Tip: use quotes for an exact phrase, e.g. "teacher education"
The stepped isostress method (SSM) is an advanced technique which allows the prediction of the long-term behavior and enables the construction of creep master curves of materials with short-term experimental tests. However, the performance…
The aim of this work is to investigate the mechanical behavior of sandwich structures when subjected to edgewise and flatwise compression loadings, using 2D Digital Image Correlation (DIC). These structures are made of Glass Fiber…
The dynamic mechanical property of concrete is very complex and is one of the hot spots in academic research. In this paper, concrete is considered as a three-phase composite composed of cement mortar matrix, coarse aggregate and…
This research is based on the study of the fatigue behavior of an aluminum alloy plate with a central crack. The plate is subjected to a tensile loading on its lower and upper parts. Several parameters were highlighted, such as the loading…
Ultrasonic fatigue at an operating frequency of 20 kHz was conducted on thermally treated clay bricks at 500, 750, and 1000 °C with a holding time of 5 h, using a three-point bending setup to assess their fatigue endurance. A Vickers…
This study focuses on ductile fracture behavior prediction for Ti6Al4V alloys fabricated via Selective Laser Melting (SLM). A modified Gurson-Tvergaard-Needleman (GTN) model characterizes void growth and shear mechanisms under uniaxial…
Additive Manufacturing (AM) is a technological process in which elements are fruitfully built up adding materials layer by layer. AM had a massive development in recent times, thanks to its intrinsic advantages, especially if compared with…
This study aims at assessing the impact of casting size on the bainitic transformation, resulting microstructures, and tensile properties of a high-carbon, high-silicon steel austempered at different temperatures. The casting size was…
Conductive PLA is an innovative composite material that combines the ecological benefits of polylactic acid, a biodegradable thermoplastic, with electrical conductivity properties. Usually used in additive manufacturing for its ease of…
In this work, the effect of Ti addition and the cast part size on the solidification structure and mechanical properties of a medium carbon, low alloy cast steel was analyzed. The experimental analysis involved the design of the melts by…
The purpose of this study is to analyze the behavior of a crack with and without reinforcement by a composite patch of an aluminum plate in mode I using the finite element method. The repair patch is boron / epoxy and Carbon / epoxy, which…
This study presents an experimentally calibrated methodology to enhance the predictive accuracy of finite element simulations for Fused Deposition Modeling (FDM) parts in Abaqus by replacing idealized filament geometry with a physically…
The present work consists of a contribution in modeling the mechanical behavior of cork in compression. For this purpose, compression tests are performed in the non-radial direction on high density reproduction cork samples. Cork shows…
Fracture behavior of adhesive joints is an important topic in structural design of new structural elements or in retrofitting of existing ones. The mechanical models available in literature capable of predicting the failure mode of these…
The impact of n-B4C on the mechanical and tribological behavior of Al7075 particle reinforced composites were assessed by analyzing samples of the resultant nano-composites for micro-structure, hardness, tensile strength, and wear behavior…
The use of magnesium alloys, in particular AZ31B-H24, represents an increasingly important aspect in the transport field, as well as in the aeronautical industry. In the forming processes of this material, the shapes of the product are…
The aluminum alloy are extensively used in several industrial applications. Stir casting is one of the most frequently accepted methods. In the present investigation, how the microstructure, mechanical and wear mechanics of A357 alloy were…
Under cyclic load, local fatigue damage will occur in the metal damper widely used in the shear wall. This will deteriorate the stiffness of damper and weaken the hysteresis behaviour. The present paper proposed a new and easy method to…
Piezoelectric effects are exploited in an increasing number of micro- and nano-electro-mechanical systems. In particular, energy harvesting devices convert ambient energy (i.e. mechanical pressure) into electrical energy and their study is…
In the present work, a new model of the FRP-concrete or masonry interface, which accounts for the coupling occurring between the degradation of the cohesive material and the FRP detachment, is presented; in particular, a coupled…
The research focuses on examining the impact of technological defects, specifically "dry-spot" and "wrinkles," on the mechanical behavior and buckling resistance of structural composites. The investigation of the buckling phenomenon was…
In order to study the mechanical behavior of reactive powder concrete (RPC) filled square steel tubular columns, this paper designs an eccentric compression experiment for 12 specimens of RPC filled square steel tubular column and studies…
This paper presents a dynamic and critical buckling analysis of the presence of a crack of steel-polymer concrete composite beams modelled using a refined quasi 3D beam theory. The beam model is a hollow steel box section filled with a…
The current energy policy envisages extended lifetime for the current nuclear power plants (GEN II NPP). This policy imposes a large research effort to understand the ageing of power plant components. In this goal, it is necessary to…
Given the field of application and the many advantages, the use of FGM (Functionally Graded Materials) materials has recently been extended in several components and more particularly in cylindrical structures, which have been the subject…
