Tip: use quotes for an exact phrase, e.g. "teacher education"
Hybrid continuous fiber–reinforced composites produced by fused deposition modeling (FDM) offer a promising solution for lightweight load-bearing structures. However, their mechanical performance is strongly governed by internal…
Fiber-reinforced polymer (FRP) is the most promising technique in the present era to bring sustainability, reliability, and pseudo ductility to concrete structures due to its superior properties. Thermoplastic and thermoset polymers are…
The paper presents an experimental investigation of the flexural behaviour of reinforced concrete (RC) beam elements strengthened externally with stainless steel wire mesh (SSWM). SSWM has the potential to be an alternative composite…
This research addresses environmental concerns by exploring environmentally friendly composite materials as substitutes for non-biodegradable synthetic fibers. The study proposes the development of polymer matrix composites reinforced with…
New biomedical supportive and lightweight structures require the creation of sustainable polymer composites of high strength and wear resistance. This research explores the use of alkali-treated pineapple leaf fiber (PALF) reinforced epoxy…
Adopting novel sandwich structures with FRP (Fibre Reinforced Polymer) skins and a metallic lattice core, both of which have high specific strength and stiffness, is one way to achieve better mechanical performance while remaining…
The aim of this study was to investigate the effect of thickness of energy director (EDs) and ultrasonic welding (USW) process parameters on structure formation and interlaminar shear strength (LSS) values of lap-joints of composite…
In this study, the relationships between processing, structure and properties of self-reinforced ultra-high molecular weight polyethylene (UHMWPE) composites fabricated via thermal pressing are investigated. By systematically varying…
Glass Fiber Reinforced Polymer (GFRP) I-sections offer a promising alternative to traditional steel reinforcement due to their reduced weight and maintenance requirements. This study aims to optimize the design of GFRP-reinforced composite…
The widespread use of carbon fibre-reinforced polymer (CFRP) composites in sectors such as aerospace and aviation calls for the adoption of sustainable recycling protocols. This research evaluates the mechanical and tomographic…
Glass Fiber Reinforced Polymer (GFRP) is a promising alternative to steel due to its high strength, lightweight properties, corrosion resistance, and low maintenance requirements. This study examines the effect of internal GFRP I-sections…
There are a few kinds of research about box section Reinforced Concrete (RC) beams under the effect of combined shear and torsional stresses. In the present research, the concept of adding external strengthening, in the transverse…
This study presents the first investigation into the use of glass fiber reinforced polymer GFRP to strengthen steel beams with web openings. Based on previous research about the strengthening of steel beams with web perforation using…
Adding short carbon fiber reinforcement to thermoplastic matrices can improve the mechanical performance of additively manufactured polymer-based composites. This work examines the flexural behavior of Fused Deposition Modeling…
In this research, the finite element method is used to develop a numerical model to analyse the effect of the external strengthening of reinforced concrete beams by using carbon Fiber Reinforced Polymer (CFRP) sheets. A finite element…
Advanced polymer matrix composites are gaining the market in their way due to their exceptional specific stiffness, specific strength, fatigue, and corrosion resistance in the field of Auto-Tech, Aero-Tech, Biotech, etc. However, the lack…
This research examines the performance of reinforced lightweight concrete beams subjected to several degrees of damage (50%, 60%, 70%, and 100%). It can use a sheet made of Carbon Fiber Reinforced Polymer (CFRP) to reinforce. The Full…
The flexural behavior of lightweight concrete two-way slabs is investigated in this work, with a focus on the strengthening or repairing method of externally attaching carbon fiber-reinforced polymer (CFRP) sheets. Five 1000 mm by 1000 mm…
This study investigates spall damage and failure in Carbon Fiber-Reinforced Polymer (CFRP) pressure vessels under explosive internal loading using stimulated electric discharge. Analytical modeling, validation with published experimental…
This study investigates jute fibre reinforced epoxy composites fabricated using a controlled vacuum bag moulding process, with emphasis on establishing reliable structure property relationships relevant to sustainable engineering…
The rapid development of inhomogeneous and anisotropic materials like carbon fiber reinforced polymers (CFRP) with epoxy matrices necessitates a multidisciplinary approach for safe use. This approach should integrate computational modeling…
