Tip: use quotes for an exact phrase, e.g. "teacher education"
The impact of n-B4C on the mechanical and tribological behavior of Al7075 particle reinforced composites were assessed by analyzing samples of the resultant nano-composites for micro-structure, hardness, tensile strength, and wear behavior…
A variant of neural network for processing with images is a convolutional neural network (CNN). This type of neural network receives input from an image and extracts features from the image while also providing learnable parameters to…
In the present paper, fatigue tests were performed on sand-blasted AlSi10Mg samples produced by Direct Metal Laser Sintering (DMLS). The effect of sand-blasting on surface properties was evaluated by roughness and residual stresses…
The S-version Finite Element Method (FEM) is known as a global-local superimposed approach that consists of two separate meshes referred to as global and local cracks. The relationship between the energy release rate and the Stress…
New developments in thermal spraying processes may offer higher-quality alternatives to hard chrome plating and possibilities for hard chrome plating in a range of coating applications. These include spraying with high-velocity air fuel…
Aluminum composites with varied weight percentages of 0-2.5 B4C particles and micro- and nanoparticle sizes were fabricated by stir-casting. The material's mechanical and wear characteristics were evaluated. We used dry pin-on-disc wear…
Aluminum alloys are widely used in the automobile industry because of their excellent mechanical strength, low weight, and remarkable resistance to corrosion and wear. The purpose of this study is to investigate how the microstructure…
Having Low density and being Light weight with better mechanical properties, aluminum is the most significant material and is universally used in highly critical applications like navy, aerospace and particularly automotive activities.…
The third generation Al-Li alloy AA2050-T84 is widely used in aircraft applications due to its lightweight and significant mechanical properties. The anisotropic variations of tensile and compression properties of this alloy at various…
The work is devoted to the study of the Zr-1Nb alloy in coarse-grained and ultrafine-grained states under laser-induced shock-wave loading. This material is of interest due to the application for the manufacture of shells for fuel elements…
In this paper, tensile tests of specimens with a pattern of holes made of fiber-glass plastic based on combined epoxy and phenol-formaldehyde resins are carried out in order to study the processes of damage accumulation and tension…
The present study concerns the experimental investigation of foamed concretes with 1600 kg/m3 density that incorporate biochar additions in the mix. A series of small notched beams are prepared to determine the fracture energy in CMOD…
Ultrasonic fatigue tests were carried out on stainless steel AISI 316 and 304, under two modalities: at room temperature and in immersion (water for 316 and antifreeze for 304 steels); all tests were carried out with a loading ratio R=-1.…
Designing tooling and cooling systems to prevent cutting tool damage is crucial while machining difficult-to-cut nickel alloys. This study investigates the machining effects during turning Inconel 718 using unitary aluminum oxide (Al2O3)…
The criteria for optimizing shock-wave modes to increase the fatigue life of aircraft engine alloys are discussed with reference to laser shock peening (LSP). They are based on the self-similarity of plastic wave fronts and the kinetics of…
Symmetric fatigue in two spring steels is investigated in three groups of specimens. One of the groups (Steel EN10270-1SH/ DIN 17223C – C 0.82%, Mn 0.76%, Si 0.26%) has experienced rotating-bending fatigue in air, and the other two groups…
In recent years, mechanical property of many SMA has improved in order to introduce these alloys in specific field of industry. Main examples of these alloys are the NiTi, Cu-Zn-Al and Cu-Al-Ni which are used in many fields of engineering…
This paper considers an important topic, and one that is often poorly understood or misinterpreted, but which is a determining factor in many aspects of the service performance of metals (and other materials). Engineering components and…
X-ray diffraction is a well-known experimental technique for measuring residual stresses in metallic materials. If XRD is applied to the fracture surface of a broken part it becomes a fractographical technique, that is to say that it is…
Fully automatic fatigue crack growth simulation system is developed using S-version FEM (SFEM). This system is extended to fracture in heterogeneous material. In the heterogeneous material, crack tip stress field becomes mixed mode…
The initial crack path is analysed in a fretting fatigue test with cylindrical contact, where there is a stress gradient and a multiaxial and non-proportional stress state. For this, a cylindrical pad is pressed, with a constant normal…
High cycle fatigue tests were conducted for stainless steel AISI 304L. The geometry was a thin walled tube with a passing through hole. The tests were axial, torsional and in-phase axial-torsional, all of them under load control with R =…
Very-High-Cycle-Fatigue regime for metals was considered and mechanisms of the subsurface crack origination were introduced. In many metals first step of crack origination takes place with specific area formation because of material…
Soft computing techniques, with their self-learning capabilities, fuzzy principles, and evolutionary computational philosophy, are being increasingly utilized in modeling complex machining processes. This study develops artificial neural…
An experimental study was conducted to investigate the influence of operational defects, such as surface scratches and dents, on the residual mechanical properties of glass fiber-reinforced plastic (GFRP) during quasi-static tensile and…
