Tip: use quotes for an exact phrase, e.g. "teacher education"
In this research work by changing different parameters of soil foundation like density, cohesion and foundation depth and width of square foundation at angle of friction of 0° to 50° with increment of 5°, numerically safe bearing capacity…
Orthotropic decks were applied to the long span bridges after World War II due to several advantages, such as light weight, high strength, few deck joints, durability, rapid construction, life-cycle economy. The fatigue problem of…
This work primarily aims to carry out a numerical assessment of the seismic vulnerability of the historical Rammed Earth (RE) remains of the enclosure of Mansourah, a small town in the Wilaya (Province) of Tlemcen, in northwestern Algeria.…
Estimation of the fatigue limit for steel ductile materials using non-destructive methods is a topic of great interest to researchers today. In recent years, the method adopted has implemented infrared sensors to detect the surface…
The Boussinesq solution, one of the fundamental problems in the theory of elasticity, enables an analysis of stresses and strains (displacements) in a semi-elastic space subject to surface loads. This solution has a form of formulas for…
The paper investigates the fatigue crack growth in typical bridge weldments by means of numerical analysis. The extended finite element (XFEM) method is coupled with the low-cycle fatigue (LCF) approach in ABAQUS, and parametric analyses…
Among the most promising models introduced in recent years, with which it is possible to obtain very useful results for a better understanding of the physical phenomena involved in the macroscopic mechanism of crack propagation, the one…
Beam-column joints which shoulders high-level and vertical shearing effect that maintains balance of beam and column end is the major component influencing the performance of the whole framework. Post earthquake investigation suggests that…
Two parallel comparative ‘Conventional Method and Computer Simulation using ANSYS software’ for prediction of crack growth and its behavior in optical fiber are studied and presented in this work. Corresponding finite element analysis was…
The dynamic mechanical property of concrete is very complex and is one of the hot spots in academic research. In this paper, concrete is considered as a three-phase composite composed of cement mortar matrix, coarse aggregate and…
In this work, powder compaction process was investigated by using a numerical material model, which involves Mohr-Coulomb theory and an elliptical surface plasticity model. An effective algorithm was developed and implemented in the ANSYS…
In this work different strategies to estimate crack path for cylindrical contacts under fretting conditions are carried out. The main goal is to propose and to evaluate methodologies not only to estimate the direction of crack initiation…
The presented work introduces a numerical parametric study on the crack propagation direction under mixed-mode conditions (mode I + II). It is conducted for the geometry of an eccentric asymmetric fourpoint bending of a single edge notched…
The literature review showed insufficient relevant research on the application of Glass-Fiber-Reinforced-Polymers (GFRP) gratings in the structural elements, while GFRP bars, laminate, sheets, and strips, have been extensively explored.…
The use of temporary hip prosthesis made of orthopedic cement (spacer) in conjunction with antibiotics became a prevalent method used for prosthetic infections remedy; consequently, this method makes bone cement (PMMA) more fragile. Hence…
An analysis focused on capturing the phenomenon of quasibrittle fracture is presented. Selected parameters relevant for quasi-brittle fracture are evaluated and an assessment of their dependence on the size and shape of the test specimen…
Arch bridges play an important role in rural roads in China. Due to insufficient funds and a lack of management techniques, many rural arch bridges are in a state of disrepair, unable to meet the increasing transportation needs. Thus, it…
The dynamic behavior of beam-like structures with fatigue cracks forced by harmonic excitation is characterized by the appearance of sub and super-harmonics in the response even in presence of cracks with small depth. Since the amplitude…
Results of secondary creep tests for salt rock specimens were mathematically described. Elastic-viscoplastic modeling of viscous properties of salt rocks was based on elastoplastic models using a non-associated Mohr-Coulomb plastic flow…
Departing from pioneering Heyman modern rational investigations on the purely-rotational collapse mode of least-thickness circular masonry arches, the hypothesis that joint friction shall be high enough to prevent inter-block sliding is…
The investigation of multiple crack interactions in fracture mechanics is important to predict the safety and reliability of structures. This paper introduces a numerical investigation used to calculate the J-integral of the main crack…
Selecting the correct objective function is the critical precondition for a successful optimization task. The validity of this condition is also required when optimization algorithms are needed for the inverse identification of the unknown…
Wafer bonding describes all technologies for joining two or more substrates directly or using certain intermediate layers. Current investigations are focused on so-called low temperature bonding as a special direct bonding technology. It…
This paper aims to explore the dynamic behavior of a segmental masonry arch subjected to increasing horizontal displacements of one support. To this end, output-only dynamic identification techniques are first used to track the evolution…
Glass Fiber Reinforced Polymer (GFRP) is a promising alternative to steel due to its high strength, lightweight properties, corrosion resistance, and low maintenance requirements. This study examines the effect of internal GFRP I-sections…
