Fracture and Structural Integrity e-ISSN 1971-8993 Open access
Failure Analysis, Case Studies and Forensic Engineering Vol. 16, No. 61 (2022)

Fracture micrographic analysis of a carbon FML under three-point bending load

Author and affiliation details
DOI
10.3221/IGF-ESIS.61.27
Pages
410-418
Published
Licence
CC BY 4.0
Published inVol. 16, No. 61 (2022)Go to the issue

Abstract

The core of the present work concerns the analysis of the failure mode and the fracture process induced by the flexural load in Fibre Metal Laminates (FMLs). The influence of the connection layer placed between the composite ones and the metal sheets on the fracture mode was analysed. The considered FML was made of aluminium sheets interposed with carbon fibre reinforced polymer (CFRP) layers, joined with two different types of interface: by using a structural adhesive, or by relying on the bonding capacity of the prepreg resin. Then, the mechanical performances of the produced laminates were determined through the three-point bending test procedure, and the support span was varied to investigate different loading conditions. Finally, the fracture surface morphology was analysed by using both optical and scanning electron microscopes. The type of interface was found to influence the strength of the studied FML, and different fracture modes were observed, depending on the loading condition.

Keywords

Article history

  1. ReceivedUntil the next stage: 0 days
  2. AcceptedUntil the next stage: 5 days
  3. Published

How to cite

APA

Bellini, C., Di Cocco, V., Iacoviello, F., & Mocanu, L. P. (2022). Fracture micrographic analysis of a carbon FML under three-point bending load. Fracture and Structural Integrity, 16(61), 410–418. https://doi.org/10.3221/IGF-ESIS.61.27

IEEE

C. Bellini, V. Di Cocco, F. Iacoviello, and L. P. Mocanu, “Fracture micrographic analysis of a carbon FML under three-point bending load,” Fracture and Structural Integrity, vol. 16, no. 61, pp. 410–418, 2022, doi: 10.3221/IGF-ESIS.61.27.

MLA

Bellini, Costanzo, et al. “Fracture micrographic analysis of a carbon FML under three-point bending load.” Fracture and Structural Integrity, vol. 16, no. 61, 2022, pp. 410–418. https://doi.org/10.3221/IGF-ESIS.61.27.

Chicago

Bellini, Costanzo, Vittorio Di Cocco, Francesco Iacoviello, and Larisa Patricia Mocanu. 2022. “Fracture micrographic analysis of a carbon FML under three-point bending load.” Fracture and Structural Integrity 16 (61): 410–418. https://doi.org/10.3221/IGF-ESIS.61.27.

Harvard

Bellini, C., Di Cocco, V., Iacoviello, F. and Mocanu, L.P. (2022) ‘Fracture micrographic analysis of a carbon FML under three-point bending load’, Fracture and Structural Integrity, 16(61), pp. 410–418. doi: 10.3221/IGF-ESIS.61.27.

Vancouver

Bellini C, Di Cocco V, Iacoviello F, Mocanu LP. Fracture micrographic analysis of a carbon FML under three-point bending load. Fracture and Structural Integrity. 2022;16(61):410-418. doi:10.3221/IGF-ESIS.61.27

BibTeX

@article{bellini2022, author = {Bellini, Costanzo and Di Cocco, Vittorio and Iacoviello, Francesco and Mocanu, Larisa Patricia}, title = {Fracture micrographic analysis of a carbon FML under three-point bending load}, journal = {Fracture and Structural Integrity}, year = {2022}, volume = {16}, number = {61}, pages = {410--418}, doi = {10.3221/IGF-ESIS.61.27}, url = {https://doi.org/10.3221/IGF-ESIS.61.27}, issn = {1971-8993} }

RIS

TY - JOUR AU - Bellini, Costanzo AU - Di Cocco, Vittorio AU - Iacoviello, Francesco AU - Mocanu, Larisa Patricia TI - Fracture micrographic analysis of a carbon FML under three-point bending load JO - Fracture and Structural Integrity T2 - Fracture and Structural Integrity PY - 2022 DA - 2022/06/19 VL - 16 IS - 61 SP - 410 EP - 418 DO - 10.3221/IGF-ESIS.61.27 UR - https://doi.org/10.3221/IGF-ESIS.61.27 SN - 1971-8993 ER -

Licence

Creative Commons Attribution 4.0 International

May be shared and adapted, provided appropriate credit is given. Copyright © 2022 Costanzo Bellini, Vittorio Di Cocco, Francesco Iacoviello, Larisa Patricia Mocanu.

Copyright 
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.  

Open Access Statement

Fracture and Structural Integrity (F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.

F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit, providing a link to the license, and indicating if changes were made.

Similar articles

Most read articles by the same author(s)

<< < 1 2 3