Tip: use quotes for an exact phrase, e.g. "teacher education"
The knowlegde of dynamic mechanical properties is useful in all cases where the strain rate sensitivity of metallic materials is an issue, and whenever the actual loading conditions for a structure (either in normal operation or under…
A present study reveals the influence of nano Al2O3 and ZrO2 reinforcements on the fracture toughness of Hybrid Metal matrix Composites (HMMCs) made of Al6061 alloy. Composites are synthesized by varying weight fraction of alumina and…
A methodology of experimental research on hydrogen embrittlement of pipe carbon steels due to the transportation of hydrogen or its mixture with natural gas by a long-term operated gas distribution network is presented. The importance of…
Due to their severe operating conditions, many industrial components are subjected to complex combinations of cyclic mechanical stresses and thermal pressures. These combinations are responsible for the initiation and propagation of…
This paper presents an experimental and numerical characterization, typical for adhesive aerospace applications. The task is carrying two steps. The first consists on the analysis of a single lap joint produced by a carbon fiber fabric…
In this study, the relationships between processing, structure and properties of self-reinforced ultra-high molecular weight polyethylene (UHMWPE) composites fabricated via thermal pressing are investigated. By systematically varying…
Development of aluminium composites by stircasting technique is an effective method for fabrication of better quality of MMCs. Stircasting technique is one of the most commonly accepted techniques. In this research work, Al6061 / TiB2+CeO2…
In this paper, an approach is proposed that allows for the selecting of the parameters of the shunt circuit that provide multimodal damping of vibrations for the corresponding piezoelectric element location. This technique is based on a…
The present study focused on the evaluation of critical influencing parameters of the FSW of AA6061-T6 and AA2024-T351 alloys. The materials properties of AA6061-T6 are heat-treatable alloys possessing properties of good resistance to…
The literature review showed insufficient relevant research on the application of Glass-Fiber-Reinforced-Polymers (GFRP) gratings in the structural elements, while GFRP bars, laminate, sheets, and strips, have been extensively explored.…
One environmental problem in most countries is the huge quantities of plastic waste, which has different types of polymers such as polyethylene terephthalate (PET), polypropylene (PP)., These plastics become a problem because of their…
The objective of this study is to analyze the performance of composite bonding repair, hole drilling and the combination of the two techniques (hybrid repairs) by tensile tests and to show the interest of a hybrid repair versus to other…
Low temperature fracture toughness and fracture energy are two important measures that could be used to investigate the impacts of using asphalt modifiers on the performance of asphalt pavements in cold regions. The aim of this research…
This study aimed to apply sandwich panel in a two-story steel building to improve its behavior. Sandwich concrete panels consist of three basic components including wires, insulating layer and concrete cover. This research studied the…
Most research on the mode II fracture toughness of fiber-reinforced concrete (FRC) has intentionally avoided bridging fibers at pre-notch surfaces by using a through-thickness crack (TTC) that cuts the entire thickness, including fibers in…
The safety of dams is a priority at the international level, based on a large amount of data from a dam-reservoir allows analysts to make optimization on its structural stability, the latter is based on the estimation of the probability of…
In this study, in order to evaluate the effects of heavy vacuum slops (H.V.S) as rejuvenator and nano-Zycosil as an anti-stripping agent on used encapsulation method and mechanical performance of asphalt mixture samples, scanning electron…
-The influence of exploitation period and temperature on the fatigue crack growth parameters in different regions of a welded joint is analysed for new and exploited low-alloyed Cr-Mo steel A-387 Gr. B. The parent metal is a part of a…
In a series of applications, steel reinforced concrete structures are subjected to fatigue loads during their service life, what in most cases happens in corrosive environments. Surface treatments have been proved to represent proper…
This study investigates the effects of low concentration (0.1-0.4 wt.%) nano-boron carbide (B4C) reinforcement on the mechanical, thermal and fracture properties of epoxy nanocomposites. The nanocomposites were prepared via solution…
Aluminum composites exhibit high resistance to wear and corrosion, possess high strength, offer durability and more such properties. In this study, Al7075, reinforced with nano size SiC - Gr was produced by a stir casting technique and its…
The use of bonded externally polymer reinforced fiber (FRP) Laminates has been introduced as an effective approach in rehabilitating (RC) structures due to their high strength, corrosion resistance, reduced weight, and ease of use. This…
In the present paper, fatigue tests were performed on sand-blasted AlSi10Mg samples produced by Direct Metal Laser Sintering (DMLS). The effect of sand-blasting on surface properties was evaluated by roughness and residual stresses…
The Equal Channel Angular Pressing is a hardening treatment with which ductile metals can beprocessed to refine their grain and sub-grain structure. This process enhances the mechanical strength of metalsin terms of tensile strength…
This paper presents the analysis of the temperature and exploitation time impact on the resistant measure to brittle fracture of welded joint constituents of the new and exploited low-alloyed Cr-Mo steel A-387 Gr. B from the aspect of…
