helicopter rotor blade as a case study. From the case study, it has…
Fatigue takes a place more and more important in the design of structures, it remains a key point in the mechanical dimensioning of structures. The Friction Stir Welding (FSW) process is regarded today as the most promising alternative to…
To design and evaluate the analytical crack propagation of a specimen under dynamic load, measurement of dynamic fracture parameters is necessary. However, analytical methods have significant complexity, and experimental methods are also…
This research present a novel investigation, which focuses on the numerical exploration of steel columns having a double curvature, built with both hollow square and circular cross-sections. A finite element model was initially created…
The paper presents the results of computer simulation of a hybrid removable complete dentures (RCD) of a maxilla and analysis of its stress–strain states (SSSs) under typical operational loads. For improving their strength and stiffness…
Ultrasonic fatigue at an operating frequency of 20 kHz was conducted on thermally treated clay bricks at 500, 750, and 1000 °C with a holding time of 5 h, using a three-point bending setup to assess their fatigue endurance. A Vickers…
An original simplified constitutive model is proposed to simulate the effects of ballistic impacts on blocks of synthetic muscle simulant based on mineral oil and styrene ethylene-butylene styrene polymers (SEBS) as a convenient substitute…
The good management of drinking water begins with a supply network, with a low rate of leakage. Currently, the pipes used in the water transport system are mainly made of polymeric materials, such as HDPE. The corrosion degradation of this…
This paper presents an experimental and numerical characterization, typical for adhesive aerospace applications. The task is carrying two steps. The first consists on the analysis of a single lap joint produced by a carbon fiber fabric…
Cracks in clayey soil cause a reduction in the seismic loading capacity which can lead to structural failures. Seismic acceleration is the primary cause of crack propagation and damage to the earth's structure. This study investigated the…
Steel-concrete joints are often made by welded shear studs. However, this connection reduces the fatigue strength, especially in situations where locally concentrated loads occur with a large number of load cycles e.g. in bridge decks. In…
In this study, a new approach, for identification and characterization of straight cracks in plates-like structures, is presented. The finite element method using a commercial software (Abaqus)is coupled with successful history-based…
In this paper, the initial and maximum load was studied using the Finite Element Modeling (FEM) analysis during impact testing (CVN) of pipeline X70 steel. The Gurson-Tvergaard-Needleman (GTN) constitutive model has been used to simulate…
Nowadays the demand for high strength steels is increasing. In order to design and develop high performance products, it is essential to understand the fatigue behavior of these materials. When considering welded components, the fatigue…
Through this study, a numerical simulation based on 3D in order to investigate the effect of Crack-front shape on the stress intensity factor and fatigue crack growth behavior of center cracked aluminum plate repaired asymmetrically with a…
Belgrade fair hall 1 is well known for its dome, which is still the world largest self-supported construction made of pre-stressed concrete, with its diameter of 106 m. In this paper the Finite Element Method (FEM) was performed to analyze…
Hydraulic hammers have been extensively applied to horizontal directional well drilling in hard rock formations. However, the service life of a hydraulic hammer is still unsatisfactory due to the heavy wear or abrasion of the horizontal…
T joint is a widely used welding form. The welding deformation and residual stress produced during the welding process will affect the integrity and reliability of the structure. In this study, S355 low alloy steel was used as test…
This study examines the fracture toughness of Al6061 alloy-based hybrid composites reinforced with silicon carbide particles and cenosphere microspheres. Aluminum alloy Al6061 is widely utilized in structural applications due to its…
The mechanical response and the failure mode of thin metal foils under tensile load has been analyzed supplementing the usual test records with full-field measurements performed by three-dimensional digital image correlation (3D DIC)…
The use of miniaturized specimen testing methods is a promising way to solve the problem of limited materials in RPV monitoring programs. The use of miniature specimens allows the evaluation of fracture toughness from other specimen…
Three key qualities should define the structures used in the aviation industry: they should be light, rigid, and strong. These goals can be met by selecting lightweight, high-performance materials like titanium alloy or composites, but…
In the present work the temperature profile variations generated in rectangular specimens built using the Fused Deposition Modeling (FDM) process, at different printing speeds and orientations, were investigated. The temperature recordings…
In fracture mechanics (domain of cracked environments), it is concerned to forecast the behavior of the structures until their ruin. Friction Stir Welding (FSW) is a new process for solid-state joining, it can weld high strength aluminum…
Deep drawing of sheet metal is a crucial industrial process due to its high productivity and low cost per unit produced. Stainless steels are ideal for this process, given their high deformability compared to other steels. Despite its…
This research is a numerical study of the effect of the constrained groove pressing (CGP) process and its impact on a thermoplastic polymer (polyamide PA 66). A simulation is performed using a finite element tool. The effect of the process…
Defects of concrete piles can occur at any point during the construction of piles. Most common types of pile integrity issues are; presence of voids, inconsistency in concrete mix, entrapped groundwater or slurry, and geometric…
This paper deals with the influence of interference fit coupling on the fatigue strength of holed plates. The effect was investigated both experimentally and numerically. Axial fatigue tests have been carried out on holed specimens made of…
Research on determining the lifetime of an expansion bellows designed to compensate the difference in expansion between the shell and the tubes in a fixed tube sheet heat exchanger has never ceased because of its Importance in a heat…
The use of composite materials allows to have a great flexibility in terms of mechanical and physical characteristics. One of the most used composite structure in naval field, is the sandwich, which is composed by a stacking sequence of…
The simulation of the fatigue damage of laminated composites under multi-axial and variable amplitude loadings has to deal with several new challenges and several methods of damage modelling. In this paper we present how to account for the…
