Tip: use quotes for an exact phrase, e.g. "teacher education"
A viable approach to solve inverse problems in elasticity is proposed. It is based on regression algorithms to estimate materials and/or loading parameters by fitting the experimentally-evaluated displacement field to representative…
The paper describes the results of an experimental study of a polyurethane material treated by ion implantation technology. The problems of crack growth in the near-surface layer carbonized by ion treatment were investigated using digital…
A mixed-mode geometry has been chosen to investigate a crack propagation using the multi-parameter fracture mechanics concept. The so-called Williams’ series expansion is used for the crack-tip stress field approximation. It has been shown…
Experimental and numerical studies investigating fatigue crack growth were conducted on flat samples made of stainless steel AISE 304 and titanium alloy Grade 2. The heat flux from the crack tip caused by plastic deformation localization…
Structural failure assessment approaches take into account local parameters, specimen geometry, loading and material. In the case of welded joints, in addition to these parameters, consideration must be given to the effect of the…
Pulsed thermography is an active non-destructive technique which uses optical excitation source to stimulate heating of the object under investigation. This work is devoted to the simulation of the pulsed thermography method in a steel…
When the width of cracked nanocomponents made of brittle or quasi-brittle materials is less than approximately , the size of the - dominance zone becomes smaller than and comparable to the fracture process zone ( ). The fracture process…
Marble specimens are subjected to a specially designed stepwise loading protocol, in an attempt to detect fracture precursor phenomena taking advantage of Acoustic Emission (AE) data. The analysis is carried out in terms of the number of…
Various failure modes induce localized internal damage and stress concentration sites in power plant components, causing additional plasticity that degrades material strength. Effect on such localized plasticity on components durability…
This study investigates the mechanical behavior of 3D-printed polyethylene terephthalate glycol (PETG) polymer specimens subjected to tensile and shear testing, with a particular focus on the influence of raster orientation and shell…
The fracture behavior of quasi-brittle materials such as concrete is characterized by the presence of a fracture process zone (FPZ) that precedes the main crack. Within this zone, various mechanisms, including the formation of microcracks…
In the case of particle reinforced composites, where the particles are in a form of sharp material inclusions, singular stress concentration exists on each tip of each inclusion. This is due to the geometric and material discontinuities…
This study investigates the effects of complex (nonproportional) loading on plastic deformation in aluminum alloys (Al-6% Mg), with a focus on understanding surface morphology changes driven by the Portevin–Le Chatelier effect. Mechanical…
In fracture mechanics (domain of cracked environments), it is concerned to forecast the behavior of the structures until their ruin. Friction Stir Welding (FSW) is a new process for solid-state joining, it can weld high strength aluminum…
In this paper, we developed a mathematical modeling to represent the damage of thermoplastic pipes. On the one hand, we adapted the theories of the rupture pressure to fit the High Density Polyethylene (HDPE) case. Indeed, the theories for…
This research discusses the micromechanical modelling for thermoplastic composite material. Elastoplastic and damage model for PEEK matrix composite with the dependency of properties to stress state is presented. Plasticity initiation…
In this paper, the effect of corrosion on the performance of the bonded composite patch repair in aluminum alloy A5083 marine structure was investigated using three dimensional finite element methods. To this end, two patches made in…
Crack formation in hemispherical domes is a distinguished problem in structural mechanics. The safety of cracked domes has a long track record; the evolution of the cracking pattern received less attention. Here, we report…
The Algerian seismic code assumes that the beam-column joints in monolithic reinforced concrete (RC) buildings are fully rigid. However, many experiments have proven the existence of relative rotations in these connections, and then the…
Concrete is a porous material containing aggregate of different sizes, hardened cement matrix with air pores, microcracks and water. Concrete internal structure is different from that of other engineering materials. Furthermore concrete is…
Vast number of theoretical and experimental works has been devoted to the study of discontinuous plastic deformation (the Portevin-Le Chatelier effect), which manifests itself for most widely used alloys in certain ranges of both…
In this paper the effect of reinforcement crack position and loading conditions (in mode I) on the stress intensity factors of the Al/SiCp metal matrix composite was examined using a finite element method. A simple cubic cell model with…
A new method for computing fracture mechanics parameters using computational Eddy Current Modelling by Multi-layer Perceptron Neural Networks for detecting surface cracks. The method is based upon an inverse problem using an Artificial…
The general regularities of damage healing during the annealing after cold deformation of metal materials are presented in this paper. In categories of damage mechanics the kinetic equations of damage healing during recovery and…
This study aims to assess the delamination effect and predict the evolution of damage in 3D printed specimens to investigate the mechanical behavior occurring due to the delamination of the layers of 3D printed thermoplastic polymers.…
This study aims to analyze the effect of thermo mechanical coupling damage in the presence of a phase change (austenite/martensite) in 35NCD16 steel. The impact of increasing mechanical traction load, accompanied by a martensitic…
The present work investigates the compressive mechanical response of three lattice structures manufactured via VAT photopolymerization. A bio-inspired architecture, derived from the observation of Euplectella aspergillum, was compared with…
This paper presents a refined Finite Element (FE) modeling strategy for analyzing the failure behavior of regular masonry structures reinforced with timber-based retrofit solutions. The proposed model schematizes the masonry as brick…
This paper investigates the use of digital image correlation (DIC) and finite element analysis for strain measurement on Printed Board Circuits (PCBs). Circuit boards (PCBs) are designed to mechanically support and electrically connect an…
The study presents and compares an application of two procedures to identify the crack tip location in PVC Sent samples under a uniaxial tensile test based on the image processing method. An IDS camera captures several photos of the PVC…
Additive manufacturing (AM) is revolutionizing various industries by enabling the creation of complex structures with minimal waste. In the context of a circular economy, the importance of recycling cannot be overstated, as it plays a…
This study analyses the failure mechanisms of bilayer hybrid composites, consisting of carbon and glass fibres embedded in an epoxy matrix, under bending loads. The objective is to evaluate how different hybrid configurations influence…
This study represents a methodology to assess the probability of failure based on three the driving force formulations defined by the corresponding brittle and ductile fracture criteria for compact and bending specimens made of 34XH3MA and…
Polymers are known to be sensitive to aging; their lifetime can be predicted through experimental tests. The present paper presents an experimental study on the long-term performance of polymethyl methacrylate (PMMA) exposed to solar and…
Elastic fracture mechanics commonly defines the fracture resistance of brittle materials within an idealised picture of planar and traction free cracks. An efficient approach to describe the interface conditions in real cracks, such as…
Most techniques of measuring the stress intensity factor (SIF) in the cracking process assume a crack in a planar medium. Currently, there is no effective approach for curved brittle shells, particularly for non-developable cases, i.e.…
Tanks and reservoirs are structural systems designed for storing various liquids, gravels, granular or other bulk materials. Special attention is usually given to the potable water storage. Regarding the increasing scarcity of clean water…
Particleboard (PB) are wood-based composites with fine wood fibers bound together by a small amount of polymeric adhesive, widely used in furniture industry and civil engineering. PB plates can be painted, laminated or veneered, and have…
The phenomenon of brittle fracture occurs too often in various branches of engineering being the reason of unexpected termination of anticipated service lives of an engineering objects. This leads to unfortunate catastrophic structural…
The article presents the results of computational and experimental studies of the strength and damageability of a connecting composite part in a metal-composite joint of isogrid and anisogrid structures made of polymer composite material…
