0000-0002-1059-715X
Abstract
The main goal of the present research is to propose an integrated methodology to address the fatigue performance of topology optimized components, produced by additive manufacturing. The main steps of the component design will be presented, specially the methods and parameters applied to the topology optimization and the post-smoothing process. The SIMP method was applied in order to obtain a lighter component and a suitable stiffness for the desired application. In addition, since residual stresses are intrinsic to every metallic additive manufacturing process, the influence of those stresses will be also analyzed. The Laser Powder Bed Fusion was numerically simulated aiming at evaluating the residual stresses the workpiece during the manufacturing process and to investigate how they could influence the fatigue behavior of the optimized component. The effect of the built orientation of the workpiece on the residual stresses at some selected potential critical points are evaluated. The final design solution presented a stiffness/volume ratio nearly 6 times higher when compared to the initial geometry. By choosing the built orientation, it is possible impact favorably in the fatigue life of the component.
Keywords
Article history
- ReceivedUntil the next stage: 26 days
- Revision requestedUntil the next stage: 19 days
- RevisedUntil the next stage: 11 days
- AcceptedUntil the next stage: 69 days
- Published
Statements
Funding
About the authors
F.K. Fiorentin
PhD Student at FEUP
B. Oliveira
MSc
J.C.R. Pereira
Post-doc researcher at INEGI
J.A.F.O. Correia
Junior PhD researcher at FEUP
Abilio M.P. de Jesus
Abílio Manuel Pinho de Jesus, born in 1973 in Oliveira de Azeméis, Portugal, is Auxiliary Professor at the Department of Mechanical Engineering of the Faculty of Engineering from the University of Porto (FEUP) since 2014, after 18 years of teaching activity at the Department of Engineering of the University of Trás-os-Montes e Alto Douro, Vila Real, Portugal. He is also research member at the Institute of Science and Innovation in Mechanical and Industrial Engineering (INEGI) and is integrated in the Associated Laboratory for Energy, Transports and Aeronautics (LAETA). He obtained the BSc (1996) and MSc (1999) degrees in Mechanical Engineering by the University of Porto and the PhD in Mechanical Engineering by the University of Trás-os-Montes e Alto Douro in 2004. He is co-author of more than 120 papers in the national and international scientific journals and more than 200 papers presented in both national and international conferences. A total of 120 documents in SCOPUS and an h-index of 16 show the consistency and visibility of the research work that has been developed in the fields of fatigue and fracture of materials and structures. The recent edition of the Structural Integrity Book series, the nomination for the ESIS TC12 and the new European Project, FASTCOLD, highlights the research excellency being performed. The manufacturing processes, and particularly machining processes, have been recently elected as a research priority; the grounds of a group in the field are being created. Process simulation, material characterization, hybrid manufacturing (additive and subtractive) and composites machining are targeted.
How to cite
APA
IEEE
MLA
Chicago
Harvard
Vancouver
BibTeX
RIS
Licence
May be shared and adapted, provided appropriate credit is given. Copyright © 2020 F.K. Fiorentin, B. Oliveira, J.C.R. Pereira, J.A.F.O. Correia, Abilio M.P. de Jesus, F. Berto.
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Fracture and Structural Integrity (F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit, providing a link to the license, and indicating if changes were made.
Similar articles
Most read articles by the same author(s)
- Paolo Ferro, Alberto Fabrizi, Franco Bonollo, Filippo Berto, Microstructural and mechanical characterization of a stainless-steel wire mesh–reinforced Al-matrix composite: Bimatallic components for lightweight design , Fracture and Structural Integrity: Vol 15 No 55 (2021): January 2021
- Stefano Bressan, Fumio Ogawa, Takamoto Itoh, Filippo Berto, Low cycle fatigue behavior of additively manufactured Ti-6Al-4V under non-proportional and proportional loading , Fracture and Structural Integrity: Vol 13 No 48 (2019): April 2019
- Daniele Rigon, Filippo Berto, Giovanni Meneghetti, Crack paths in multiaxial fatigue of C45 steel specimens and correlation of lifetime with the thermal energy dissipation , Fracture and Structural Integrity: Vol 16 No 59 (2022): January 2022
- Paolo Zuliani, Carlo Boursier Niutta, Davide Salvatore Paolino, Filippo Berto, Andrea Tridello, Very High Cycle Fatigue (VHCF) of notched specimens: a review , Fracture and Structural Integrity: Vol 19 No 74 (2025): October 2025
- Stefano Bressan, Fumio Ogawa, Takamoto Itoh, Filippo Berto, Influence of Notch Sensitivity and Crack Initiation Site on Low Cycle Fatigue Life of Notched Components under Multiaxial Non-proportional Loading , Fracture and Structural Integrity: Vol 13 No 47 (2019): January 2019
- Luigi Viespoli, Filippo Berto, Aurelio Somà, Fatigue life assessment for a welded detail: advantages of a local energetic approach and experimental validation , Fracture and Structural Integrity: Vol 12 No 45 (2018): July 2018
- Hao Bai, Wei Du, Yundong Shou, Lichuan Chen, Filippo Berto, Experimental investigation of cracking behaviors of ductile and brittle rock-like materials , Fracture and Structural Integrity: Vol 15 No 56 (2021): April 2021
- Zheng Li, Yundong Shou, Deping Guo, Filippo Berto, A coupled elastoplastic damage model for brittle rocks: elastoplastic damage model for brittle rocks , Fracture and Structural Integrity: Vol 14 No 53 (2020): July 2020
- Yi Sun, Liping Yan, Benyong Chen, Wei Song, Filippo Berto, Localized wrinkling of metal films on elastic and liquid substrates , Fracture and Structural Integrity: Vol 13 No 48 (2019): April 2019
- Luca Romanin, Alexei Vinogradov, Filippo Berto, Paolo Ferro, A novel algorithm for crack path identification based on infrared images , Fracture and Structural Integrity: Vol 13 No 48 (2019): April 2019