Tip: use quotes for an exact phrase, e.g. "teacher education"
The paper deals with the Stress Intensity Factor assessment of cracks at the intersection of holes loaded by internal pressure. Triangular flaws are considered at the intersection of two holes inside a specific specimen. The research…
In recent studies, piezoelectric actuators have been recognized as a practical and effective material for repairing cracks in thin-walled structures, such as plates that are adhesively bonded with piezoelectric patches due to their…
In this study, multiple and non-planar crack propagation analyses are performed using Fracture and Crack Propagation Analysis System (FCPAS). In an effort to apply and validate FCPAS procedures for multiple and non-planar crack propagation…
We predict the fatigue life of a planar tubular truss when geometrical parameters, material properties, and live loads are non-deterministic. A multi-level calculation uncertainty quantification framework code was designed to aggregate the…
In this work, the structural behavior of masonry buildings under flash flood actions is analyzed by using a novel 3D multilevel fluid/structure model. The proposed numerical framework consists of a macro-scale model based on the…
The purpose of this study is to explore the numerical behavior of circular RC short columns with different degrees of confinement with CFRP (0%, 25%, 50%, and 100%) wraps under concentric and eccentric loading. The numerical analysis…
This paper presents an application of the boundary element method to the analysis of crack growth problems in linear elastic fracture mechanics and the correlation of results with experimental data. The methodology consists of computing…
This paper investigated the static and dynamic behaviors of isotropic cracked simply supported beam using finite element analysis (FEA), ANSYS software. Modal and harmonic vibration analysis of intact and damaged beam were performed in…
Stepped steel girders and beams with a jump in section depth are highly susceptible to local web buckling at the step location. Although tapered steel girders have been studied extensively by researchers, abruptly stepped steel girders…
This study has used the strain energy density (SED) approach to evaluate the stress intensity factor (SIF) of cracked cruciform welded joints in Hardox 450 steel. A microstructural analysis was made of Hardox 450 steel which is composed of…
In this work, the prediction of crack initiation angle (θo) under mixed mode (I/II) load is estimated from the generalized minimum plastic zone radius (GMPZR) criterion. The paper presents a detailed study on the crack-tip plastic core for…
This paper presents numerical models of a 3D printed plastic joint applicable to the connection of wooden structures. The research presented provides a comparison of two alternative solutions for the geometry of the joint and results from…
In structural engineering, composite patch repairs are widely used to address cracked structures. However, their behavior under thermo-mechanical loading remains complex and less understood. This study examines the repair of a…
The wide use of cold-formed sections (CFS) in the field of steel constructions, favored by the multiple advantages they offer (lightness, ease of installation, etc.), has led us to reflect on a new process for manufacture of metal beams…
The paper is related to the assessment of collapse mechanisms of historic masonry structures suffering settlements induced by ground movements. Two numerical strategies are adopted in order to study the influence of the settled zone on the…
This work is motivated by the increasing interest towards the application of the “Projection-by-Projection” (PbP) spectral method in finite element (FE) analysis of components under multiaxial random loadings. To help users and engineers…
Belgrade fair hall 1 is well known for its dome, which is still the world largest self-supported construction made of pre-stressed concrete, with its diameter of 106 m. In this paper the Finite Element Method (FEM) was performed to analyze…
Most seismic design codes provide formulas for estimating base shear and lateral loads. To determine lateral loads, the building's fundamental vibration period must be calculated, either theoretically or experimentally. However, there is…
This research aims to characterize the behavior of isolated end-flattened steel bars under compressive loading, in which global instabilities or excessive local deformations represent a significant part of the causes of structural…
Concrete-filled steel tubular (CFST) columns are broadly used in many structural systems for their well-known merits. This paper presents a finite element investigation on the structural behaviour of short circular deficient steel tubes…
The fatigue behaviour of concrete has become more important for the design of constructions due to the desire to build slimmer structures, which are more sensitive to fatigue loading. This article aims to evaluate and compare the fatigue…
Elbows under load experience more stress and strain than straight tubes. The strength of the composite tubes plays an important role in their use, the damage under a thermomechanical behavior of a composite tubular structure bent between…
The study explores the feasibility of a new all-steel buckling restrained brace (BRB) with the double pre-tensioning system as an alternative to conventional concentrically braced frames by using finite element method (ABAQUS program), And…
The aim of this study is to deal with the simulation of intralaminar fatigue damage in unidirectional composite under multi-axial and variable amplitude loadings. The variable amplitude and multi-axial loading is accounted for by using the…
In this study, the main objective was the creation of a code, which gives the capability to a Finite Element Analysis Program with no built-in crack study tools, to study the propagation of a crack, in a cracked surface. For this purpose…
