Analytical, computational and physical Models

All Items

• Comparative study of the repair of cracked plates with two different composite patches

  Moulgada Abdelmadjid, Zagane Mohammed El Sallah, Sahli Abderahmane, Ait kaci Djafar, Zahi Rachid

  187-201

• Comparative study on the deterioration of granite under microwave irradiation and resistance-heating treatment

  He Zi Shou, Qijun Hu, Junsen Zeng, Leping He , Hexi Tang, Bingsheng Li, Shunzhang Chen, Xirui Lu

  638-648

• Comparison between SSF and Critical-Plane models to predict fatigue lives under multiaxial proportional load histories

  Manuel de Freitas, Luis Reis, Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro

  Pages 121-127

• Comparison of the constraint parameters in elastic-plastic fracture mechanics

  Yury Matvienko

  36-43

• Comparison of two multiaxial fatigue models applied to dental implants

  JM. Ayllon, C Navarro, J. Vázquez, J. Domínguez

  pages 415-426

• Comparison of Two Parameters Models for clay brick masonry confinement

  Giancarlo Ramaglia, Gian Piero Lignola, Andrea Prota

  288-312

• Compliant actuation based on dielectric elastomers for a force-feedback device: modeling and experimental evaluation

  R. Vertechy, M. Bergamasco, G. Berselli, V. Parenti Castelli, G. Vassura

  Pages 47-56

• Composite sandwich impact response: experimental and numerical analysis

  Filippo Cucinotta, Paolo Neri, Felice Sfravara, Armando Razionale

  367-382

• Computation of mode I strain energy release rate of symmetrical and asymmetrical sandwich structures using mixed finite element

  Amina Mohamed Ben Ali, Salah Bouziane, Hamoudi Bouzerd

  229-239

• Computational multi-scale analysis of simultaneous processes of delamination and damage accumulation in laminated composites

  Mikhail Tashkinov, Daria Ershova, Aleksandr Shalimov

  396-411

• Computational simulation of biaxial fatigue behaviour of lotus-type porous material

  J. Kramberger, M. Sori, M. Sraml, S. Glodez

  153-159

• Construction of Analytical Eigensolutions for Isotropic Conical Bodies and Their Application for Estimation of Stresses Singularity

  Tatyana Korepanova, Valerii Matveenko, Igor Shardakov

  225-242

• Continuum damage modeling through theoretical and experimental pressure limit formulas

  Fatima Majid, Mohamed Elghorba

  Pages 79-89

• Coupled FEM-DBEM method to assess crack growth in magnet system of Wendelstein 7-X

  R. Citarella, M. Lepore, Joris Fellinger, Victor Bykov, Felix Schauer

  Pages 92-103

• Coupled fracture modes under anti-plane loading

  Les P. Pook, F. Berto, A. Campagnolo

  108-113

• Coupled identification of the hardening behavior laws and Gurson–Tvergaard–Needleman damage parameters - Validation on tear test of 12NiCr6 CT specimen

  Mohamed Hadj Miloud, Ibrahim Zidane, Mohammed Mendas

  630-642

• Coupling crystal plasticity and microstructure in SLM manufactured 316L parts: model development and experimental assessment

  Nikita Kondratev, Alexey Shveykin, Kirill Romanov, Rinetta Mosina , Igor Shishkovsky , Evgeny Kharanzhevskiy, Mikhail Krivilyov

  373-389

• Crack coalescence and strain accommodation in gypsum rock

  Chiara Caselle, Sabrina Maria Rita Bonetto, Daniele Costanzo

  247-255

• Crack detection in beam-like structures by nonlinear harmonic identification

  Paolo Casini, Fabrizio Vestroni, Oliviero Giannini

  pages 313-324

• Crack formation of steel reinforced concrete structure under stress in construction period

  Hua Zhu

  Pages 191-200

• Crack growth rate prediction based on damage accumulation functions for creep-fatigue interaction

  Andrey Tumanov, V.N. Shlyannikov, A.P. Zakharov

  299-309

• Crack growth study under thermo-mechanical loads: parametric analysis for 2024 T3 aluminum alloy

  Salmi abdallah, Mohamed Elajrami, Mohamed El-Amine Slimani

  231-241

• Crack initiation and fracture features of Fe–Co–B–Si–Nb bulk metallic glass during compression

