Abstract
Elber assumed that the actual driving force for fatigue crack growth (FCG) is the effective stress intensity factor ΔKeff. To verify this hypothesis, both DC(T) and C(T) specimens are cut from a 6351-T6 Al alloy circular bar with two different thicknesses, 2 and 30mm, tested under fixed ΔK and Kmax to simulated plane stress and plane strain FCG conditions. A strain-gage bonded on the back face of the specimens is used to measure the crack length and a custom-made Labview program is used to control the applied load, maintaining ΔK and Kmax constant along the crack path. Moreover, the crack opening load is redundantly measured during the FCG tests, using far field strains from the back face gage and near field strains from a series of gages bonded along the crack path, as well as an independent digital image correlation system to measure displacement/strain fields on the face of the specimens. These tests show that the Al specimens reproduce the behavior previously observed in similar tests in 1020 steel: a significant decrease of the opening load as the cracks grow along the specimens, while maintaining a FCG rate essentially constant under the fixed {ΔK, Kmax} loading, a behavior that cannot be explained by the ΔKeff hypothesis.
Keywords
Article history
- ReceivedUntil the next stage: 57 days
- AcceptedUntil the next stage: 31 days
- Published
How to cite
APA
IEEE
MLA
Chicago
Harvard
Vancouver
BibTeX
RIS
Licence
Copyright © 2019 Julián Andrés Ortiz González, Jaime Tupiassú Pinho de Castro, Giancarlo Luis Gomez Gonzáles, Marco Antonio Meggiolaro, José Luiz de França Freire.
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Fracture and Structural Integrity (F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit, providing a link to the license, and indicating if changes were made.
Similar articles
Most read articles by the same author(s)
- Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro, Samuel Elias Ferreira, Hao Wu, On the applicability of Miner’s rule for multiaxial fatigue life calculations under non-proportional load histories , Fracture and Structural Integrity: Vol 11 No 41 (2017): July 2017
- Jaime Tupiassú Pinho de Castro, Marco Antonio Meggiolaro, Is notch sensitivity a stress analysis problem? , Fracture and Structural Integrity: Vol 7 No 25 (2013): July 2013
- Julián Andrés Ortiz González, Jaime Tupiassú Pinho de Castro, Giancarlo Luis Gomez Gonzáles, Marco Antonio Meggiolaro, José Luiz de França Freire, On DIC measurements of DeltaKeff to verify if it is the FCG driving force , Fracture and Structural Integrity: Vol 11 No 41 (2017): July 2017
- Manuel de Freitas, Luis Reis, Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro, Comparison between SSF and Critical-Plane models to predict fatigue lives under multiaxial proportional load histories , Fracture and Structural Integrity: Vol 10 No 38 (2016): October 2016
- Samuel Elias Ferreira, Jaime Tupiassú Pinho de Castro, Marco Antonio Meggiolaro, A model to quantify fatigue crack growth by cyclic damage accumulation calculated by strip-yield procedures , Fracture and Structural Integrity: Vol 11 No 41 (2017): July 2017
- Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro, Hao Wu, A two-step multiaxial racetrack filter algorithm for non-proportional load histories , Fracture and Structural Integrity: Vol 11 No 41 (2017): July 2017
- Verônica Miquelin Machado, Jaime Tupiassú Pinho de Castro, Marco Antonio Meggiolaro, On short cracks that depart from elastoplastic notch tips , Fracture and Structural Integrity: Vol 11 No 41 (2017): July 2017
- Hao Wu, Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro, Application of the Moment Of Inertia method to the Critical-Plane Approach , Fracture and Structural Integrity: Vol 10 No 38 (2016): October 2016
- Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro, Luiz Fernando Martha, Luiz Fernando Nazaré Marques, A unified rule to estimate multiaxial elastoplastic notch stresses and strains under in-phase proportional loadings , Fracture and Structural Integrity: Vol 10 No 38 (2016): October 2016
- Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro, Hao Wu, Incorporation of Mean/Maximum Stress Effects in the Multiaxial Racetrack Filter , Fracture and Structural Integrity: Vol 10 No 38 (2016): October 2016