Analytical, computational and physical Models

All Items

• Fatigue failure analysis of pin-loaded lugs

  Slobodanka Boljanovic, Stevan Maksimovic

  PAges 313-321

• Fatigue life assessment for a welded detail: advantages of a local energetic approach and experimental validation

  Luigi Viespoli, Filippo Berto, Aurelio Somà

  121-134

• Fatigue life prediction of casing welded pipes by using the extended finite element method

  Ljubica Lazi? Vuli?evi?, Aleksandar Raji?, Aleksandar Grbovi?, Aleksandar Sedmak, Živ?e Šarko?evi?

  Pages 46-54

• Fatigue life prediction of pedicle screw for spinal surgery

  Š. Major, V. Kocour, P. Cyrus

  pages 379-388

• Fatigue Life Simulation and Analysis of Aluminum Alloy Sheet Self-piercing Riveting

  Qingchun Zheng, Naixin Wang, Peihao Zhu, Jingna Liu, Wenpeng Ma

  141-151

• Fatigue modelling for gas nitriding

  H. Weil, S. Jégou, L. Barrallier

  Pages 61-66

• Fatigue strength of inner knurled interference fit joined by forming and cutting methods

  Lukas Suchy, E. Leidich, A. Hasse, T. Gerstmann, B. Awiszus

  429-434

• FE analysis of cruciform welded joints considering different mechanical properties for base material, heat affected zone and weld metal

  Pasqualino Corigliano, Vincenzo Crupi, Eugenio Guglielmino, Wolfgang Fricke

  pages 304-310

• The FEA and experimental stress analysis in circular perforated plates loaded with concentrated force

  Mateusz Konieczny, Grzegorz Gasiak, Henryk Achtelik

  164-173

• FEM simulation of a crack propagation in a round bar under combined tension and torsion fatigue loading

  R. Citarella, M. Lepore, A. Maligno, V. Shlyannikov

  pages 138-147

• FFS Master Software For Fitness-For-Service Assessment of Hydrogen Induced Cracking Equipment Based on API 579-1/ASME FFS-1

  Razieh Karimihaghighi, Masoumeh Naghizadeh, Sirus Javadpour

  187-212

• Finite Element Analysis and ANFIS investigation of seismic behavior of sandwich panels with different concrete material in two story steel building

  Faezeh Jafari, Baitollah Badarloo

  209-230

• Finite Element Analysis of Interactions of between two cracks in FGM notched Plate under Mechanical Loading

  Aboubakar Seddik Bouchikhi, Abdelkader Lousdad, Khalfi Yassine, Nasser Eddine Bouida, Sadek Gouasmi, Abdelkader Megueni

  174-192

• Finite Element analysis of stress state in the cement of total hip prosthesis with elastomeric stress barrier

  Allaoua Fadela , Lebbal Habib, Belarbi Abderrahmane

  281-290

• Finite element analysis of the interface defect in ceramic-metal assemblies: Alumina-Silver

  Bouafia Farida, Lamia Hadid, Boualem Serier, Sardar Sikandar Hayat

  1-12

• Finite Element Analysis of the thermo-Mechanical Behavior of composite Pipe Elbows under Bending and Pressure loading

  Elamine Abdelouahed, M. Mokhtari, H. Benzaama

  698-713

• Finite element analysis of the thermomechanical behavior of metal matrix composites (MMC)

  Zaoui Bouchra, Baghdadi Mohammed, Boualem Serier, Mohammed Belhouari

  174-188

• Finite element modeling and experimental studies on mixed mode-I/III fracture specimens

  M. Bozkurt, A. O. Ayhan, M. F. Yaren, S. Siriç

  pages 350-359

• Finite Element Modeling of the Behavior of a Hollow Cylinder in a Hydrogen-Containing Environment

  Assia Amina Lakhdari, Serguey A. Bubnov, Aissa Seddak, Ilya I. Ovchinnikov, Igor G. Ovchinnikov

  236-253

• Finite-element simulation of residual stresses induced by laser shock peening in TC4 samples structurally similar to a turbine blade

  Anastasiia Kostina, Maxim Zhelnin, Sathya Swaroop, Alena Vedernikova, Mariia Bartolomei

  1-11

• Finite-element study of residual stress distribution in Ti-6Al-4V alloy treated by laser shock peening with varying parameters

  Anastasiia Kostina, Maxim Zhelnin, Elena Gachegova, Alexander Prokhorov, Aleksei Vshivkov, Oleg Plekhov, Sathya Swaroop

  419-436

• Finte element modeling of the behavior of polymethyl-methacrylate (PMMA) during high pressure torsion process.

