Tip: use quotes for an exact phrase, e.g. "teacher education"
The scatter degree of the fatigue samples is reduced when the nodal force based structural method is used for steel welded joints, while it is still high for aluminum alloy welded joints. Statistical method and rough set theory is used to…
Automotive industry and mechanical engineering strive to drastically reduce the carbon footprint of their products. This becomes increasingly important as aluminum usage grows for lightweight, efficient components. Nevertheless, cast…
The crack growth behavior of the aluminum alloy 6061 T651 was investigated using cruciform specimens with a measurement area of 120 x 120 x 2 mm3 with two center crack configurations of the starting notch parallel to one of the loading…
The main objective is to model the behavior of 7075 aluminum alloy and built an experimental database to identify the model parameters. The first part of the paper presents an experimental database on 7075 aluminum alloy. Thus, uniaxial…
Fully automatic fatigue crack growth simulation system is developed using S-version FEM (SFEM). This system is extended to fracture in heterogeneous material. In the heterogeneous material, crack tip stress field becomes mixed mode…
This paper discusses the relationship between the stress response and the microstructure under tension-torsion multiaxial proportional and nonproportional loadings. Firstly, this paper discusses the material dependency of additional…
Fatigue surface crack growth is studied through experiments and computations for aluminum alloys D16T and B95AT (analogue of 2024 and 7075 aluminum). Subjects for studies are cylindrical hollow specimens with external semi-elliptical…
During manufacturing of parts from metals and alloys through forming and subsequent thermal and mechanical treatments the materials are often subjected to complex loading. In such cases materials significantly change their structure, which…
Sandwich panels with polymer composite and light core composites are widely used in aircraft and spacecraft, vessels, trains, submarines, and cars. Due to their high strength to weight ratio, high stability, and high corrosion resistance…
Utilizing molecular dynamics (MD) integration model we have investigated some of the relevant physical processes caused by different loading paths at the atomic level in Cu and Al monocrystal specimen. Interactions among the atoms in the…
The presence of a geometric discontinuity such as a crack or a notch can cause the failure of a structure during its use. Under various mechanical or thermal stresses, a high concentration of stresses can take place at the level of these…
Due to the abundance of engineering components subjected to complex multiaxial loading histories, being able to accurately estimate fatigue damage under multiaxial stress states is a fundamental step in many fatigue life analyses. In this…
In recent years, mechanical property of many SMA has improved in order to introduce these alloys in specific field of industry. Main examples of these alloys are the NiTi, Cu-Zn-Al and Cu-Al-Ni which are used in many fields of engineering…
In the field of composite materials, extensive research has been undertaken on aluminum-graphite composites. However, a research gap has been identified regarding the specific influence of nano-sized graphite particles on their fracture…
This article presents the bending fatigue behavior and the scatter-band analysis of aluminum alloys under beneficial conditions of nano-clay-particles and heat-treating, compared to detrimental conditions of the mechanical stress and the…
A356-T6 cast aluminum alloy is a light weight structural material, but fatigue crack initiates and propagates from a casting defect leading to final fracture. Thus it is important to eliminate casting defects. In this study, friction stir…
Three-point bending fatigue test of 5083 and 5A06 aluminum alloy T-welded joints is carried out, and the fatigue life of the specimens with different influencing factors are obtained. Finite element model of the T-welded joint is…
The specimen fractures appearances are analyzed to investigate the effects of mean tensile stress on the fatigue crack initiation and early propagation plane orientation under axial-torsion fatigue loading for 2A12T4 aluminum alloy. The…
In this paper the fatigue crack growth tests were carried out on surface-crack tension (SCT) specimens, made of 7050 and Ti6Al4V alloys, with initial semi-elliptical surface cracks. Pure Mode I conditions were realized on SCT specimens…
2024 aluminum alloy is a common aeronautic material. During operations, construction elements made of aluminum alloys undertake complex cyclic loadings. Therefore, it is important to estimate the influence of these loadings on the…
Aluminum alloys having good mechanical properties are Al-Zn- Mg alloys (7xxx) and Al-Cu-Li alloys (Weldalite®). These alloys may be subjected to stress corrosion cracking. In order to overcome this problem the Al 7050 alloy has been…
In this paper, the finite element (FE) method was used to investigate the axial compressive behaviors of circular and square concrete filled aluminum tubes (CFAT). Firstly, the simulational results were compared with the experimental…
In recent times, the use of aluminum alloy-based Hybrid Metal Matrix Composites (HMMCs) is being increased in aerospace and automotive applications. HMMCs compensate for the low desirable properties of each filler used. However, the…
The present study develops a knowledge-based machine learning framework for estimating the fatigue life of Al alloy using a combination of data-driven models and an empirical equation. Three different ML models were developed and tested…
In this paper, a previously developed modification of the Sainz model of multiaxial fatigue is reduced to an invariant form. Model constants were determined for different sets of setup experiments. It was supposed to introduce an…
