Fracture and Structural Integrity e-ISSN 1971-8993 Open access
SI: Crack Paths Vol. 13, No. 48 (2019)

Low cycle fatigue behavior of additively manufactured Ti-6Al-4V under non-proportional and proportional loading

Author and affiliation details
DOI
10.3221/IGF-ESIS.48.03
Pages
18-25
Published
Published inVol. 13, No. 48 (2019)Go to the issue

Abstract

Experimental tests were conducted on additive manufactured Ti-6Al-4V titanium alloy to investigate the mechanical and crack properties under multiaxial cyclic loading. Selective Laser Sintering technique (SLS) was employed to fabricate four types of cylindrical hollow specimens. The typology of each specimen is defined by the orientation of the layers and by the application of a stress-relieving heat treatment after the production process. Stress-strain cyclic curves of the materials were obtained to investigate the material cyclic plastic behavior, that resulted independent of specimen variety. Strain-controlled multiaxial low cycle fatigue tests under proportional and non-proportional loading paths were carried out on the specimens. Not heat-treated specimens exhibited a higher low cycle fatigue resistance both for proportional and non-proportional loading. Drastic initial softening was detected in the majority of the tests. Additional hardening was detected in part of non-proportional tests, which is atypical for this alloy. The mutual influence of applied load and microstructural characteristics on fatigue life are finally discussed.

Keywords

Article history

  1. ReceivedUntil the next stage: 11 days
  2. Revision requestedUntil the next stage: 2 days
  3. RevisedUntil the next stage: 3 days
  4. AcceptedUntil the next stage: 73 days
  5. Published

How to cite

APA

Bressan, S., Ogawa, F., Itoh, T., & Berto, F. (2019). Low cycle fatigue behavior of additively manufactured Ti-6Al-4V under non-proportional and proportional loading. Fracture and Structural Integrity, 13(48), 18–25. https://doi.org/10.3221/IGF-ESIS.48.03

IEEE

S. Bressan, F. Ogawa, T. Itoh, and F. Berto, “Low cycle fatigue behavior of additively manufactured Ti-6Al-4V under non-proportional and proportional loading,” Fracture and Structural Integrity, vol. 13, no. 48, pp. 18–25, 2019, doi: 10.3221/IGF-ESIS.48.03.

MLA

Bressan, Stefano, et al. “Low cycle fatigue behavior of additively manufactured Ti-6Al-4V under non-proportional and proportional loading.” Fracture and Structural Integrity, vol. 13, no. 48, 2019, pp. 18–25. https://doi.org/10.3221/IGF-ESIS.48.03.

Chicago

Bressan, Stefano, Fumio Ogawa, Takamoto Itoh, and Filippo Berto. 2019. “Low cycle fatigue behavior of additively manufactured Ti-6Al-4V under non-proportional and proportional loading.” Fracture and Structural Integrity 13 (48): 18–25. https://doi.org/10.3221/IGF-ESIS.48.03.

Harvard

Bressan, S., Ogawa, F., Itoh, T. and Berto, F. (2019) ‘Low cycle fatigue behavior of additively manufactured Ti-6Al-4V under non-proportional and proportional loading’, Fracture and Structural Integrity, 13(48), pp. 18–25. doi: 10.3221/IGF-ESIS.48.03.

Vancouver

Bressan S, Ogawa F, Itoh T, Berto F. Low cycle fatigue behavior of additively manufactured Ti-6Al-4V under non-proportional and proportional loading. Fracture and Structural Integrity. 2019;13(48):18-25. doi:10.3221/IGF-ESIS.48.03

BibTeX

@article{bressan2019, author = {Bressan, Stefano and Ogawa, Fumio and Itoh, Takamoto and Berto, Filippo}, title = {Low cycle fatigue behavior of additively manufactured Ti-6Al-4V under non-proportional and proportional loading}, journal = {Fracture and Structural Integrity}, year = {2019}, volume = {13}, number = {48}, pages = {18--25}, doi = {10.3221/IGF-ESIS.48.03}, url = {https://doi.org/10.3221/IGF-ESIS.48.03}, issn = {1971-8993} }

RIS

TY - JOUR AU - Bressan, Stefano AU - Ogawa, Fumio AU - Itoh, Takamoto AU - Berto, Filippo TI - Low cycle fatigue behavior of additively manufactured Ti-6Al-4V under non-proportional and proportional loading JO - Fracture and Structural Integrity T2 - Fracture and Structural Integrity PY - 2019 DA - 2019/02/24 VL - 13 IS - 48 SP - 18 EP - 25 DO - 10.3221/IGF-ESIS.48.03 UR - https://doi.org/10.3221/IGF-ESIS.48.03 SN - 1971-8993 ER -

Licence

Copyright © 2019 Stefano Bressan, Fumio Ogawa, Takamoto Itoh, Filippo Berto.

Copyright 
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.  

Open Access Statement

Fracture and Structural Integrity (F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.

F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit, providing a link to the license, and indicating if changes were made.

Similar articles

Most read articles by the same author(s)

<< < 1 2 3 4 > >>