  Ahmed Drai, Benaoumeur Aour, Naima Belayachi, Abderrahim Talha, Noureddine Benseddiq

  181-196

• Flaw-tolerance of nonlocal discrete systems and interpretation according to network theory

  A. Infuso, M. Paggi

  pages 302-312

• Flexural behavior of delta and bi-delta cold-formed steel beams: experimental investigation and numerical analysis

  Yazid Hadidane, Nadia Kouider, Mohammed Benzerara

  69-88

• Flexural testing and analysis of full-strain-fields in sandwich composites

  Rosa Marat-Mendes, Ricardo Martins, Alexandre Garcia, Luis Reis

  568-585

• Forecasting bearing capacity of the mixed soil using artificial neural networking

  Abdoullah Namdar

  285-294

• Forming Process Analysis of an AA6060 Aluminum Vessel

  Gillo Giuliano, Costanzo Bellini, Luca Sorrentino, Sandro Turchetta

  164-172

• Four-point bending test on a middle strength rock: numerical and experimental investigations

  Aria Mardalizad, Riccardo Scazzosi, Andrea Manes, Marco Giglio

  Pages 504-523

• Fractal statistics of brittle fragmentation

  M. Davydova, S. Uvarov

  Pages 60-68

• Fracture analysis of AA6061-graphite composite for the application of helicopter rotor blade

  Saleemsab Doddamani, Chao Wang, M. Sheik Mohamed Jinnah, Md. Arefin Kowser

  191-201

• Fracture failure analysis of baseplates in a fluidic amplifier made of WC-11Co cemented carbide

  H. Liu, K. Yin, J.M. Peng, Q.L. Yin

  pages 53-65

• Fracture modelling of adhesively-bonded joints by an inverse method

  Raul Campilho, Filipe Viana, Ricardo Rocha, Daniel Silva, Rui Araújo, José Ribeiro

  286-303

• Fracture processes numerical modeling of elastic-brittle bodies with statistically distributed subregions strength values

  Eugeniia Feklistova, Artur Mugatarov, Valeriy Wildemann, Anton Agishev

  425-439

• Fracture toughness of rough and frictional cracks emanating from a re-entrant corner

  Andrea Carpinteri, Andrea Spagnoli, Michele Terzano, Sabrina Vantadori

  Pages 175-182

• Fracture toughness of TiAl-Cr-Nb-Mo alloys produced via centrifugal casting

  A. Brotzu, F. Felli, D. Pilone

  pages 20-25

• Fretting fatigue crack propagation rate under variable loading conditions

  C. Gandiolle, S. Fouvry

  pages 232-241

• Fretting in complete contacts - the use of Williams’ solution

  D. A. Hills, R. Flicek

  pages 61-66

• From test data to FE code: a straightforward strategy for modelling the structural bonding interface

  M. A. Lepore, M. Perrella

  Pages 191-201

• Frontiers of fracture and fatigue: Some recent applications of the local strain energy density

  F. Berto, S.M.J. Razavi, J. Torgersen

  Pages 1-32

• Fully implicit numerical integration of the Yoshida-Uemori two-surface plasticity model with isotropic hardening stagnation

  Riccardo Fincato, Seiichiro Tsutsumi, Alex Zilio, Gianluca Mazzucco, Valentina Salomoni

  114-126

• Geometric numerical integrators based on the Magnus expansion in bifurcation problems for non-linear elastic solids

  A. Castellano, P. Foti, A. Fraddosio, S. Marzano, M. D. Piccioni

  pages 128-138

• Gradient enriched linear-elastic crack tip stresses to estimate the static strength of cracked engineering ceramics

  Harm Askes, Luca Susmel

  Pages 87-93

• Growth of inclined fatigue cracks using the biaxial CJP model

  G. Laboviciute, C. J. Christopher, M. N. James, E. A. Patterson

  pages 167-173

• Hexagrid-Voronoi transition in structural patterns for tall buildings

  elena mele, massimiliano fraldi, Gian Maria Montuori, gianpaolo perrella, vincenzo della vista

  186-208

• High cycle fatigue assessment of steel load-carrying cruciform welded joints: an overview of recent results

  song wei, Xuesong Liu

  94-101

• High magnification crack-tip field characterisation under biaxial conditions

  B. Moreno, P. Lopez-Crespo, J. Zapatero

  Pages 145-152

• Identification of the anisotropic behavior of the laser welded Interstitial Free steel HC260Y subjected to uniaxial tensile tests

  Latifa Arfaoui, Amel Samet, Amna Znaidi

  282-293

• Identification of the plastic zone using digital image correlation

  M. Rossi, M. Sasso, G. Chiappini, E. Mancini, D. Amodio

  pages 552-557

• Impact of specific fracture energy investigated in front of the crack tip of three-point bending specimen

  J. Klon, J. Sobek, L. Malíkova, S. Seitl

  Pages 183-190

• Implementation of a damage model in a finite element program for computation of structures under dynamic loading

  Nasserdine Oudni, Youcef Bouafia

  pages 278-284