The current investigation deals with the forming process of Perforated Sheet Metal (PSM) process. The goal of the work is to determine by experimental and numerical methods the Forming Limit Diagrams (FLDs) of an Al-Mg-Si aluminum alloy.…
For industrial in-series castings, the presence of casting defects, like porosity, geometrically complex intermetallic precipitates and the occurrence of eutectic silicon of varying morphologies, is well known but hard to prevent due to…
This paper is devoted to the numerical and experimental study of ductile fracture in bulk metal forming of the 2017A-T4 aluminum alloy. From an experimental standpoint, the ductile fracture of the 2017A-T4 aluminum alloy is investigated…
The paper studies the processes of deformation and fracture in nanocomposites. The study was curry out by the method of mathematical modeling. The behavior of the nanosystem was described by the molecular dynamics apparatus. A modified…
Although diffusional flow creep is often considered out of practical engineering applications, the need for a model capable to account for the resulting action of both diffusional and dislocation type creep is justified by the increasing…
The influence of the non-proportional loadings on the fatigue life depends on the material ductility. Ductile materials react with a shortening of lifetime compared to proportional loading conditions. For a semiductile material there is…
In this study, to investigate and understand the nature of fracture behavior properly under in-plane mixed mode (Mode-I/II) loading, three-dimensional fracture analyses and experiments of compact tension shear (CTS) specimen are performed…
Impact resistance and energy absorbing capability are of great interest in the design of composite sandwich structures. This paper experimentally studies damage, failure and energy absorption properties of foam core sandwich panels with…
Friction stir welding (FSW) is an extremely complex process because it depends on the intrinsic and extrinsic factors of the material under consideration. The purpose of the present work is to formulate a set of recommendations concerning…
Through this study, a numerical simulation based on 3D in order to investigate the effect of Crack-front shape on the stress intensity factor and fatigue crack growth behavior of center cracked aluminum plate repaired asymmetrically with a…
Aluminum alloys are widely used in the automobile industry because of their excellent mechanical strength, low weight, and remarkable resistance to corrosion and wear. The purpose of this study is to investigate how the microstructure…
A new fatigue testing device has been developed to test specimens under biaxial loading at 20 kHz. A flat smooth specimen with a disc geometry is placed on a torus frame and cyclically loaded at the center of its upper face. Disc bending…
During a ferry flight, in a standard operation condition and at cruising level, a military cargo experienced a double hydraulic system failure due to a structural damage of the dual booster actuator. The booster actuator is the main…
This paper aims to analyze the multi-effects of the glass fiber reinforced polymer (GFRP) composite patch to repair the inclined cracked 2420-T3 aluminum plate. Three-dimensional finite element method (FEM) was used to study the effect of…
The paper presents development of crack paths in aluminium alloy 2024. Fatigue tests were carried out for specimens with rectangular cross-section. The specimens were put to bending at controlled energy parameter amplitude and bending…
Fatigue cracking of longerons manufactured from Al-alloy AVT-1 for helicopter in-service rotorblades was considered and crack growth period and equivalent of tensile stress for different blade sections were estimated. Complicated case of…
Single Point Incremental Forming was conducted on Aluminum1100 and Brass CuZn37 to form a hyperbolic truncated pyramid with varying wall angles until the fracture occurs. The formability of the specimens in terms of fracture depth and…
The publication presents a cruciform specimen for the determination of cyclic crack growth data under biaxial loading. The design of the specimen with slotted loading arms allows good decoupling between the two loading directions. For…
A Light Utility Helicopter (LUH), in the course of a training flight, leaving the ground during the taxi to take off, went into an uncontrolled rolling to the right; consequently the helicopter gradually laid down on the right side. The…
In this paper, the effect of corrosion on the performance of the bonded composite patch repair in aluminum alloy A5083 marine structure was investigated using three dimensional finite element methods. To this end, two patches made in…
This work consists of an experimental study on the ageing response and resulting properties of AA7050 plate material. New heat treatments are investigated for achieving a peak-aged temper, as a T6 temper may be said to be, that achieves…
As it is imperative to control the materials development processes well, in parallel, it will be necessary to constantly adapt very efficient assembly methods. Friction stir welding makes it much easier for us to fusion the aluminum alloys…
The fracture properties of thin aluminum inclusions embedded in anisotropic paperboardcomposites, of interest for food and beverage packaging industry, can be determined by performing tensile testson non-conventional heterogeneous…
The fatigue life prediction model of self-piecing riveting components of aluminum alloy is established and the effects of roughness and residual stress on fatigue life of self-piercing riveting components is analyzed by the model. Finite…
Vast number of theoretical and experimental works has been devoted to the study of discontinuous plastic deformation (the Portevin-Le Chatelier effect), which manifests itself for most widely used alloys in certain ranges of both…
