Fracture and Structural Integrity e-ISSN 1971-8993 Open access
Fatigue Vol. 16, No. 59 (2022)

Crack paths in multiaxial fatigue of C45 steel specimens and correlation of lifetime with the thermal energy dissipation

Author and affiliation details
  • Daniele Rigon Corresponding author University of Padova, Department of Industrial Engineering, via Venezia 1 – 35131 Padova, Italy ORCID iD0000-0003-0315-6628 daniele.rigon@unipd.it
  • Filippo Berto Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology, Trondheim, Norway
  • Giovanni Meneghetti University of Padova, Department of Industrial Engineering, via Venezia 1 – 35131 Padova, Italy ORCID iD0000-0002-4212-2618
DOI
10.3221/IGF-ESIS.59.34
Pages
525-536
Published
Licence
CC BY 4.0
Published inVol. 16, No. 59 (2022)Go to the issue

Abstract

The work reports the observed fatigue damage of C45 steel specimens tested in a previous work under multiaxial loading conditions and its relationship with the thermal energy dissipation which has been used in the last decades to estimate the uniaxial fatigue behavior of metals. For this purpose, fatigue data relevant to thin-walled samples made of quenched and tempered C45 steel tested under completely reversed combined axial and torsional cyclic loadings with different biaxiality ratios and phase-shift angles have been analysed. The analyses of crack paths at the initiation point of failure were performed after a 50% stiffness loss that corresponded to a crack size ranging from 7 to 15 mm; afterwards, the characteristic crack paths of each loading condition were analysed by using a digital microscope to identify the orientation of the crack initiation plane. After having broken all fatigue tested specimens under static tensile loading, the fracture surfaces were inspected close to the crack initiation point using a digital microscope. Despite the stress states and fatigue damage mechanisms dependent on the load condition, the Q parameter applied to the present experimental results proved to correlate all multiaxial fatigue test results in a single fatigue scatter band.

Keywords

Article history

  1. ReceivedUntil the next stage: 17 days
  2. Revision requestedUntil the next stage: 20 days
  3. RevisedUntil the next stage: 0 days
  4. AcceptedUntil the next stage: 7 days
  5. Published

How to cite

APA

Rigon, D., Berto, F., & Meneghetti, G. (2021). Crack paths in multiaxial fatigue of C45 steel specimens and correlation of lifetime with the thermal energy dissipation. Fracture and Structural Integrity, 16(59), 525–536. https://doi.org/10.3221/IGF-ESIS.59.34

IEEE

D. Rigon, F. Berto, and G. Meneghetti, “Crack paths in multiaxial fatigue of C45 steel specimens and correlation of lifetime with the thermal energy dissipation,” Fracture and Structural Integrity, vol. 16, no. 59, pp. 525–536, 2021, doi: 10.3221/IGF-ESIS.59.34.

MLA

Rigon, Daniele, et al. “Crack paths in multiaxial fatigue of C45 steel specimens and correlation of lifetime with the thermal energy dissipation.” Fracture and Structural Integrity, vol. 16, no. 59, 2021, pp. 525–536. https://doi.org/10.3221/IGF-ESIS.59.34.

Chicago

Rigon, Daniele, Filippo Berto, and Giovanni Meneghetti. 2021. “Crack paths in multiaxial fatigue of C45 steel specimens and correlation of lifetime with the thermal energy dissipation.” Fracture and Structural Integrity 16 (59): 525–536. https://doi.org/10.3221/IGF-ESIS.59.34.

Harvard

Rigon, D., Berto, F. and Meneghetti, G. (2021) ‘Crack paths in multiaxial fatigue of C45 steel specimens and correlation of lifetime with the thermal energy dissipation’, Fracture and Structural Integrity, 16(59), pp. 525–536. doi: 10.3221/IGF-ESIS.59.34.

Vancouver

Rigon D, Berto F, Meneghetti G. Crack paths in multiaxial fatigue of C45 steel specimens and correlation of lifetime with the thermal energy dissipation. Fracture and Structural Integrity. 2021;16(59):525-536. doi:10.3221/IGF-ESIS.59.34

BibTeX

@article{rigon2021, author = {Rigon, Daniele and Berto, Filippo and Meneghetti, Giovanni}, title = {Crack paths in multiaxial fatigue of C45 steel specimens and correlation of lifetime with the thermal energy dissipation}, journal = {Fracture and Structural Integrity}, year = {2021}, volume = {16}, number = {59}, pages = {525--536}, doi = {10.3221/IGF-ESIS.59.34}, url = {https://doi.org/10.3221/IGF-ESIS.59.34}, issn = {1971-8993} }

RIS

TY - JOUR AU - Rigon, Daniele AU - Berto, Filippo AU - Meneghetti, Giovanni TI - Crack paths in multiaxial fatigue of C45 steel specimens and correlation of lifetime with the thermal energy dissipation JO - Fracture and Structural Integrity T2 - Fracture and Structural Integrity PY - 2021 DA - 2021/12/22 VL - 16 IS - 59 SP - 525 EP - 536 DO - 10.3221/IGF-ESIS.59.34 UR - https://doi.org/10.3221/IGF-ESIS.59.34 SN - 1971-8993 ER -

Licence

Creative Commons Attribution 4.0 International

May be shared and adapted, provided appropriate credit is given. Copyright © 2021 Daniele Rigon, Filippo Berto, Giovanni Meneghetti.

Copyright 
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.  

Open Access Statement

Fracture and Structural Integrity (F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.

F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit, providing a link to the license, and indicating if changes were made.

Similar articles

Most read articles by the same author(s)

<< < 1 2 3 4 > >>