Symmetric fatigue in two spring steels is investigated in three groups of specimens. One of the groups (Steel EN10270-1SH/ DIN 17223C – C 0.82%, Mn 0.76%, Si 0.26%) has experienced rotating-bending fatigue in air, and the other two groups…
Titanium alloy (Ti-6Al-4V) having a bimodal “harmonic structure”, which consists of coarsegrained structure surrounded by a network structure of fine grains, was fabricated by mechanical milling (MM) and spark plasma sintering (SPS) to…
While Additive Manufacturing (AM) of polymers has matured from rapid prototyping to functional production, the layer-wise fabrication process introduces significant mechanical anisotropy and microstructural heterogeneity, which complicates…
This study investigates the effect of interleaving non-woven veils and their surface areal density on the curved beam strength (CBS) and interlaminar radial stress (ILRS) of glass/epoxy L-bend composite laminates. Carbon veils with areal…
A new experimental method for measuring strain fields in highly deformable materials has been developed. This technique is based on an in-house developed Digital Image Correlation (DIC) system capable of accurately capturing localized or…
Microstructural characteristics, monotonic and strain-controlled cyclic axial behaviors of AW2099-T83 Aluminum-Lithium alloy were investigated. Grain sizes and structures are not uniform in the different orientations studied. High strength…
We propose the interpretation of the Finite Fracture Mechanics based on the criticality of damage-failure transition due to specific metastability of free energy release. Multiscale mechanisms of fatigue damage-failure transitions in…
Laser cladding is a relatively new technology how to combine properties of various materials. Thus, bi-material interfaces are presented in real structures and can affect the fatigue crack propagation. A cracked bar subjected to pure…
A new method for computing fracture mechanics parameters using computational Eddy Current Modelling by Multi-layer Perceptron Neural Networks for detecting surface cracks. The method is based upon an inverse problem using an Artificial…
In the current studies an investigations were made to know the effect of 63 micron sized B4C particles addition on the mechanical and wear behavior of aerospace alloy Al2618 metal composites. Al2618 alloy with different weight percentages…
Aluminium (Al) based composites enhance the mechanical and wear behavior by heat treatment. The quenching factors like cooling agent, cooling rate and temperature of cooling are expected to influence the hardness, tensile, and wear…
Bendable concrete is also defined as engineered cementitious composites because of its great ductility and tight fracture width limitation. ECC mixtures by adding additional Portland cement, silica sand and fly ash, fiber types…
This paper presents a research about the monotonic and failure behaviours of bolted joints made of thin plates of S350GD and S355MC steels grades, which are used for rack structures. A full factorial test matrix was performed considering…
This paper deals with the fatigue assessment of cast steel defects in terms of macroscopic shrinkage porosity. Within preliminary studies, a generalized Kitagawa diagram GKD was established by numerical analyses of V-notched specimens with…
Abstract. In this article, the effect of nano-clay particles and heat-treating on thermo-mechanical fatigue (TMF) behaviors and failures of piston aluminum-silicon (AlSi) alloys was investigated. For this purpose, thermo-mechanical fatigue…
In the present study the impact behavior of gravity casting AlSi10Mg alloy was evaluated with an instrumented Charpy pendulum. The effect of hot isostatic pressing, also followed by a T6 treatment, was analyzed in comparison with samples…
In the present paper, microstructural and mechanical properties of an innovative AlSi3Mg alloy were studied. Particularly, the effect of the addition of Cr and Mn on tensile strength and impact toughness was evaluated. In fact, the…
Slow strain rate stress corrosion test of X80 steel in the natural seawater are carried out to study to effect of dissolved oxygen on the sensitivity of stress corrosion. Scanning electron microscope (SEM) combined electrochemical…
Microstructure influence on fatigue crack propagation resistance in five different ductile cast irons (DCI) was investigated. Four ferrite/pearlite volume fractions were considered, performing fatigue crack propagation tests according to…
The existence of three-dimensional effects at cracks has been known for many years, but understanding has been limited, and for some situations still is. Understanding improved when the existence of corner point singularities and their…
In-service fatigue cracking of turbine disks of EI698 superalloy is discussed based on crack growth analyses. In the bolt joint for disks to shaft connecting there is high level of stress-state, which directed to earlier in-disks fatigue…
Composite materials application areas have gradually grown, allowing them to reach and conquer new markets from consumer products to specialized niche applications, advanced composite materials make up a significant portion of the…
This study presents a three dimensional finite element method analysis of semi-elliptical surface cracks in pipes under internal pressure load. In the elastic–plastic case, estimates of the J-integral are presented for various ratios…
Most techniques of measuring the stress intensity factor (SIF) in the cracking process assume a crack in a planar medium. Currently, there is no effective approach for curved brittle shells, particularly for non-developable cases, i.e.…
The role of structural mechanisms responsible for the consequent staging of damage-failure transition as the combination and continuity of ductile and creep kinetics of the structure evolution and the modeling in dwell fatigue regime.…