In the present work, the influence of alloying elements, on the mechanical characteristics and wear behavior by modification of the chemical composition of the ductile iron was studied, in order to improve these characteristics for the…
The main goal of the present research is to propose an integrated methodology to address the fatigue performance of topology optimized components, produced by additive manufacturing. The main steps of the component design will be…
This article presents the results of a comparative experimental study on the influence of date palm fibers to replace polypropylene fibers used as reinforcement in self-compacting concrete (SCC). Indeed, the use of polypropylene fibers…
In the present study the impact behavior of gravity casting AlSi10Mg alloy was evaluated with an instrumented Charpy pendulum. The effect of hot isostatic pressing, also followed by a T6 treatment, was analyzed in comparison with samples…
This paper discusses the application of machine learning techniques, notably artificial neural networks (ANN), in the fracture analysis of semi-infinite elastic plates with edge cracks. The Stress Intensity Factor (SIF) model for a…
Ultrasonic fatigue tests were carried out on stainless steel AISI 316 and 304, under two modalities: at room temperature and in immersion (water for 316 and antifreeze for 304 steels); all tests were carried out with a loading ratio R=-1.…
In this work the mechanical behaviour of a core reinforced composite sandwich structure is studied. The sandwich employs a Glass Reinforced Polymer (GRP) orthotropic material for both the two external skins and the inner core web. In…
The good management of drinking water begins with a supply network, with a low rate of leakage. Currently, the pipes used in the water transport system are mainly made of polymeric materials, such as HDPE. The corrosion degradation of this…
The paper presents a study of the application of Leak-Before- Break (LBB) concept in a relatively small-diameter high energy reactor coolant line, where it is proposed type AISI 316LN to be used as base material welded with type AISI 316L…
The present study of Ti6Al4V alloy production via Electron Beam Melting (EBM) represents a cutting-edge research topic impacting different strategic engineering applications. This can be attributed to the widespread use of this alloy and…
Aluminum composites exhibit high resistance to wear and corrosion, possess high strength, offer durability and more such properties. In this study, Al7075, reinforced with nano size SiC - Gr was produced by a stir casting technique and its…
This paper analyses industrial PVC sheets structural integrity assessment widely used for different ranges of industrial applications. We investigated combined approaches focused on fracture toughness assessment to predict PVC mechanical…
Despite the growing diffusion of composite materials in automotive and aerospace sectors, a standard procedure for testing their crashworthiness has not been developed yet. At present, the international standards for testing composite…
The interest of using combined sand of equal percentage of silica and limestone becomes evident in the formulation of compacted concrete in several previous works around the world, due to the formidable percentage of fines that improves…
The demanding material quality criteria in the automotive and aerospace industries have recently had an impact on the development of lightweight aluminium alloys. The choice and application of metal-matrix composites as structural…
This research examines the mechanical characteristics of polymer composites (PMMA) that are reinforced with Hydroxyapatite (HAp), with a particular emphasis on the Elastic Modulus and Compressive Strength. The investigation employs a…
This study explores how ageing temperature and the volume percentage of Al2O3+B4C nanoparticles influence the machinability and hardness of stir-cast Al-7075 Metal Matrix Composite (MMC). Using liquid metallurgy techniques, hybrid…
The present study focused on the evaluation of critical influencing parameters of the FSW of AA6061-T6 and AA2024-T351 alloys. The materials properties of AA6061-T6 are heat-treatable alloys possessing properties of good resistance to…
This study aims to analyze the effect of thermo mechanical coupling damage in the presence of a phase change (austenite/martensite) in 35NCD16 steel. The impact of increasing mechanical traction load, accompanied by a martensitic…
Shape memory effect (SME) and the relation with corrosion behavior of Cu-Zn-Al Smart Memory Alloys (SMAs) were investigated using different techniques: Scanning Electron Microscopy equipped with an Energy Dispersive System, X-Ray…
This work focuses on the mechanical characterization of the inorganic matrix used for Fiber-Reinforced Cementitious Matrix (FRCM) composites, nowadays widely used to retrofit existing reinforced concrete and masonry structures. While…
In this work the finite element method (FEM) was used to analyze the mechanical behavior of the composite materials subjected to the mechanical loading. This behavior is studied in terms of stress intensity factor variation as a function…
When studying mechanical behavior of structures made of laminated polymer composite materials, issues related to their relatively high susceptibility to damage, such as delamination, fiber breakage and matrix failure, play significant…
Friction stir welding (FSW) is an extremely complex process because it depends on the intrinsic and extrinsic factors of the material under consideration. The purpose of the present work is to formulate a set of recommendations concerning…
Magnesium alloys have generated renewed interest as a light alloys; replacing some conventional structural materials for weight reduction in applications like aerospace, automotive and electronics industries. In interior components and…
