Tip: use quotes for an exact phrase, e.g. "teacher education"
Looking at the long-time behaviour of a dam, it is necessary to assume that the water can penetrate a possible crack washing away some components of the concrete. This type of corrosion reduces the tensile strength and fracture energy of…
The aluminum alloy are extensively used in several industrial applications. Stir casting is one of the most frequently accepted methods. In the present investigation, how the microstructure, mechanical and wear mechanics of A357 alloy were…
A detailed investigation was conducted into the fracture mechanisms of cylindrical specimens made of a polycrystalline heat-resistant nickel-based alloy XH73MBTU-VD (EI698-VD), under uniaxial tension in the temperature range of 25–700°C.…
For wedge splitting test specimens, the stress and displacement fields both in the vicinity and also in larger distance from the crack tip are investigated by means of numerical methods. Several variants of boundary conditions were…
Shear strength is one of the properties often used to qualify a wood species for use in industry. But until now there is no standardized test which allows understanding this phenomenon. This paper constitutes a new approach to study the…
A straightforward methodology for modelling the cohesive zone (CZM) of an adhesively bonded joint is developed, by using a commercial finite element code and experimental outcomes from standard fracture tests, without defining a damage law…
Developing a reliable numerical modelling technique is considered as challenge for fracture assessment of the geological materials, which are much subjected to hydrostatic pressure. For this purpose, the mechanical behaviour and the…
The knowlegde of dynamic mechanical properties is useful in all cases where the strain rate sensitivity of metallic materials is an issue, and whenever the actual loading conditions for a structure (either in normal operation or under…
The compliance method was first applied to short rod specimens to determine the nonlinear fracture toughness of rock materials by ISRM (International Society for Rock Mechanics) in the 1980s. In this study, utilizing the techniques of the…
The purpose of this study was to understand the behavior of martensitic H13 steel in accordance with the microstructural evolution, mechanical properties and wear in repeated tempering cycles. The microstructures were characterized by axio…
New developments in thermal spraying processes may offer higher-quality alternatives to hard chrome plating and possibilities for hard chrome plating in a range of coating applications. These include spraying with high-velocity air fuel…
Aluminium composites are extensively used in several industrial applications. The production of Metal Matrix Composite (MMCs) with varying wt. % of reinforcement/s leads to enhancement of wear and mechanical behavior. In the present work…
Fracture behavior of adhesive joints is an important topic in structural design of new structural elements or in retrofitting of existing ones. The mechanical models available in literature capable of predicting the failure mode of these…
The present paper is devoted to an experimental study on the fracture behaviour of natural stones, commonly used as elements for building cladding, under both monotonic and cyclic loading, with particular emphasis to white Carrara marble.…
This paper studied the effects of specimen size and type on the real-mode-I fracture toughness (KIC )of steel fiber-reinforced concrete (SFRC) specimens. Mode I KIC tests were performed using semicircular bend (SCB) and center-cracked…
In recent years, the use of natural fiber composites to provide a possible replacement for synthetic fiber composites for practical applications has been the subject of several studies. This study deals with the fabrication and…
This study concerns the multiaxial static and fatigue strength properties. Short-glass-fibre-reinforced phenolic-resin composites (SGP) molded by injection and compression processes were subjected to tensiontorsion combined static and…
While it is well known that fatigue crack growth in metals that display confined slip, such as high strength aluminium alloys, develop crack paths that are responsive to the loading direction and the local microstructural orientation, it…
Bamboo and wood are the most widely applied and the oldest natural structural materials in the world. Currently, worldwide output of wooden material is 1 billion ton, almost the same as steel. Most of them are used as structure, such as…
A recently proposed cohesive-zone model which effectively combines damage, friction and mechanical interlocking has been revisited and further validated by numerically simulating the pull-out test, from a concrete block, of a ribbed steel…
The influence of the joint line remnant (JLR) on tensile and fatigue fracture behaviour has been investigated in a friction stir welded Al-Mg-Sc alloy. JLR is one of the microstructural features formed in friction stir welds depending on…
The paper presents a study of the application of Leak-Before- Break (LBB) concept in a relatively small-diameter high energy reactor coolant line, where it is proposed type AISI 316LN to be used as base material welded with type AISI 316L…
In the current European standards for design of timber structures, the issue of timber-to-timber joint type is addressed only to squared timber, which makes the pinpointing of the round timber bolted joints load carrying capacity…
In the present paper, microstructural and mechanical properties of an innovative AlSi3Mg alloy were studied. Particularly, the effect of the addition of Cr and Mn on tensile strength and impact toughness was evaluated. In fact, the…
The present work aims to model the fracture mechanical behavior of a high-strength low carbon steel, AISI 4130 operating in hydrogen contaminated environment. The study deals with the development of 2D finite element cohesive zone model…
