Tip: use quotes for an exact phrase, e.g. "teacher education"
In the present article, a review of the complete characterization in different aggressive media of a Ti-6Al-4V titanium alloy, performed by the Structural Mechanics Laboratory of the University of Bergamo, is presented. The light alloy has…
This paper presents both mechanical and structural aspects of micro-cracking of CuNi2Si copper alloy in CNCS grade revealed during the static tensile test in the temperature range between 20ºC and 800ºC. The purpose of this paper is to…
Biodegradable stents are attracting the attention of many researchers in biomedical and materials research fields since they can absolve their specific function for the expected period of time and then gradually disappear. This feature…
The aluminum alloy are extensively used in several industrial applications. Stir casting is one of the most frequently accepted methods. In the present investigation, how the microstructure, mechanical and wear mechanics of A357 alloy were…
The work concerns the application of the acoustic emission (AE) method in testing the mechanical properties of continuously cast industrial tin bronze CuSn6P, which reveals tendencies to instable plastic flow connected particularly with…
A Light Utility Helicopter (LUH), in the course of a training flight, leaving the ground during the taxi to take off, went into an uncontrolled rolling to the right; consequently the helicopter gradually laid down on the right side. The…
Titanium alloy (Ti-6Al-4V) having a bimodal “harmonic structure”, which consists of coarsegrained structure surrounded by a network structure of fine grains, was fabricated by mechanical milling (MM) and spark plasma sintering (SPS) to…
The scatter degree of the fatigue samples is reduced when the nodal force based structural method is used for steel welded joints, while it is still high for aluminum alloy welded joints. Statistical method and rough set theory is used to…
The infrared thermography is an attractive tool for studying the fatigue behavior of materials. Based on two theoretical models of fatigue damage indicators, this work studied the fatigue properties of the virgin Ti- 6Al-4V alloy.…
The results of the investigation of both mechanical and acoustic emission (AE) behaviors of Mg4Li5Al alloy subjected to compression and tensile tests at room temperature are compared with the test results obtained using the same alloy and…
In the current studies an investigations were made to know the effect of 63 micron sized B4C particles addition on the mechanical and wear behavior of aerospace alloy Al2618 metal composites. Al2618 alloy with different weight percentages…
The paper presents the results of experimental test of the fatigue of aluminium alloy type AlZn6Mg0,8Zr exposed to various low temperature thermomechanical treatment. Basquin’s characteristics of fatigue have been determined in mechanical…
In recent years, mechanical property of many SMA has improved in order to introduce these alloys in specific field of industry. Main examples of these alloys are the NiTi, Cu-Zn-Al and Cu-Al-Ni which are used in many fields of engineering…
The aim of the present paper is the investigation of temporal instabilities and spatial localization due to the Lüders behavior, the Portevin–Le Chatelier effect and the shoulder or necking effect during uniaxial tension tests of…
The main objective is to model the behavior of 7075 aluminum alloy and built an experimental database to identify the model parameters. The first part of the paper presents an experimental database on 7075 aluminum alloy. Thus, uniaxial…
NiTi shape memory alloys (SMAs) are increasingly used in many engineering and medical applications, because they combine special functional properties, such as shape memory effect and pseudoelasticity, with good mechanical strength and…
The crack growth behavior of the aluminum alloy 6061 T651 was investigated using cruciform specimens with a measurement area of 120 x 120 x 2 mm3 with two center crack configurations of the starting notch parallel to one of the loading…
Fully automatic fatigue crack growth simulation system is developed using S-version FEM (SFEM). This system is extended to fracture in heterogeneous material. In the heterogeneous material, crack tip stress field becomes mixed mode…
The influence of the joint line remnant (JLR) on tensile and fatigue fracture behaviour has been investigated in a friction stir welded Al-Mg-Sc alloy. JLR is one of the microstructural features formed in friction stir welds depending on…
This study, concerns the improvement of the hardness and resistance to wear of the Ti-6Al-4V alloy surface by means of thermochemical treatment, for obtaining coatings on the Ti-6Al-4V alloy gives performance of resistance to wear…
This paper examines the influence of controlled heat treatments on the mechanical behaviour of Ti-6Al-4V (Grade 5 Titanium alloy) to improve its performance in structural and high performance applications. Ti-6Al-4V is widely used in…
The purpose of this study is to investigate the influence of hybrid nanoparticle reinforcement with Al2O3 and ZrO2 on the mechanical and wear parameters of Al6061 alloy-based Nano composites. MMC’s (Metal Matrix Composite) specimens were…
The present work focuses on the Tribological properties and corrosion behavior evaluation of sintered CoCrMo alloy. The CoCrMo alloy was elaborated by Powder metallurgy process at various sintering temperatures (1200°C, 1250°C and 1300°C).…
A detailed investigation was conducted into the fracture mechanisms of cylindrical specimens made of a polycrystalline heat-resistant nickel-based alloy XH73MBTU-VD (EI698-VD), under uniaxial tension in the temperature range of 25–700°C.…
Composite materials application areas have gradually grown, allowing them to reach and conquer new markets from consumer products to specialized niche applications, advanced composite materials make up a significant portion of the…
