Analytical, computational and physical Models

All Items

• Numerical homogenization of piezoelectric textiles with electrospun fibers for energy harvesting

  C. Maruccio, L. De Lorenzis

  pages 49-60

• Numerical implementation of a multiaxial cyclic plasticity model for the Local Strain Method in low cycle fatigue

  C. Madrigal, V. Chaves, A. Navarro

  pages 153-161

• Numerical investigation of an extra-deep drawing process with industrial parameters: formability analysis and process optimization

  Amina Belguebli, Ibrahim Zidane, Adel Hadj Amar, Abdessoufi Benhamou

  45-62

• Numerical investigation of the effect of constrained groove pressing process on the mechanical properties of polyamide PA66

  Mohammed Salah Bennouna, Sadek Kaddour, Benaoumeur Aour, Nadir Damba

  254-266

• Numerical Investigation of the Seismic Behavior of Unanchored Steel Tanks with an emphasis on the Uplift Phenomenon

  Jalal Akbari, Omid Salami, Mohsen Isari

  92-105

• Numerical investigation on strengthening steel beams with web openings using GFRP

  Hamda Guedaoura, Yazid Hadidane, Mohammed J Altaee

  26-53

• Numerical investigation on stress corrosion cracking behavior of dissimilar weld joints in pressurized water reactor plants

  Lingyan Zhao, He Xue, Fuqiang Yang, Yaohong Suo

  pages 410-418

• Numerical Investigation on Stress Intensity Factor and J Integral in Friction Stir Welded Joint through XFEM method

  Imane imane_elmeguenni Elmeguenni, Mohamed Mazari

  54-64

• Numerical model of fracture growth in hydraulic re-fracturing

  Oleg Yurievich Smetannikov, Yuriy Aleksandrovich Kashnikov, Sergey Gennadievich Ashikhmin, Artem Eduardovich Kukhtinskiy

  140-155

• Numerical modeling based on moving mesh method to simulate fast crack propagation

  Francesco Fabbrocino, Marco Francesco Funari, Fabrizio Greco, Paolo Lonetti, Raimondo Luciano

  410-422

• Numerical modeling of bending, buckling, and vibration of functionally graded beams by using a higher-order shear deformation theory

  Nabil Hebbar, Imène Hebbar, Djamel Ouinas, Mohamed Bourada

  230-246

• Numerical modeling of the contact effect on the parameters of cracking in a 2D Fatigue Fretting Model

  Mohammed Bentahar, Habib Benzaama, Mahmoudi Noureddin

  182-194

• Numerical modelling of dynamic ductile fracture propagation in different lab-scale experiments using GTN damage model

  Benoît Paermentier, Dimitri Debruyne, Reza Talemi

  105-112

• Numerical modelling of reinforced concrete beams with fracture-plastic material

  O. Sucharda, J. Brozovsky

  pages 375-382

• Numerical modelling of residual stress redistribution induced by TIG-dressing TIG-dressing numerical modelling

  Paolo Ferro, Filippo Berto, Franco Bonollo, Roberto Montanari

  221-230

• Numerical Simulation Analysis of the Dynamic Mechanical Property of Concrete Based on 3D Meso-mechanical Model

  Fengyan Qin, Jingsong Cheng, Heming Wen, Hongbo Liu

  1-13

• Numerical Simulation Method Study of Rock Fracture Based on Strain Energy Density Theory

  Shuchen Li, Luchen Zhang, Qian Sun, Ma Tengfei

  1-16

• Numerical simulation of a heat generation in a layered material during ultrasonic wave propagation

  Anastasiia Kostina, Oleg Plekhov, Sergey Aizikovich

  332-342

• Numerical simulation of crack propagation behavior of a semi-cylindrical specimen under dynamic loading

  Ghorban Khandouzi, Mohsen Mollashahi, Mojtaba Moosakhani

  29-37

• Numerical simulation of crack propagation in clinch joints

  Petr Lehner, Martin Krejsa, Dominik Gřešica, Jakub Flodr

  13-20

• Numerical simulation of dissimilar metal welding and its verification for determination of residual stresses

  Sz. Szávai, Z. Bezi, C. Ohms

  Pages 36-45

• Numerical simulation of dynamic brittle fracture of pipeline steel subjected to DWTT using XFEM-based cohesive segment technique

  Reza H. Talemi

  Pages 151-159

• Numerical simulation of early-age shrinkage effects on RC member deflections and cracking development

  P. Bernardi, R. Cerioni, E. Michelini, A. Sirico

  15-21

• Numerical simulation of frozen wall formation in water-saturated rock mass by solving the Darcy-Stefan problem