The fatigue behaviour of circumferentially notched specimens made of titanium alloy, Ti-6Al-4V, has been analysed. To investigate the notch effect on the fatigue strength, pure bending, pure torsion and multiaxial bending-torsion fatigue…
The ambient and high-temperature fatigue crack growth behaviors in C(T) and SENT specimens of Ni-based superalloy for turbine disk application were studied in a wide interval of temperatures 25–750°C using a combination a electro- and…
This paper is concerned with the fracture of composite materials containing stress concentration features such as notches and holes. In particular, it addresses the question of the use of the Theory of Critical Distances (TCD) – a method…
The paper focuses on the effects of shear deformation and shear forces on the mode II contribution to the energy release rate in delaminated beams. A critical review of the relevant literature is presented, starting from the end-notched…
Steel-concrete joints are often made by welded shear studs. However, this connection reduces the fatigue strength, especially in situations where locally concentrated loads occur with a large number of load cycles e.g. in bridge decks. In…
This study investigates the effect of interleaving non-woven veils and their surface areal density on the curved beam strength (CBS) and interlaminar radial stress (ILRS) of glass/epoxy L-bend composite laminates. Carbon veils with areal…
This paper presents numerical models of a 3D printed plastic joint applicable to the connection of wooden structures. The research presented provides a comparison of two alternative solutions for the geometry of the joint and results from…
Aluminium (Al) based composites enhance the mechanical and wear behavior by heat treatment. The quenching factors like cooling agent, cooling rate and temperature of cooling are expected to influence the hardness, tensile, and wear…
Bendable concrete is also defined as engineered cementitious composites because of its great ductility and tight fracture width limitation. ECC mixtures by adding additional Portland cement, silica sand and fly ash, fiber types…
Mixed mode crack propagation analysis has been more accessible with the development of new numerical tools, allowing to evaluate the influence of non-mode I loadings in the crack path and in the growth rate. The aim of this work is to…
This paper analyses industrial PVC sheets structural integrity assessment widely used for different ranges of industrial applications. We investigated combined approaches focused on fracture toughness assessment to predict PVC mechanical…
The Al2O3-SiC reinforced Al7075 Metal Matrix Composite (MMCs) is fabricated through liquid metallurgical technique. Ceramic particulates were amalgamated into aluminium alloy to achieve improved mechanical properties and wear resistance.…
In the present work, the fracture resistance of a carbon fiber composite under mode I and mode II loading have been experimentally determined. For the mode I and II, the energy release rate G has been determinate for each material. In some…
The analysis of fracture processes which led to shear failure in reinforced concrete beams without transverse reinforcement was performed on the basis of test results from the author’s own experimental investigation and numerical…
The scope of the present work is to point out a consistent simulation procedure for the quasi-static fracture processes, starting from the micro-structural characteristics of the material. To this aim, a local nineparameters…
Development of aluminium composites by stircasting technique is an effective method for fabrication of better quality of MMCs. Stircasting technique is one of the most commonly accepted techniques. In this research work, Al6061 / TiB2+CeO2…
Additive manufacturing research is continuously growing, and this field requires a full improvement of the capability and reliability of the processes involved. Of particular interest is the study of complex geometries production, such as…
In this paper, the initial and maximum load was studied using the Finite Element Modeling (FEM) analysis during impact testing (CVN) of pipeline X70 steel. The Gurson-Tvergaard-Needleman (GTN) constitutive model has been used to simulate…
In the present paper, mathematical models are proposed in order to analyze the strength of pinloaded lugs with semi-elliptical crack and through-the-thickness crack. The crack growth investigation of considered crack configurations tackles…
Slow strain rate stress corrosion test of X80 steel in the natural seawater are carried out to study to effect of dissolved oxygen on the sensitivity of stress corrosion. Scanning electron microscope (SEM) combined electrochemical…
A need to timely reveal operational damages and technological defects requires a prompt control of states of structures made from composite materials and their consequent repairs aimed at service life extension. This work is devoted to the…
The work reports the observed fatigue damage of C45 steel specimens tested in a previous work under multiaxial loading conditions and its relationship with the thermal energy dissipation which has been used in the last decades to estimate…
Crack formation in hemispherical domes is a distinguished problem in structural mechanics. The safety of cracked domes has a long track record; the evolution of the cracking pattern received less attention. Here, we report…
Considering the fragility of ultra-thin foil material, the machining methods might bring in undesired and non-neglectable damage, which would affect the uniaxial tensile properties of such material. This presented work systematically…
This paper presents a research about the monotonic and failure behaviours of bolted joints made of thin plates of S350GD and S355MC steels grades, which are used for rack structures. A full factorial test matrix was performed considering…
