Tip: use quotes for an exact phrase, e.g. "teacher education"
The current study focuses on the influence of varying levels of boron-carbide (B4C) particles on mechanical and tribological characteristics of Al7075 hybrid composites that are strengthened by fixed percentages of graphite (Gr) and…
The built-in heterogeneity of the composite laminates has been exploited to tailor the stiffness and strength requirements of modern structures to meet the specific functional demands. However, the non-homogeneity in these composites is…
The present study aims to develop a novel hybrid composite by incorporating clamshell as a secondary reinforcing filler into a bamboo-epoxy composite. The primary objective of this hybridization is to optimize the synergistic benefits of…
The effects of SiC-Al2O3 particle in the Al alloy on the mechanical and wear characteristics of stir-casted Composites have been reported. The Al7075 is reinforced with 2, 4, 6 and 8 wt. % of (SiC + Al2O3) to manufacture the hybrid…
This study investigates the physico-mechanical properties, mineralogical composition, deterioration processes, weathering patterns, and durability of building materials in the Ottoman Fort of Tamentfoust, Algiers, to inform heritage…
This work focuses on the synthesize of nanostructured (Fe65Co35)100-x (Pr6O11)x (x = 0, 5) powders using high energy ball milling. The influence of Pr6O11 on structural, morphological and magnetic properties of Fe65Co35 nanoparticles were…
This work investigated the effects of graphene and SiO2 addition on the mechanical and fracture properties of epoxy (80%) - Polylactic acid (PLA) (20 %) composites. Epoxy-PLA composites were loaded with graphene and SiO2 (0.1-0.5 wt. %…
Slow strain rate stress corrosion test of X80 steel in the natural seawater are carried out to study to effect of dissolved oxygen on the sensitivity of stress corrosion. Scanning electron microscope (SEM) combined electrochemical…
Diffusion welding is an advanced joining process that assures the feasibility of joining dissimilar metal alloys without producing metallurgical impurities at the joint interface. Two significant aerospace alloys, AA2219 and Ti-6Al-4V, are…
This study explores how ageing temperature and the volume percentage of Al2O3+B4C nanoparticles influence the machinability and hardness of stir-cast Al-7075 Metal Matrix Composite (MMC). Using liquid metallurgy techniques, hybrid…
In this study, in order to evaluate the effects of heavy vacuum slops (H.V.S) as rejuvenator and nano-Zycosil as an anti-stripping agent on used encapsulation method and mechanical performance of asphalt mixture samples, scanning electron…
Adding short carbon fiber reinforcement to thermoplastic matrices can improve the mechanical performance of additively manufactured polymer-based composites. This work examines the flexural behavior of Fused Deposition Modeling…
Shape memory effect (SME) and the relation with corrosion behavior of Cu-Zn-Al Smart Memory Alloys (SMAs) were investigated using different techniques: Scanning Electron Microscopy equipped with an Energy Dispersive System, X-Ray…
Abstract. In this article, the effect of nano-clay particles and heat-treating on thermo-mechanical fatigue (TMF) behaviors and failures of piston aluminum-silicon (AlSi) alloys was investigated. For this purpose, thermo-mechanical fatigue…
Microstructural characteristics, monotonic and strain-controlled cyclic axial behaviors of AW2099-T83 Aluminum-Lithium alloy were investigated. Grain sizes and structures are not uniform in the different orientations studied. High strength…
The post-curing process of cured composites is essential in enhancing the strength, stiffness, elevating the glass transition temperature, and reducing residual stress in polymer thermoset composites. The curing temperature and time are…
Research in innovative construction materials has focused on utilising supplementary materials in cementitious composites to promote sustainable development and reduce CO2 emissions. Within this context, this study aims to investigate the…
Development in material science impose to use different materials in production. This causes a problem for joining different materials because traditional joining techniques such as welding could not overcome this problem in industries…
The widespread use of carbon fibre-reinforced polymer (CFRP) composites in sectors such as aerospace and aviation calls for the adoption of sustainable recycling protocols. This research evaluates the mechanical and tomographic…
To investigate the mixing amount of graphene oxide and water cement ratio on the microstructure and mechanical properties of graphene oxide reinforced cement based composite material, graphene oxide suspension was developed using improved…
Brazing is a widely employed joining technique for aluminium components due to its cost-effectiveness and compatibility with complex geometries. However, the structural integrity of brazed joints under cyclic loading remains a scarcely…
