Fracture and Structural Integrity e-ISSN 1971-8993 Open access
SI: Russian mechanics contributions for Structural Integrity Vol. 17, No. 63 (2023)

The Metallurgical hydrogen as an indicator and cause of damage to rolled steel: Hydrogen diagnostics of fracture

Author and affiliation details
  • Vladimir Polyanskiy Corresponding author Institute for Problems in Mechanical Engineering of the Russian Academy of Sciences, Russia vapol@mail.ru
  • Victor Loginov Institute for Problems in Mechanical Engineering of the Russian Academy of Sciences, Russia
  • Yuriy A. Yakovlev Institute for Problems in Mechanical Engineering of the Russian Academy of Sciences, Russia
  • Anatoly Polyanskiy RDC Electron and Beam Technologies, Russia
  • Vecheclav Olekov Research Institute of Bridges and Defectoscopy, Russia
  • Gregory Rostovykh Research Institute of Bridges and Defectoscopy, Russia
DOI
10.3221/IGF-ESIS.63.23
Pages
301-308
Published
Licence
CC BY 4.0
Published inVol. 17, No. 63 (2023)Go to the issue

Abstract

Fatigue tests and measurements of the volumetric distribution of metallurgical hydrogen in specimens cut from rolled I-beam 60Sh3 made of steel 10KhSND were carried out. Fatigue tests show a 20% reduction in fatigue limits compared to similar sheet material. On the fractures of the samples, there are flock-like defects in the areas of interface of the flanges of the I-beam, or the so-called zones of difficult deformation. The concentration of metallurgical hydrogen is unevenly distributed and varies from 0.17 ppm to 1.8 ppm. Large concentrations of hydrogen are observed in the zones of difficult deformation, which indicates the hydrogen nature of the metal defects observed at the fracture. The result of mechanical tests and hydrogen diagnostics is a manufacturing defect of rolled products that cannot be corrected. Hydrogen diagnostics using metallurgical hydrogen (without hydrogen charging samples) takes tens of times less time than mechanical tests, and gives an adequate result.

Keywords

Article history

  1. ReceivedUntil the next stage: 80 days
  2. RevisedUntil the next stage: 57 days
  3. AcceptedUntil the next stage: 22 days
  4. Published

About the authors

Vladimir Polyanskiy

Director

Victor Loginov

Engineer, Applied Research Laboratory 

Yuriy A. Yakovlev

Head of Applied Research Laboratory

Anatoly Polyanskiy

Director

Vecheclav Olekov

Head of testing laboratory

Gregory Rostovykh

Senior researcher

How to cite

APA

Polyanskiy, V., Loginov, V., Yakovlev, Y., Polyanskiy, A., Olekov, V., & Rostovykh, G. (2022). The Metallurgical hydrogen as an indicator and cause of damage to rolled steel: Hydrogen diagnostics of fracture. Fracture and Structural Integrity, 17(63), 301–308. https://doi.org/10.3221/IGF-ESIS.63.23

IEEE

V. Polyanskiy, V. Loginov, Y. Yakovlev, A. Polyanskiy, V. Olekov, and G. Rostovykh, “The Metallurgical hydrogen as an indicator and cause of damage to rolled steel: Hydrogen diagnostics of fracture,” Fracture and Structural Integrity, vol. 17, no. 63, pp. 301–308, 2022, doi: 10.3221/IGF-ESIS.63.23.

MLA

Polyanskiy, Vladimir, et al. “The Metallurgical hydrogen as an indicator and cause of damage to rolled steel: Hydrogen diagnostics of fracture.” Fracture and Structural Integrity, vol. 17, no. 63, 2022, pp. 301–308. https://doi.org/10.3221/IGF-ESIS.63.23.

Chicago

Polyanskiy, Vladimir, Victor Loginov, Yuriy Yakovlev, Anatoly Polyanskiy, Vecheclav Olekov, and Gregory Rostovykh. 2022. “The Metallurgical hydrogen as an indicator and cause of damage to rolled steel: Hydrogen diagnostics of fracture.” Fracture and Structural Integrity 17 (63): 301–308. https://doi.org/10.3221/IGF-ESIS.63.23.

Harvard

Polyanskiy, V., Loginov, V., Yakovlev, Y., Polyanskiy, A., Olekov, V. and Rostovykh, G. (2022) ‘The Metallurgical hydrogen as an indicator and cause of damage to rolled steel: Hydrogen diagnostics of fracture’, Fracture and Structural Integrity, 17(63), pp. 301–308. doi: 10.3221/IGF-ESIS.63.23.

Vancouver

Polyanskiy V, Loginov V, Yakovlev Y, Polyanskiy A, Olekov V, Rostovykh G. The Metallurgical hydrogen as an indicator and cause of damage to rolled steel: Hydrogen diagnostics of fracture. Fracture and Structural Integrity. 2022;17(63):301-308. doi:10.3221/IGF-ESIS.63.23

BibTeX

@article{polyanskiy2022, author = {Polyanskiy, Vladimir and Loginov, Victor and Yakovlev, Yuriy and Polyanskiy, Anatoly and Olekov, Vecheclav and Rostovykh, Gregory}, title = {The Metallurgical hydrogen as an indicator and cause of damage to rolled steel: Hydrogen diagnostics of fracture}, journal = {Fracture and Structural Integrity}, year = {2022}, volume = {17}, number = {63}, pages = {301--308}, doi = {10.3221/IGF-ESIS.63.23}, url = {https://doi.org/10.3221/IGF-ESIS.63.23}, issn = {1971-8993} }

RIS

TY - JOUR AU - Polyanskiy, Vladimir AU - Loginov, Victor AU - Yakovlev, Yuriy AU - Polyanskiy, Anatoly AU - Olekov, Vecheclav AU - Rostovykh, Gregory TI - The Metallurgical hydrogen as an indicator and cause of damage to rolled steel: Hydrogen diagnostics of fracture JO - Fracture and Structural Integrity T2 - Fracture and Structural Integrity PY - 2022 DA - 2022/12/21 VL - 17 IS - 63 SP - 301 EP - 308 DO - 10.3221/IGF-ESIS.63.23 UR - https://doi.org/10.3221/IGF-ESIS.63.23 SN - 1971-8993 ER -

Licence

Creative Commons Attribution 4.0 International

May be shared and adapted, provided appropriate credit is given. Copyright © 2022 Vladimir Polyanskiy, Victor Loginov, Yuriy A. Yakovlev, Anatoly Polyanskiy, Vecheclav Olekov, Gregory Rostovykh.

Copyright 
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.  

Open Access Statement

Fracture and Structural Integrity (F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.

F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit, providing a link to the license, and indicating if changes were made.