Presented study is focused on the analysis of the dependence of the specific fracture energy value on the assumed work of fracture in threepoint bending tests. Specimens of different sizes and relative notch lengths are assumed in this…
A two-dimensional finite element analysis has been performed to investigate hydromechanical and conventional deep drawing processes. The effects of the fluid structure interaction on the material formability, the strain and the thickness…
This article deals with an analysis of the behaviour of brick ceramic walls. The behaviour of the walls was analysed experimentally in order to obtain their bearing capacity under static loading and their seismic resistance.…
Glass Fiber Reinforced Polymer (GFRP) is a promising alternative to steel due to its high strength, lightweight properties, corrosion resistance, and low maintenance requirements. This study examines the effect of internal GFRP I-sections…
In this work, powder compaction process was investigated by using a numerical material model, which involves Mohr-Coulomb theory and an elliptical surface plasticity model. An effective algorithm was developed and implemented in the ANSYS…
This study investigates the effects of low concentration (0.1-0.4 wt.%) nano-boron carbide (B4C) reinforcement on the mechanical, thermal and fracture properties of epoxy nanocomposites. The nanocomposites were prepared via solution…
This paper presents an advanced optimization methodology for truss structures, addressing both elasto-plastic design cases—where plastic deformations are controlled within predefined limits—and purely elastic scenarios, in which inelastic…
The initiation and propagation of fatigue cracks during cyclic torsion loading was studied in a cast Al alloy (A357) with a relatively large (~500 ?m) grain size. 2D observations, revealed that multi site crack initiation occur on the…
Fatigue surface crack growth and the in-plane and out-of-plane constraint effects are studied through experiments and computations for aluminium alloy D16T. Subjects for studies are cruciform specimens under different biaxial loading and…
Fracture behavior of adhesive joints is an important topic in structural design of new structural elements or in retrofitting of existing ones. The mechanical models available in literature capable of predicting the failure mode of these…
The realization of a connection between a ceramic and a metal is always accompanied by the creation of a multi-axial stress field. Different physical and mechanical origins explain the genesis of stresses at the bonding interface in the…
Presence of cracks in mechanical components needs much attention, where the stress field is affected by cracks and the propagation of cracks may be occurred causing the damage. The objective of this paper is to present an investigation of…
This paper is devoted to the numerical and experimental study of ductile fracture in bulk metal forming of the 2017A-T4 aluminum alloy. From an experimental standpoint, the ductile fracture of the 2017A-T4 aluminum alloy is investigated…
Numerical techniques have been widely applied in many recent works to investigate micro-scale behavior of materials. This work focuses on the analysis of strain localizations in a Nickel-based alloy, Haynes 230. Numerical models and…
In this work, a link between the averaged strain energy density (SED) approach and the peak stress method in the case of cracks subjected to mixed mode (I+II) loading has been investigated. Some closed-form expressions of the strain energy…
The use of adhesive bonds greatly increased in industrial applications, as they have multiple advantages compared to other more traditional bonding methods (fastened, welded and riveted joints). The number of approaches to predict the…
In this research, the variational mode decomposition (VMD) method is used for the drive-by health monitoring of bridges. Firstly, the problem of a half-trailer tractor moving over a bridge is formulated. Next, a Finite Element (FE) code is…
The aim of this work is to investigate stress gradient effects on the fatigue life estimation of notched Al 7050-T7451 specimens under combined torsion and push-pull loading conditions. Initially, simple push-pull and torsion fatigue tests…
In this work different strategies to estimate crack path for cylindrical contacts under fretting conditions are carried out. The main goal is to propose and to evaluate methodologies not only to estimate the direction of crack initiation…
In this work, a link between the averaged strain energy density (SED) approach and the peak stress method in the case of cracks subjected to mixed mode (I+II) loading has been investigated. Some closed-form expressions of the strain energy…
An analysis focused on capturing the phenomenon of quasibrittle fracture is presented. Selected parameters relevant for quasi-brittle fracture are evaluated and an assessment of their dependence on the size and shape of the test specimen…
The crack growth behavior in 2324-T39 aluminium alloy was experimentally investigated. Two types of crack branching were observed. The mechanism of an uncommon crack branching which results from the link up of secondary crack with the main…
This paper presents a refined Finite Element (FE) modeling strategy for analyzing the failure behavior of regular masonry structures reinforced with timber-based retrofit solutions. The proposed model schematizes the masonry as brick…
In this study, the finite element method is used to analyze the effect of corrosion and the behavior of inclined cracks of an aluminum plate Al 2024 -T3 under thermomechanical loading. The effects of the inclination of the crack and the…
A quality of multi-parameter approximation of the stress and displacement fields around a crack tip in a non-brittle material test specimen is studied in the paper. The stress field approximation using Williams power series is intended to…