In the present paper, fatigue tests were performed on sand-blasted AlSi10Mg samples produced by Direct Metal Laser Sintering (DMLS). The effect of sand-blasting on surface properties was evaluated by roughness and residual stresses…
Our research described in this paper focused on fabricating and characterising polylactic acid (PLA) composites reinforced with randomly dispersed boron nitride nanoplatelets (BNNP). The integrated experimental analysis with the Finite…
The purpose of this study was to understand the behavior of martensitic H13 steel in accordance with the microstructural evolution, mechanical properties and wear in repeated tempering cycles. The microstructures were characterized by axio…
There are deficiencies associated with cold mix asphalts, specifically, cold recycled mix asphalts in comparison with hot mix asphalt or hot recycled mix asphalt such as higher moisture susceptibility. Moisture damage of asphalt mixtures…
The effect of processing parameters on the mechanical and metallurgical properties of dissimilar joints of AA6082–AA6061 produced by friction stir welding was analysed in this study. Different FSW samples were produced by varying the…
This study presents an experimentally calibrated methodology to enhance the predictive accuracy of finite element simulations for Fused Deposition Modeling (FDM) parts in Abaqus by replacing idealized filament geometry with a physically…
This work introduces an experimental study to evaluate the effect of elevated temperatures on the mechanical properties of high-performance concrete (HPC) mix with changes in Water-Cementitious ratios, W/(C+SF), Silica Fume percent, SF…
Fatigue tests were conducted on cylindrical bars specimens to understand the fatigue behavior of SICLANIC®. Although it displays good resistance in monotonic tension, this material weakens and shows a softening in repeated solicitation.…
This study investigates the effect of interleaving non-woven veils and their surface areal density on the curved beam strength (CBS) and interlaminar radial stress (ILRS) of glass/epoxy L-bend composite laminates. Carbon veils with areal…
Having Low density and being Light weight with better mechanical properties, aluminum is the most significant material and is universally used in highly critical applications like navy, aerospace and particularly automotive activities.…
Development of aluminium composites by stircasting technique is an effective method for fabrication of better quality of MMCs. Stircasting technique is one of the most commonly accepted techniques. In this research work, Al6061 / TiB2+CeO2…
Biaxial tension-torsion fatigue tests are carried out on the membrane material Nafion 115 (perfluorosulfonic acid, PFSA). This polymeric material is used in fuel cells as proton exchange membrane, undergoing frequently mechanical loading…
The aluminum alloy are extensively used in several industrial applications. Stir casting is one of the most frequently accepted methods. In the present investigation, how the microstructure, mechanical and wear mechanics of A357 alloy were…
Hydrogen Re-Embrittlement on anodically coated high strength steels is a relevant risk for aerospace structures due to the possibility of hydrogen uptake during the operative life of the components. AISI 4340 and Maraging 250 unnotched…
In the current work 17-4PH Stainless Steel is deposited using SLM process. It is widely used to build structural parts appropriate for automotive, medical, and aerospace applications. The 17-4 PH SS samples were deposited using technical…
A new class of material characterized by mechanical properties close to the traditional low and medium carbon steel is the Ductile Cast Irons (DCIs). High castability and low production costs allow them to be used in many fields, ranging…
In this study, the relationships between processing, structure and properties of self-reinforced ultra-high molecular weight polyethylene (UHMWPE) composites fabricated via thermal pressing are investigated. By systematically varying…
Aluminium composites are extensively used in several industrial applications. The production of Metal Matrix Composite (MMCs) with varying wt. % of reinforcement/s leads to enhancement of wear and mechanical behavior. In the present work…
An experimental technique is presented to evaluate mechanical and thermal load-induced microstructural damage, based on the Electron Probe Micro-Analysis (EPMA) principle, by which certain analytical potentialities of Scanning Electron…
Additive manufacturing (AM) technologies are currently contributing to significant progress in the design of lightweight metal components. Al alloys constitute the most studied light metal, particularly the Al-Si ones, due to their high…
In this paper, the effect of welding parameters of rotary friction welding between AA6063 and AISI4130 and AA6063 and Copper are investigated. The major influencing parameters considered are upset pressure, friction time and friction…
The present study present the influence of SiCp incorporation on three-body abrasive wear behavior of glass/epoxy composites. The investigations was carried out using dry sand rubber wheel abrasive wear test apparatus. 2k factorial design…
