Abstract
The cracking characteristics of ductile rocks were studied by similar materials with sand, barite, epoxide resin, polyamide, silicone rubber and alcohol, while the cracking characteristics of brittle rocks were investigated by similar material with sand, barite, rosin and alcohol. In this paper, to enhance the application range of the rock-like materials in the field of geotechnical engineering model tests, the values of the elastic modulus and the compressive strength of the artificial rock-like materials are changed in a wide range by adjusting the amount of cementitious materials (epoxide resin, polyamide, rosin, etc). The elastic modulus, compressive strength and cracking characteristics were obtained from the complete axial stress–strain curves of the specimens made of similar materials, which were cast using the different mixture ratios. These experimental data can provide quantitative investigation on mixture ratios of similar materials of rocks to model the geotechnical engineering. Furthermore, the effect of mixture ratios on mechanical properties and crack propagation pattern of specimens were also investigated by the specimens with pre-existing flaws under uniaxial compressive tests
Keywords
Article history
- ReceivedUntil the next stage: 0 days
- Revision requestedUntil the next stage: 7 days
- RevisedUntil the next stage: 0 days
- AcceptedUntil the next stage: 70 days
- Published
How to cite
APA
IEEE
MLA
Chicago
Harvard
Vancouver
BibTeX
RIS
Licence
May be shared and adapted, provided appropriate credit is given. Copyright © 2021 Hao Bai, Wei Du, Yundong Shou, Lichuan Chen, Filippo Berto.
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Fracture and Structural Integrity (F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit, providing a link to the license, and indicating if changes were made.
Similar articles
Most read articles by the same author(s)
- xiaoping zhou, Xiaocheng Huang, Filippo Berto, An innovative micromechanics-based three-dimensional long-term strength criterion for fracture assessment of rock materials , Fracture and Structural Integrity: Vol 12 No 44 (2018): April 2018
- Paolo Ferro, Alberto Fabrizi, Franco Bonollo, Filippo Berto, Microstructural and mechanical characterization of a stainless-steel wire mesh–reinforced Al-matrix composite: Bimatallic components for lightweight design , Fracture and Structural Integrity: Vol 15 No 55 (2021): January 2021
- Stefano Bressan, Fumio Ogawa, Takamoto Itoh, Filippo Berto, Low cycle fatigue behavior of additively manufactured Ti-6Al-4V under non-proportional and proportional loading , Fracture and Structural Integrity: Vol 13 No 48 (2019): April 2019
- Daniele Rigon, Filippo Berto, Giovanni Meneghetti, Crack paths in multiaxial fatigue of C45 steel specimens and correlation of lifetime with the thermal energy dissipation , Fracture and Structural Integrity: Vol 16 No 59 (2022): January 2022
- Paolo Zuliani, Carlo Boursier Niutta, Davide Salvatore Paolino, Filippo Berto, Andrea Tridello, Very High Cycle Fatigue (VHCF) of notched specimens: a review , Fracture and Structural Integrity: Vol 19 No 74 (2025): October 2025
- Stefano Bressan, Fumio Ogawa, Takamoto Itoh, Filippo Berto, Influence of Notch Sensitivity and Crack Initiation Site on Low Cycle Fatigue Life of Notched Components under Multiaxial Non-proportional Loading , Fracture and Structural Integrity: Vol 13 No 47 (2019): January 2019
- Luigi Viespoli, Filippo Berto, Aurelio Somà, Fatigue life assessment for a welded detail: advantages of a local energetic approach and experimental validation , Fracture and Structural Integrity: Vol 12 No 45 (2018): July 2018
- Zheng Li, Yundong Shou, Deping Guo, Filippo Berto, A coupled elastoplastic damage model for brittle rocks: elastoplastic damage model for brittle rocks , Fracture and Structural Integrity: Vol 14 No 53 (2020): July 2020
- Yi Sun, Liping Yan, Benyong Chen, Wei Song, Filippo Berto, Localized wrinkling of metal films on elastic and liquid substrates , Fracture and Structural Integrity: Vol 13 No 48 (2019): April 2019
- Luca Romanin, Alexei Vinogradov, Filippo Berto, Paolo Ferro, A novel algorithm for crack path identification based on infrared images , Fracture and Structural Integrity: Vol 13 No 48 (2019): April 2019