Our research described in this paper focused on fabricating and characterising polylactic acid (PLA) composites reinforced with randomly dispersed boron nitride nanoplatelets (BNNP). The integrated experimental analysis with the Finite…
The demanding material quality criteria in the automotive and aerospace industries have recently had an impact on the development of lightweight aluminium alloys. The choice and application of metal-matrix composites as structural…
The use of fibre reinforced polymers (FRP) for increasing the strength of RC structures became a usual method. FRP presents easy application and demands low space and provide significant strength increase. Usually, the decision for FRP use…
Inconel 625 is a nickel-based superalloy that finds application in many industrial sectors thanks to its high strength, excellent fabricability, and outstanding corrosion resistance. It is characterized by a good weldability and often used…
Ultrasonic fatigue at an operating frequency of 20 kHz was conducted on thermally treated clay bricks at 500, 750, and 1000 °C with a holding time of 5 h, using a three-point bending setup to assess their fatigue endurance. A Vickers…
Understanding the failure modes of damaged or cracked structures and repaired by bonding a composite patch is an essential point to improve its resistance to failure and subsequently extend its service life. In the present study, a 3D…
The paper presents the stress distribution along the plate thickness in a bimetallic steel – titanium circular, axially symmetrical perforated plate produced in the technological process of explosion welding. The steel layer is the layer…
Experimental tests were conducted on additive manufactured Ti-6Al-4V titanium alloy to investigate the mechanical and crack properties under multiaxial cyclic loading. Selective Laser Sintering technique (SLS) was employed to fabricate…
The current study focuses on the influence of varying levels of boron-carbide (B4C) particles on mechanical and tribological characteristics of Al7075 hybrid composites that are strengthened by fixed percentages of graphite (Gr) and…
Al6061 and its composites are widely employed in applications requiring high strength and impact resistance. Heat treatment, particularly ageing, is a well-established method for enhancing the mechanical properties of these composites.…
The corrosion behavior of 304L stainless steel rebars in an alkaline solution simulating new concrete subjected to acid rain attack and a mildly to slightly acidic solution simulating corroded cover concrete that exposed the reinforcement…
In the present work, the fracture resistance of a carbon fiber composite under mode I and mode II loading have been experimentally determined. For the mode I and II, the energy release rate G has been determinate for each material. In some…
Aluminum composites with varied weight percentages of 0-2.5 B4C particles and micro- and nanoparticle sizes were fabricated by stir-casting. The material's mechanical and wear characteristics were evaluated. We used dry pin-on-disc wear…
The effects of SiC-Al2O3 particle in the Al alloy on the mechanical and wear characteristics of stir-casted Composites have been reported. The Al7075 is reinforced with 2, 4, 6 and 8 wt. % of (SiC + Al2O3) to manufacture the hybrid…
The present study investigates the influence of corrosion exposure on the fatigue behavior of S460NL high-strength structural steel, a material that is frequently utilized in offshore and civil engineering structures. Accelerated corrosion…
In this paper the fatigue crack growth tests were carried out on surface-crack tension (SCT) specimens, made of 7050 and Ti6Al4V alloys, with initial semi-elliptical surface cracks. Pure Mode I conditions were realized on SCT specimens…
FML (Fibre Metal Laminate) is a hybrid material that presents outstanding structural properties, such as resistance to cyclic and dynamic loads, together with low specific weight. This material consists of metal sheets alternating to…
Glass Fiber Reinforced Polymer (GFRP) I-sections offer a promising alternative to traditional steel reinforcement due to their reduced weight and maintenance requirements. This study aims to optimize the design of GFRP-reinforced composite…
An analytical investigation using ABAQUS/Explicit dynamic analysis was carried out to investigate the effect of using Micro/Nano silica in the presence of steel fibers on improving the dynamic response of reinforced concrete beams.…
Al composites usage is growing and is gaining importance in aerospace, automotive and marine industries due to their excellent characteristics. Aluminum composites exhibit high resistance to wear and corrosion, possess high strength, offer…
The paper presents an experimental analysis of the state of stress, free supported on the edge of a steel – titanium circular perforated plate loaded with a centrally concentrated force, created in the technological process of explosion…
The development of additive technologies for manufacturing safety‑critical components operating under vibration must be accompanied by a careful analysis of the material’s resistance to high‑cycle fatigue (HCF). This paper presents a…
Strain-based design for offshore pipeline requires a considerable experimental work aimed to determine the material fracture toughness and the effective strain capacity of pipe and welds. Continuum damage mechanics can be used to limit the…
Limit equilibrium engineering analysis needs the incorporation of probabilistic approaches for the determination of soil strength statistical measures for deterministic and probabilistic analyses. For the commonly used Mohr–Coulomb…
Fatigue tests were conducted on cylindrical bars specimens to understand the fatigue behavior of SICLANIC®. Although it displays good resistance in monotonic tension, this material weakens and shows a softening in repeated solicitation.…
