Tip: use quotes for an exact phrase, e.g. "teacher education"
The focus of manufacturing is more and more on innovative and application-oriented products considering lightweight construction. Hence, especially functional graded materials come to the fore. Due to the application-matched functional…
This paper presents the experimental work carried out on the fracture behavior of aluminium 6061 (Al6061) and graphite particulate composites. The required specimens are prepared using stir casting method with graphite proportions ranging…
In this study, experimental and numerical results of compact tension shear (CTS) specimen and a new specimen type under in-plane mixed mode (Mode-I/II) loading conditions are compared with existing inplane mixed mode fracture criteria to…
In many engineering applications special requirements are directed to a material's fracture behavior and the prediction of crack paths. Especially if the material exhibits anisotropic elastic properties or fracture toughnesses, e.g. in…
An inhomogeneous distribution of non-metallic inclusions can result from the steel casting process. The aim of the present study was to investigate the damaging effect of an inhomogeneous distribution of nonmetallic inclusions on the crack…
The current energy policy envisages extended lifetime for the current nuclear power plants (GEN II NPP). This policy imposes a large research effort to understand the ageing of power plant components. In this goal, it is necessary to…
In this study, to investigate and understand the nature of fracture behavior properly under in-plane mixed mode (Mode-I/II) loading, three-dimensional fracture analyses and experiments of compact tension shear (CTS) specimen are performed…
The fracture behavior of quasi-brittle materials such as concrete is characterized by the presence of a fracture process zone (FPZ) that precedes the main crack. Within this zone, various mechanisms, including the formation of microcracks…
In this paper, the macro and micro-mechanical fracture behavior was studied for aluminum (Al6061) alloy matrix, reinforced with various proportions of TiC particles such as 3wt%, 5wt% and 7wt%. The Al6061-TiC metal matrix composites were…
A 2D bond-breaking model is presented that allows the extraction of the intrinsic line or edge energy, fracture toughness, and strain energy release rate of graphene from measured and calculated 2D Young’s moduli and 2D pristine strengths.…
The use of Ni-Ti alloys in the practice of endodontic comes from their important properties such as shape memory and superelasticity phenomena, good corrosion resistance and high compatibility with biological tissues. In the last twenty…
An analytical study of longitudinal fracture in two-dimensional functionally graded cantilever beam configurations is carried-out with taking into account the non-linear behavior of material. A longitudinal crack is located arbitrary along…
This paper discusses the application of machine learning techniques, notably artificial neural networks (ANN), in the fracture analysis of semi-infinite elastic plates with edge cracks. The Stress Intensity Factor (SIF) model for a…
This paper is devoted to the numerical and experimental study of ductile fracture in bulk metal forming of the 2017A-T4 aluminum alloy. From an experimental standpoint, the ductile fracture of the 2017A-T4 aluminum alloy is investigated…
This paper deals with the fatigue crack propagation behavior of rolled AZ31B magnesium alloy (grain size: approximately 40 ?m). Fatigue crack propagation tests were performed on single edge notched tension specimens at a stress ratio of R…
The objective of this research work is to study the fracture behavior of Al6061 with graphite particulate composite produced by the stir casting technique. For the study different composition of the particulate metal matrix composite used…
The concept of the average stress has been employed to propose the maximum average tangential stress (MATS) criterion for predicting the direction of fracture angle. This criterion states that a crack grows when the maximum average…
The modified disk shaped compact tension test is a configuration derived from standard compact tension test that is used for measuring fracture mechanical properties of primarily metallic materials. The compact tension configuration is…
A present study reveals the influence of nano Al2O3 and ZrO2 reinforcements on the fracture toughness of Hybrid Metal matrix Composites (HMMCs) made of Al6061 alloy. Composites are synthesized by varying weight fraction of alumina and…
Aluminium (Al) based composites enhance the mechanical and wear behavior by heat treatment. The quenching factors like cooling agent, cooling rate and temperature of cooling are expected to influence the hardness, tensile, and wear…
Simulating the concrete fracture unlike other elastic and brittle materials quite different due to its quasibrittleness. The present research focussed on assess softening behavior by varying different fractions of aggregates and cement…
This study focuses on ductile fracture behavior prediction for Ti6Al4V alloys fabricated via Selective Laser Melting (SLM). A modified Gurson-Tvergaard-Needleman (GTN) model characterizes void growth and shear mechanisms under uniaxial…
High-strength concrete has been widely used in various complex buildings. The fracture and mechanical properties of high-strength concrete after fire have great research value. Based on the double K fracture model, the fracture properties…
The size effect significantly influences the structural design of concrete elements, particularly when applying fracture mechanics principles. As structural dimensions increase, a significant outcome of the size effect is the decline in…
Aluminium composites are extensively used in several industrial applications. The production of Metal Matrix Composite (MMCs) with varying wt. % of reinforcement/s leads to enhancement of wear and mechanical behavior. In the present work…