The paper provides an evaluation of the nonlinear dynamic response of a cantilever beam made of composite material subjected to low-velocity impacts. The structure is assumed to respond in a quasi-static manner and modelled by a continuous…
This paper presents an advanced optimization methodology for truss structures, addressing both elasto-plastic design cases—where plastic deformations are controlled within predefined limits—and purely elastic scenarios, in which inelastic…
Presence of cracks in mechanical components needs much attention, where the stress field is affected by cracks and the propagation of cracks may be occurred causing the damage. The objective of this paper is to present an investigation of…
The objective of this work is to analyze some geometrical effect to predict the damage of aluminum 2024T3 structure after validate numerical model by experimental test. The mechanical of damage behaviour under tensile tests of several…
The paper analyses the numerical algorithms for experimental data processing using a contactless video system Vic-3D, designed for three-dimension analysis of displacement and strain fields, and digital image correlation method. The…
Elbows under load experience more stress and strain than straight tubes. The strength of the composite tubes plays an important role in their use, the damage under a thermomechanical behavior of a composite tubular structure bent between…
The analysis of fracture processes which led to shear failure in reinforced concrete beams without transverse reinforcement was performed on the basis of test results from the author’s own experimental investigation and numerical…
In the last years, a large amount of fatigue test results from plain and bluntly notched specimens made of AISI 304L stainless steel were synthetized in a single scatter band by adopting the specific heat loss per cycle (Q) as a damage…
Laser shock peening (LSP) is used to enhance surface quality of the metallic structures by the generation of compressive residual stresses on it. This work studies the effect of the main LSP parameters on residual stress fields by the…
This paper provides a finite element analysis of laminated composite plates under the action of a moving vehicle. The vehicle is modeled as a rigid body with four suspension systems, each consisting of a spring-dashpot. Overall, the…
Fracture behavior of adhesive joints is an important topic in structural design of new structural elements or in retrofitting of existing ones. The mechanical models available in literature capable of predicting the failure mode of these…
The use of composite materials allows to have a great flexibility in terms of mechanical and physical characteristics. One of the most used composite structure in naval field, is the sandwich, which is composed by a stacking sequence of…
The increased terrorist attacks on important public structures and utilities have raised the vital necessity for the investigation of performance of structures under blast loads to improve the design and enhance the behavior of structures…
The objective of the present paper is to investigate the stress-controlled low-cycle fatigue behavior of piston aluminum-silicon (AlSi) alloy reinforced with nano-clay particles and T6 heat-treatment. The piston aluminum-silicon alloy…
This is the second part of a short three-paper series, aiming to revisit some classical concepts of Linear Elastic Fracture Mechanics. Being the intermediate step of the analysis between infinite domains (discussed in Part-I) and finite…
In this paper, the initial and maximum load was studied using the Finite Element Modeling (FEM) analysis during impact testing (CVN) of pipeline X70 steel. The Gurson-Tvergaard-Needleman (GTN) constitutive model has been used to simulate…
The indentation response of a pseudoelastic nickel-titanium based shape memory alloy (SMA) has been analyzed. Indentation tests have been carried out at room temperature using a spherical diamond tip and indentation loads in the range…
In this paper an automatic procedure based on a machine learning approach is proposed to classify ductile cast iron specimens according to the American Society for Testing and Materials guidelines. The mechanical properties of a specimen…
Within the framework of limit design applied to masonry structures, this paper aims at analyzing the different behavior of a pavilion dome according to the adopted construction and reinforcement technologies. By using the static theorem…
The mechanical response and the failure mode of thin metal foils under tensile load has been analyzed supplementing the usual test records with full-field measurements performed by three-dimensional digital image correlation (3D DIC)…
Given the field of application and the many advantages, the use of FGM (Functionally Graded Materials) materials has recently been extended in several components and more particularly in cylindrical structures, which have been the subject…
This study examines the influence of graphene nanoplatelets (GNPs) and multi-walled carbon nanotubes (MWCNTs) on the mechanical properties of SiO2-loaded epoxy-polylactic acid (PLA) composites. Epoxy and PLA were mixed to form the matrix…
The use of adhesive bonds greatly increased in industrial applications, as they have multiple advantages compared to other more traditional bonding methods (fastened, welded and riveted joints). The number of approaches to predict the…
In this paper, the finite element (FE) method was used to investigate the axial compressive behaviors of circular and square concrete filled aluminum tubes (CFAT). Firstly, the simulational results were compared with the experimental…
In this study, we present a new implementation of the phase field fracture approach in the finite element code ANSYS and its numerical background. The framework is general, and is supported by addressing several classical 2D boundary value…