The focus of this research was to investigate the effects of carbon nanofiber (CNF) reinforcement on the mechanical performance, interfacial characteristics, and abrasive wear behavior of short glass fiber/polyphenylene sulfide (GF/PPS)…
The machinability of polymer matrix composites with fibers strongly depends on the type of fiber and dosage in question, having a high influence on the selection of tools and cutting parameters. The cutting temperature depends of rotation…
A three-dimensional (3D) general upper-bound limit analysis procedure for the determination of the collapse load of out-of-plane loaded masonry walls with Fiber Reinforced Polymer (FRP) reinforcement strips is presented. The geometry of a…
A substantial amount of work was carried out on the use of fiber-reinforced polymer (FRP) in reinforcing concrete structural elements, which demonstrated considerable inelasticity or deformity through monotonous and fatigue loads. Even so…
Concrete corbels are short cantilever constructions that may lose their strength over time because of loads that happen over and over again. As an external bonding method for reinforcement, carbon fiber-reinforced polymer (CFRP) strips are…
A quasi-static approach for an interface damage model, incorporating Rayleigh damping for viscoelastic carbon fiber reinforced polymer composites, is introduced. The interface traction-relative displacement behavior is modeled using a thin…
The study focuses on examining the impact of internal manufacturing defects (voids and wrinkles) on the mechanical behavior of structural carbon fiber reinforced polymers (CFRP) under shear loading. Specimens of VKU/VSE1212 material with a…
Modern technological capabilities make it possible to produce 3D spatially-reinforced for polymer composite materials. The tasks of experimental research and analysis of the deformation process of new composite materials for aviation…
The near surface mounted (NSM) method of inserting fiber reinforced polymer (FRP) elements (rods or lamina) into notches has been shown to be a good way for restoring reinforced concrete (RC) elements. The knowledge about the use of…
The use of bonded externally polymer reinforced fiber (FRP) Laminates has been introduced as an effective approach in rehabilitating (RC) structures due to their high strength, corrosion resistance, reduced weight, and ease of use. This…
The article presents the results of computational and experimental studies of the strength and damageability of a connecting composite part in a metal-composite joint of isogrid and anisogrid structures made of polymer composite material…
The aim of this work is to evaluate the failure analysis of jute fabric reinforced composite using statistical technique for marine applications. A fracture mechanics approach is proposed to determine the failure load and fracture…
This paper aims to analyze the multi-effects of the glass fiber reinforced polymer (GFRP) composite patch to repair the inclined cracked 2420-T3 aluminum plate. Three-dimensional finite element method (FEM) was used to study the effect of…
The present investigation deals with the characterization of tensile behavior of various Fiber Reinforced Polymer composites under Thermo-Mechanical loading. Five different types of Uni-Directional (UD) composites of Carbon, Glass…
The objective of this work was to characterize the full-field flexural behavior of composite sandwich beams. Finite element analysis was used to estimate the behavior of sandwich beams under three- and four-point-bending tests and were…
Composite systems are widely used in many engineering applications for new structures and strengthening of existing ones. Within the structural rehabilitation of civil constructions, the plating technique of beams with Fiber Reinforced…
The good management of drinking water begins with a supply network, with a low rate of leakage. Currently, the pipes used in the water transport system are mainly made of polymeric materials, such as HDPE. The corrosion degradation of this…
In this paper experimental results of investigation on reinforced concrete (RC) beams strengthened with the near surface method (NSM) are analyzed considering the response under bending tests on two beams. One of the RC beams was damaged…
The research focuses on examining the impact of technological defects, specifically "dry-spot" and "wrinkles," on the mechanical behavior and buckling resistance of structural composites. The investigation of the buckling phenomenon was…
This study experimentally investigates the tensile and bond performance of novel GFRP–SSWM hybrid wraps developed using two epoxy adhesives - Sikadur 30 LP and Sikadur 330. A total of 42 coupon specimens for tensile testing and 48 dumbbell…
The aim of this work is to investigate the mechanical behavior of sandwich structures when subjected to edgewise and flatwise compression loadings, using 2D Digital Image Correlation (DIC). These structures are made of Glass Fiber…
