Tip: use quotes for an exact phrase, e.g. "teacher education"
In this work, a micromechanical model is used in order to predict the failure surface of cement concrete subject to multi-axial compression. In the adopted model, the concrete material is schematised as a composite with the following…
The technology of energy piles for heat storage involves turning the concrete piles buried beneath the ground into a part of the ground-source heat pump system and burying the heat-transfer tubes in the foundation piles, which are regarded…
The reuse of concrete waste as a secondary aggregate could be an efficient solution for sustainable development and long-term environmental protection. However, the variable quality of waste concrete, especially with various compressive…
Cement and concrete composites are inherently brittle and exhibit very less tensile/flexural strength capacity as compared to their compressive strength. Use of thoroughly dispersed carbon nanotubes in the concrete matrix is one of the…
Concrete is a porous material containing aggregate of different sizes, hardened cement matrix with air pores, microcracks and water. Concrete internal structure is different from that of other engineering materials. Furthermore concrete is…
The dynamic mechanical property of concrete is very complex and is one of the hot spots in academic research. In this paper, concrete is considered as a three-phase composite composed of cement mortar matrix, coarse aggregate and…
In recent decades, researchers have tried to use waste materials as a partial or complete replacement of the gravel ingredients of concrete to reduce environmental impact. One of these materials is electronic waste. The problem of this…
This paper experimentally investigates the effect of steel and glass fibers on the engineering properties of concrete. To achieve this, 0.3%, 0.6%, and 0.9% by volume fraction of steel and glass fibers are added in concrete mixtures with…
Fly ash has been used more and more often to take the place of cement as the admixture of concrete in the construction of concrete buildings. However, with the increase of the carbon dioxide (CO2) concentration in the atmosphere…
There are various benefits to ultra-high-performance fiber-reinforced concrete (UHPFRC). However, using a lot of cement in this type of concrete has a severe disadvantage since it causes pollution and several environmental concerns.…
Ultra-high performance concrete (UHPC), a kind of composite material characterized by ultra high strength, high toughness and high durability. It has a wide application prospect in engineering practice. But there are some defects in…
The valorization of local by-products in the manufacture of a new range of sand concrete and the improvement of their properties, will lead to seek an arrangement between performance and cost in order to achieve a resistant material. Waste…
The construction material quality is required to be improved in order to enhancing structure stability, optimizing construction cost and quality. The kaolin and bentonite have been mixed in equal quantity and treated by heat for 1 hour…
In recent years, the construction industry has witnessed significant advancements in concrete technology, particularly with the integration of 3D printing in cement-based materials. While this innovation offers promising opportunities for…
Concrete is one of the most widely used materials in the world. Still, its production processes, energy consumption, and high use of raw materials make it one of the most environmentally harmful materials. This study aims to enhance the…
Light-weight aggregate and trapped air additions (TAD) affect concrete performance and lead to the production of light-weight concrete (LWC). In this research, fourteen mixes were designed to study the effects of TAD type and content and…
Concretes with water to cement (or binder) ratios of 0.50. 0.40, 0.30 and 0.20 were prepared and long-term mechanical properties were measured. Porous light-weight aggregates (LWA) in dosages of 10 % and 20 % were used for self-curing…
This paper investigates the possibility of combining steel fibers with different weight percentages along with their functions in increasing compressive strength, indirect tensile strength and bending strength. In this study, two types of…
Concrete completely submerged in sulfate solutions has been used as the primary study subject for the durability of concrete subjected to sulfates. On the other hand, empirical data from the field indicates that concrete exposed to…
In this paper, fly ash, ladle furnace slag and limestone filler were utilized in concrete used as material for additive manufacturing (3D printing). Fly ash and ladle furnace slag were used as a replacement of cement (30% wt.) and…
The interest of using combined sand of equal percentage of silica and limestone becomes evident in the formulation of compacted concrete in several previous works around the world, due to the formidable percentage of fines that improves…
The corrosion behavior of 304L stainless steel rebars in an alkaline solution simulating new concrete subjected to acid rain attack and a mildly to slightly acidic solution simulating corroded cover concrete that exposed the reinforcement…
Bendable concrete is also defined as engineered cementitious composites because of its great ductility and tight fracture width limitation. ECC mixtures by adding additional Portland cement, silica sand and fly ash, fiber types…
Construction industry consumes a large amount of natural resources and energy and produces high amount of CO2 emissions and waste materials. For more sustainable construction industry, various waste materials are used as natural aggregates…
This investigation means to predict and modeling the fresh and hardened concrete behavior containing fine aggregates from concrete and brick wastes, for different recycled aggregates substitution rates. To succeed this, the design of…
This article presents the results of a comparative experimental study on the influence of date palm fibers to replace polypropylene fibers used as reinforcement in self-compacting concrete (SCC). Indeed, the use of polypropylene fibers…
The fracture behavior of quasi-brittle materials such as concrete is characterized by the presence of a fracture process zone (FPZ) that precedes the main crack. Within this zone, various mechanisms, including the formation of microcracks…
Magnetized water (MW) is one of the most effective and economical ways to improve the properties of self-compacting concrete (SCC). Therefore, the aim of this study is to improve the fresh, mechanical, and microstructural properties of SCC…
Simulating the concrete fracture unlike other elastic and brittle materials quite different due to its quasibrittleness. The present research focussed on assess softening behavior by varying different fractions of aggregates and cement…
Le béton à hautes performances (BHP) est un béton innovant largement utilisé dans la construction moderne. De nouvelles techniques de formulation et de conception du HPC ont permis d'obtenir des performances mécaniques et une durabilité…
In order to study the effect of polypropylene fibers on the durability of cementitious composites, several experimental tests have been carried out in the laboratory. The composite was tested with different volume fractions of…
The present study concerns the experimental investigation of foamed concretes with 1600 kg/m3 density that incorporate biochar additions in the mix. A series of small notched beams are prepared to determine the fracture energy in CMOD…
The main goal of this work is the formulation of a self-compacting repair mortars (SCRMs) containing limestone dust (LD) and natural pozzolan (NP). For this purpose, a control mortar (SCRM-0) and two different mortars types, one with 10%…