The objective of the present paper is to investigate the stress-controlled low-cycle fatigue behavior of piston aluminum-silicon (AlSi) alloy reinforced with nano-clay particles and T6 heat-treatment. The piston aluminum-silicon alloy…
The work is devoted to the study of the Zr-1Nb alloy in coarse-grained and ultrafine-grained states under laser-induced shock-wave loading. This material is of interest due to the application for the manufacture of shells for fuel elements…
High Entropy Alloys (HEAs) is a unique class of materials that combine particular properties in a large-scale of temperatures, able to guarantee new unexplored materials and alloys with several potentially engineering applications (i.e.…
The satellite LARES 2 is designed to test dragging of inertial frames, or frame-dragging, predicted by Einstein’s theory of General Relativity, with accuracy of a few parts in a thousand. For this purpose, besides the typical requirements…
Regarding the fatigue behaviour of EN AC-42000 T6 (A 356 T6), which is the most frequently used cast aluminium alloy for automotive safety components, especially under non-proportional constant and variable normal and shear stress…
The aim of the paper was investigation crack initiation and fracture features developed during compression of Fe-based bulk metallic glass (BMG). These Fe-based BMG has received great attention as a new class of structural material due to…
Aluminum alloys are widely used in the automobile industry because of their excellent mechanical strength, low weight, and remarkable resistance to corrosion and wear. The purpose of this study is to investigate how the microstructure…
Magnesium (Mg) alloys are attractive as structural materials due to their light weight and high specific strength. It is well known that Mg alloy has hexagonal close-packed (HCP) structure and only basal slip or twinning can operate during…
The specimen fractures appearances are analyzed to investigate the effects of mean tensile stress on the fatigue crack initiation and early propagation plane orientation under axial-torsion fatigue loading for 2A12T4 aluminum alloy. The…
In the present paper, microstructural and mechanical properties of an innovative AlSi3Mg alloy were studied. Particularly, the effect of the addition of Cr and Mn on tensile strength and impact toughness was evaluated. In fact, the…
While it is well known that fatigue crack growth in metals that display confined slip, such as high strength aluminium alloys, develop crack paths that are responsive to the loading direction and the local microstructural orientation, it…
Aluminium alloy composites are extensively utilised in the aerospace, automobile, and marine industries due to their lightweight structure and high strength-to-density ratio. However, there remains significant potential to further improve…
Shape memory effect (SME) and the relation with corrosion behavior of Cu-Zn-Al Smart Memory Alloys (SMAs) were investigated using different techniques: Scanning Electron Microscopy equipped with an Energy Dispersive System, X-Ray…
Tensile and stress controlled fatigue tests were performed to investigate the influence of forging at a temperature of 400°C at different rates, on the performance of extruded AZ31B magnesium alloy. The obtained microstructural analysis…
A356-T6 cast aluminum alloy is a light weight structural material, but fatigue crack initiates and propagates from a casting defect leading to final fracture. Thus it is important to eliminate casting defects. In this study, friction stir…
Due to the abundance of engineering components subjected to complex multiaxial loading histories, being able to accurately estimate fatigue damage under multiaxial stress states is a fundamental step in many fatigue life analyses. In this…
The paper details the studies carried out on a dual-size particulate composite prepared by stir casting using A 356 aluminum alloy and B4C powders. Three composite compositions, viz., A356 plus 2% B4C (44µm size and 105µm size in 1:1…
A present study reveals the influence of nano Al2O3 and ZrO2 reinforcements on the fracture toughness of Hybrid Metal matrix Composites (HMMCs) made of Al6061 alloy. Composites are synthesized by varying weight fraction of alumina and…
An analytical model is developed to predict fatigue crack propagation rate under mode I loading in 2024 aluminum alloy with FSW HAZ material characteristics. Simulation of the HAZ local properties in parent 2024 AA was performed with…
The present study of Ti6Al4V alloy production via Electron Beam Melting (EBM) represents a cutting-edge research topic impacting different strategic engineering applications. This can be attributed to the widespread use of this alloy and…
The aim of this work is to solve the methodological issues of the experimental study of the nucleation and propagation of deformation bands due to the Portevin-Le Chatelier effect under conditions of complex loading. It is of interest to…
The third generation Al-Li alloy AA2050-T84 is widely used in aircraft applications due to its lightweight and significant mechanical properties. The anisotropic variations of tensile and compression properties of this alloy at various…
This paper deals with the fatigue crack propagation behavior of rolled AZ31B magnesium alloy (grain size: approximately 40 ?m). Fatigue crack propagation tests were performed on single edge notched tension specimens at a stress ratio of R…
The presence of notches and other stress concentrations in turbine blades and other notch hydraulic components is a current problem in engineering. It causes a reduction of endurance limit of material. In that sense, specimens of the ASTM…
In this paper we investigated the influence of consecutive dynamic and gigacycle fatigue loads on the lifetime of aluminum-magnesium alloy AlMg6. Preloading of samples was achieved during dynamic tensile tests in the split-Hopkinson bar…
