Polymers

All Items

• Preliminary results on the effects of orthopedic implant stiffness fixed to the cut end of the femur on the stress at the stump-prosthetic interface

  Ismail Boudjemaa, A. Sahli, A. Benkhettou, S. Benbarek

  160-168

• Preparation and enhanced mechanical properties of epoxy resin modified with pyrolysis bio-oil

  Natalia V Boychenko, Marina Slobozhaninova, Ivan Ishtyryakov, Rustam Yarullin

  207-216

• Recycling of plastic waste polyethylene terephthalate (PET) as a modifier in asphalt mixture: study of Creep-Recovery at Low, Medium, and Hot Temperatures

  Amine Bekhedda, M’hammed Merbouh

  438-450

• Residual life prediction of defected Polypropylene Random copolymer pipes (PPR)

  Abderazzak Ouardi, Fatima Majid, Nadia Mouhib, Mohamed Elghorba

  Pages 97-105

• Strain Energy Density as Failure Criterion for Quasi-Static Uni-axial Tensile Loading

  Andrea Kusch, Simone Salamina, Daniele Crivelli, Filippo Berto

  331-349

• Strain monitoring of cement-based materials with embedded polyvinyl alcohol - carbon nanotube (PVA-CNT) fibers

  Zoi S. Metaxa, Wilfrid Neri, Philippe Poulin, Nikolaos D. Alexopoulos

  Pages 61-73

• Studies on influence of seashell-based filler on water absorption behaviour of bamboo-epoxy composite: mechanical and fractured surface characterization

  H. K. Madhusudhana, Khalid Imran, Sushma M S, Anand K. J., E. Ashoka, Dhummansure Vishalkumar

  21-34

• Study of defects influence on chlorinated polyvinyl chloride pipes damage and analysis of their fracture

  Fatima Gugouch, M. Meknassi, M. Elghorba, A. Wahid, H. Mouradi, H. Bouhssis, A. Maziri

  192-204

• Tension - torsion fatigue tests on the proton exchange membrane Nafion 115 (Perfluorosulfonic acid)

  Gonzalo Mariano DOMINGUEZ ALMARAZ, Luis M. TORRES DUARTE, Christian J. TORRES PACHECO

  360-369

• The effect of energy director on ultrasonic consolidation of multilayered composites (laminates) made from unidirectional PEEK/CF prepregs

  Sergey Panin, Vladislav Alexenko

  315-325

• The impacts of type and proportion of five different asphalt modifiers on the low temperature fracture toughness and fracture energy of modified HMA

  Mehdi Fallah Tafti, Seyyed Abuzar Hoseini Aqda, Hamed Motamedi

  169-185

• The investigation of additive manufacturing and moldable materials to produce railway ballast grain analogs

  Bence Szabó, L. Pásthy, Á. Orosz, K. Tamás

  213-228

• The notch effect on fracture of polyurethane materials

  T. Voiconi, R. Negru, E. Linul, L. Marsavina, H. Filipescu

  pages 101-108

• Ultrasonic welding of lap joints of PEI plates with PEI/CF-fabric prepregs

  Vladislav Alexenko, Defang Tian, Sergey Panin, Svetlana Bochkareva, Iliya Panov

  390-409

• Use of combined CZM and XFEM techniques for the patch shape performance analysis on the behavior of a 2024-T3 aluminum structure reinforced with a composite patch

  Kouider Madani, Safaa Chahrazed Djebbar, Nadia Kaddouri, Mohamed El Ajrami, Mohamed Belhouari

  304-325

• Valorization and recycling of packaging belts and post-consumer PET bottles in the manufacture of sand concrete

  Yasmina Biskri, Mohammed Benzerara, Laidi Babouri, Ouided Dehas , Redjem Belouettar

  225-239

• Web post-buckling strength of thin-webbed cellular beams using carbon PFRP profiles

  Hamda Guedaoura, Yazid Hadidane

  43-61