  Mikhail Semin, Lev Levin

  167-176

• Numerical simulation of galvanized rebars pullout

  H.F.S.G. Pereira, V.M.C.F. Cunha, J. Sena-Cruz

  pages 54-66

• Numerical simulation of subsurface defect identification by pulsed thermography and improvement of this technique for noisy data

  Oleg Plekhov, Anastasiya Kostina, Sergey Aizikovich

  667-683

• Numerical simulation of the de-bonding phenomenon of FRCM strengthening systems

  Ernesto Grande, Maura Imbimbo, Sonia Marfia, Elio Sacco

  321-333

• Numerical simulations of tests masonry walls from ceramic block using a detailed finite element model

  V. Salajka, J. Klouda

  Pages 88-99

• Numerical study and pilot evaluation of experimental data measured on specimen loaded by bending and wedge splitting forces

  S. Seitl, R. Diego Liedo

  Pages 100-109

• Numerical study of crack path by MMCG specimen using M integral

  S. El Kabir, R. Moutou Pitti, N. Recho, Y. Lapusta, F. Dubois

  pages 64-73

• Numerical study of eddy current by Finite Element Method for cracks detection in structures

  S. Harzallah, M. Chabaat, K. Chabane

  Pages 282-290

• Numerical study of semi-elliptical cracks in the critical position of pipe elbow

  Bassam Gamal Nasser Muthanna, Omar Bouledroua, Madjid Meriem-Benziane, Mohammed Hadj-Meliani, Guy Pluvinage, Rami Khalid Suleiman

  463-477

• Numerical study of the influence of the parameters of statistical distribution of the structural elements’ ultimate strength on deformable bodies’ fracture processes

  Eugeniia Feklistova, Artur Mugatarov, Valeriy Wildemann

  105-120

• Numerical study of TRIP transformation in 35NCD16 steel-effects of plate orientation and some criteria

  Mounir Gaci, Fedaoui Kamel, Lazhar Baroura, Amar Talhi

  444-460

• Numerical-Experimental characterization of honeycomb sandwich panel and numerical modal analysis of implemented delamination

  AYA BENDADA, Djilali Boutchicha, Adel Chouiter, Mokhtaria Miri

  655-665

• NURBS-based kinematic limit analysis of FRP-reinforced masonry walls with out-of-plane loading

  Andrea Chiozzi, Nicola Grillanda, Gabriele Milani, Antonio Tralli

  9-23

• Object-Oriented Software for Fitness-For-Service Assessment of Cracked Cylinder Based on API RP 579

  Jirapong Kasivitamnuay, Pairod Singhatanadgid

  163-180

• On a kinked crack model to describe the influence of material microstructure on fatigue crack growth

  Andrea Spagnoli, Andrea Carpinteri, Sabrina Vantadori

  Pages 94-101

• On adaptive refinements in discrete probabilistic fracture models

  J. Eliáš

  Pages 1-6

• On fatigue behaviour of two spring steels. Part II: Mathematical models

  D. Angelova, R. Yordanova, T. Lazarova, S. Yankova

  258-264

• On local strength of a spherical vessel with pits distributed along the equator

  Daria Okulova, Liana Almazova, Olga Sedova, Yulia Pronina

  70-80

• On numerical integration for effective stress assessment at notches

  Enrico Maggiolini, Paolo Livieri, Roberto Tovo

  Pages 117-123

• On one approach to the numerical modeling of the strain-stress state of layered rock mass

  Sergey Yurevich Lobanov, Alexander Baryakh

  255-266

• On relation between J-integral and heat energy dissipation at the crack tip in stainless steel specimens

  Giovanni Meneghetti, Mauro Ricotta, Giuseppe Pitarresi

  82-96

• On short cracks that depart from elastoplastic notch tips

  Verônica Miquelin Machado, Jaime Tupiassú Pinho de Castro, Marco Antonio Meggiolaro

  Pages 236-244

• On the applicability of Miner’s rule for multiaxial fatigue life calculations under non-proportional load histories

  Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro, Samuel Elias Ferreira, Hao Wu

  Pages 98-105

• On the applicability of multi-surface, two-surface and non-linear kinematic hardening models in multiaxial fatigue

  M.A Meggiolaro, J.T.P. Castro, H. Wu

  pages 357-367

• On the stress investigation at the edges of the fixed elastic semi-strip

  N. Vaysfeld, O. Kryvyi, Z. Zhuravlova

  Pages 1-11

• On the use of the Theory of Critical Distances to estimate the dynamic strength of notched 6063-T5 aluminium alloy

  T. Yin, A. Tyas, O. Plekhov, A. Terekhina, L. Susmel

  pages 220-225

• Optimization design based approach for the determination and minimization of the displacement under tensile load in hybrid composite joint

  Sahli Abderahmane, Fouzia Merabbi, Abdelkader Lousdad, Abdelkader Megueni

  281-298