  S. Lesz, A. Januszka, S. Griner, R. Nowosielski

  pages 206-212

• Crack initiation at V-notch tip subjected to in-plane mixed mode loading: An application of the fictitious notch rounding concept

  F. Berto

• Crack of a helicopter main rotor actuator attachment: failure analysis and lessons learned

  L. Allegrucci, F. De Paolis, A. Coletta, M. Bernabei

  Pages 104-122

• Crack onset assessment near the sharp material inclusion tip by means of modified maximum tangential stress criterion

  Ondrej Krepl, Jan Klusák

  Pages 66-73

• Crack path in liquid metal embrittlement: experiments with steels and modeling

  T. Auger, S. Hémery, M. Bourcier, C. Berdin, M. Martin, I. Robertson

  pages 250-259

• Crack path predictions and experiments in plane structures considering anisotropic properties and material interfaces

  P.O. Judt, A. Ricoeur

• Crack path simulation for cylindrical contact under fretting conditions

  R.A. Cardoso, J.A. Araújo, J.L.A. Ferreira, F.C. Castro

  pages 405-413

• Crack paths and the linear elastic analysis of cracked bodies

  L. P. Pook

• Crack paths in smooth and precracked specimens subjected to multiaxial cyclic stressing

  Nicholas R. Gates, Ali Fatemi

• Crack Propagation by Finite Element Method

  Luiz Carlos H. Ricardo

  Pages 57-78

• Crack propagation in a brittle DCB specimen assessed by means of the Williams’ power expansion

  Lucie Malikova, Seyed Mohammad Javad Razavi, Filippo Berto

  34-41

• Crack propagation in fracture mechanical graded structures

  B. Schramm, H.A. Richard

• Crack simulation models in variable amplitude loading - a review

  Luiz Carlos H. Ricardo, Carlos Alexandre J. Miranda

  pages 456-471

• Crack tip field in circumferentially-cracked round bar (CCRB) in tension affected by loss of axial symmetry

  J. Toribio, B. González, J.C. Matos

  Pages 139-142

• Crack tip fields and mixed mode fracture behaviour of progressively drawn pearlitic steel

  J. Toribio, B. González, J.C. Matos

  pages 221-228

• Crack tip strain evolution and crack closure during overload of a growing fatigue crack

  De-Qiang Wang, Ming-Liang Zhu, Fu-Zhen Xuan

  Pages 143-148

• Cracks path growth in turbine blades with TBC under thermo – mechanical cyclic loadings

  T. Sadowski, P. Golewski

  pages 492-499

• Critical applied stresses for a crack initiation from a sharp V-notch

  L. Náhlík, P. Huta, K. Štegnerová

  pages 55-61

• Critical crack path assessments in failure investigations

  Robert D. Caligiuri

• Critical plane approach to multiaxial variable amplitude fatigue loading

  Yingyu Wang, Luca Susmel

  pages 345-356

• Crumbling of Amatrice clock tower during 2016 Central Italy seismic sequence: Advanced numerical insights

  Francesco Clementi, Gabriele Milani, Angela Ferrante, Marco Valente, Stefano Lenci

  313-335

• Damage and failure modeling of lotus-type porous material subjected to low-cycle fatigue

  J. Kramberger, K. Sterkuš, S. Glodež

  pages 142-151

• Damage Detection in Structural Health Monitoring using Hybrid Convolution Neural Network and Recurrent Neural Network

  Thanh Bui-Tien, Dung Bui-Ngoc, Hieu Nguyen-Tran, Lan Nguyen-Ngoc, Hoa Tran-Ngoc, Hung Tran-Viet

  461-470

• Damage evolution in the AlMg6 alloy during high and very high cycle fatigue

  Mikhail Bannikov, Dmitry Bilalov, Vladimir Oborin, Oleg Naimark

  383-395

• Damage initiation in brittle and ductile materials as revealed from a fractoluminescence study

  Alexandre Chmel, Igor’ Shcherbakov

  pages 162-166

• Damage mechanisms in hybrid composites: experimental characterisation and energy-based numerical analysis

  João M. Parente, L.M. Ferreira, P.N.B. Reis

  139-152

• Damage modelling in concrete subject to sulfate attack

  N. Cefis, C. Comi

  pages 222-229

• Damage propagation in a masonry arch subjected to slow cyclic and dynamic loadings

  J. Toti, V. Gattulli, Elio Sacco

  pages 166-177