The delamination fracture in four-point bending beams made of adhesively bonded lengthwise vertical layers is studied assuming that each layer exhibits smooth material inhomogeneity along the width and length of the layer. The study aims…
The aluminum alloy are extensively used in several industrial applications. Stir casting is one of the most frequently accepted methods. In the present investigation, how the microstructure, mechanical and wear mechanics of A357 alloy were…
Analyses of longitudinal fracture behavior of inhomogeneous beams which have continuously varying sizes of the cross-section along the beam length are carried-out. Beams of a rectangular cross-section are studied. It is assumed that beams…
The impact of n-B4C on the mechanical and tribological behavior of Al7075 particle reinforced composites were assessed by analyzing samples of the resultant nano-composites for micro-structure, hardness, tensile strength, and wear behavior…
In this paper we investigated the influence of consecutive dynamic and gigacycle fatigue loads on the lifetime of aluminum-magnesium alloy AlMg6. Preloading of samples was achieved during dynamic tensile tests in the split-Hopkinson bar…
Crack growth and brittle fracture is one of the major failure modes in bone materials and therefore understanding the fracture behavior and affecting parameters on the crack growth resistance of bone is necessary for biomechanics…
Aluminum composites with varied weight percentages of 0-2.5 B4C particles and micro- and nanoparticle sizes were fabricated by stir-casting. The material's mechanical and wear characteristics were evaluated. We used dry pin-on-disc wear…
This paper presents a refined Finite Element (FE) modeling strategy for analyzing the failure behavior of regular masonry structures reinforced with timber-based retrofit solutions. The proposed model schematizes the masonry as brick…
Development of aluminium composites by stircasting technique is an effective method for fabrication of better quality of MMCs. Stircasting technique is one of the most commonly accepted techniques. In this research work, Al6061 / TiB2+CeO2…
Fracture behavior of adhesive joints is an important topic in structural design of new structural elements or in retrofitting of existing ones. The mechanical models available in literature capable of predicting the failure mode of these…
At intermediate service temperatures hot mix asphalt (HMA) concretely are subjected to different loading rates due to movement of vehicles which can significantly affect their mechanical characteristics and final service load. Hence, in…
Single Point Incremental Forming was conducted on Aluminum1100 and Brass CuZn37 to form a hyperbolic truncated pyramid with varying wall angles until the fracture occurs. The formability of the specimens in terms of fracture depth and…
This work is dedicated to the numerical study of the influence of the parameters of statistical distribution of the structural elements’ ultimate strength on fracture processes of deformable bodies with stress concentrators. The loading…
In the present work, the fracture performance of pre-cracked reinforced concrete beams was investigated numerically and experimentally. Experimental and numerical programs were designed to examine the effect of beam width, b, (120 and 250…
A general approach to realization of models of elasticity, plasticity and fracture of heterogeneous materials within the framework of particle-based numerical methods is proposed in the paper. It is based on building many-body forces of…
This work investigated the effects of graphene and SiO2 addition on the mechanical and fracture properties of epoxy (80%) - Polylactic acid (PLA) (20 %) composites. Epoxy-PLA composites were loaded with graphene and SiO2 (0.1-0.5 wt. %…
In the current studies an investigations were made to know the effect of 63 micron sized B4C particles addition on the mechanical and wear behavior of aerospace alloy Al2618 metal composites. Al2618 alloy with different weight percentages…
Among the various severe plastic deformation techniques, Equal Channel Angular Extrusion (ECAE) is a widely used method that introduces significant plastic deformation into a sample by forcing it through two intersecting channels, without…
The main purpose of this paper is to study the anisotropic behavior of laser welded interstitial free steel HC 260Y when it is subjected to monotonic tensile tests. The specimens were cut in different orientations according to the rolling…
The present work aims to model the fracture mechanical behavior of a high-strength low carbon steel, AISI 4130 operating in hydrogen contaminated environment. The study deals with the development of 2D finite element cohesive zone model…
Bamboo and wood are the most widely applied and the oldest natural structural materials in the world. Currently, worldwide output of wooden material is 1 billion ton, almost the same as steel. Most of them are used as structure, such as…
This work is a numerical simulation of nonlinear problems of the damage process and fracture of quasi-brittle materials especially concrete. In this study, we model the macroscopic behavior of concrete material, taking into account the…
This paper presents new analytical model of asymmetric mixed-mode bending (MMB) specimen of adhesively bonded pultruded GFRP joints. An easily applicable relationship for the calculation of the strain energy release rate of the asymmetric…
The use of temporary hip prosthesis made of orthopedic cement (spacer) in conjunction with antibiotics became a prevalent method used for prosthetic infections remedy; consequently, this method makes bone cement (PMMA) more fragile. Hence…
The peculiar geometrical shape and working conditions of crankshafts make fatigue becoming responsible for most of the failure cases in such components. Therefore, improvement of crankshaft performance requires enhancing its fatigue life.…
