Tip: use quotes for an exact phrase, e.g. "teacher education"
A criterion for the prediction of the static failure loads in tensile PMMA specimens with sharp notches is presented. The proposed criterion is based on a regularized version of the eXtended Finite Element Method (XFEM), which has been…
In the case of quasi-brittle material, there is a zone of non-linear behaving material, near the crack tip. A major part of this zone forms a socalled fracture process zone (FPZ), where mechanisms of material toughening take place. The…
This paper analyses how the microstructure of an eutectoid pearlitic steel affects its conventional mechanical properties (obtained by means of a standard tension test) and the associated micromechanisms of fracture. Results show how the…
The fracture process zone (FPZ) was investigated on unnotched and notched beams with different notch depths. Three point bending tests were realized on plain concrete under crack mouth opening displacement (CMOD) control. Crack growth was…
Cutting processes affect the material to a deeper or shallower attached-to-the-cut zone. Its microstructure, its hardness and mechanical properties are changed. Also the cutting process introduces surface roughness and residual stresses.…
An analysis focused on capturing the phenomenon of quasibrittle fracture is presented. Selected parameters relevant for quasi-brittle fracture are evaluated and an assessment of their dependence on the size and shape of the test specimen…
The concept of the average stress has been employed to propose the maximum average tangential stress (MATS) criterion for predicting the direction of fracture angle. This criterion states that a crack grows when the maximum average…
In oil drilling, one of the most complicated problems is borehole stability of shale. Based on the theory of continuum damage mechanics, a modified Mohr-Coulomb failure criterion according to plastic damage evolution and the seepage-stress…
For wedge splitting test specimens, the stress and displacement fields both in the vicinity and also in larger distance from the crack tip are investigated by means of numerical methods. Several variants of boundary conditions were…
Fields of stress, strain rate and process zone of a mode I creep crack growth are analyzed by employing damage evolution equations. Damage models for fracture of process zone represented by stress based formulation. Two expressions are…
Based on the variation principle of Jourdan was developed a mathematical model of the process of widening freely in hot rolling of thin sheet metal. The principle applies to rigid-plastic materials and for the cinematically admissible area…
The fracture behavior of quasi-brittle materials such as concrete is characterized by the presence of a fracture process zone (FPZ) that precedes the main crack. Within this zone, various mechanisms, including the formation of microcracks…
Simulating the concrete fracture unlike other elastic and brittle materials quite different due to its quasibrittleness. The present research focussed on assess softening behavior by varying different fractions of aggregates and cement…
Fatigue takes a place more and more important in the design of structures, it remains a key point in the mechanical dimensioning of structures. The Friction Stir Welding (FSW) process is regarded today as the most promising alternative to…
Fracture behavior of adhesive joints is an important topic in structural design of new structural elements or in retrofitting of existing ones. The mechanical models available in literature capable of predicting the failure mode of these…
The aim of this work was to evaluate the influence of temperature on the mechanical behavior of an amorphous polymer, namely acrylonitrile butadiene styrene (ABS), based on a series of uniaxial tensile tests on smooth specimens at…
The present study is concerned with formulation of a model for the creep–fatigue crack growth rate prediction on the base of fracture damage zone concepts. It is supposed that crack growth rate can be determined by integration of damage…
The stress, strain rate and process zone with respect to the creep-crack growth are analyzed by employing damage-evolution equations. The damage models for the fracture of the process zone are represented using a stress and ductility based…
In fracture mechanics (domain of cracked environments), it is concerned to forecast the behavior of the structures until their ruin. Friction Stir Welding (FSW) is a new process for solid-state joining, it can weld high strength aluminum…
The aim of this study was to investigate the effect of thickness of energy director (EDs) and ultrasonic welding (USW) process parameters on structure formation and interlaminar shear strength (LSS) values of lap-joints of composite…
The aim of this work is to investigate stress gradient effects on the fatigue life estimation of notched Al 7050-T7451 specimens under combined torsion and push-pull loading conditions. Initially, simple push-pull and torsion fatigue tests…
Some numerical studies of crack propagation are based on using constitutive models that account for damage evolution in the material. When a critical damage value has been reached in a material point, it is natural to assume that this…
Looking at the long-time behaviour of a dam, it is necessary to assume that the water can penetrate a possible crack washing away some components of the concrete. This type of corrosion reduces the tensile strength and fracture energy of…
An inhomogeneous distribution of non-metallic inclusions can result from the steel casting process. The aim of the present study was to investigate the damaging effect of an inhomogeneous distribution of nonmetallic inclusions on the crack…
When the width of cracked nanocomponents made of brittle or quasi-brittle materials is less than approximately , the size of the - dominance zone becomes smaller than and comparable to the fracture process zone ( ). The fracture process…
In this paper the process of dynamic indentation, causing deformation and fracture of alumina ceramics, is investigated. The dynamic indentation experiments were carried out on the original setup based on the split Hopkinson bar technique.…
Performance of Friction Stir Welding (FSW) as a solid-state process is approved in several engineering applications, especially aluminum industries. Identification of mechanical behavior of the associated welded zone is necessary due to…
Concrete is a porous material containing aggregate of different sizes, hardened cement matrix with air pores, microcracks and water. Concrete internal structure is different from that of other engineering materials. Furthermore concrete is…
Dissimilar friction stir welding joints are widely employed in the industrial field due to the excellent microstructural and mechanical properties of the resulting joints. Nevertheless, to further enhance the weld properties, the addition…
Titanium and Titanium Alloys can be welded by gas tungsten arc, gas metal arc, plasma arc and electron beam welding processes. Titanium material is a reactive metal and is sensitive to embrittlement by oxygen, nitrogen, and hydrogen gas…
A quasi-static approach for an interface damage model, incorporating Rayleigh damping for viscoelastic carbon fiber reinforced polymer composites, is introduced. The interface traction-relative displacement behavior is modeled using a thin…
Some numerical studies of crack propagation are based on using constitutive models that account for damage evolution in the material. When a critical damage value has been reached in a material point, it is natural to assume that this…
The present work focuses on the Tribological properties and corrosion behavior evaluation of sintered CoCrMo alloy. The CoCrMo alloy was elaborated by Powder metallurgy process at various sintering temperatures (1200°C, 1250°C and 1300°C).…
The work is devoted to the experimental study of heat dissipation process caused by fatigue crack propagation. To investigate a spatial and time temperature evolution at the crack tip set of experiments was carried out using specimens with…
The indentation response of a pseudoelastic nickel-titanium based shape memory alloy (SMA) has been analyzed. Indentation tests have been carried out at room temperature using a spherical diamond tip and indentation loads in the range…
In this study, we present a new implementation of the phase field fracture approach in the finite element code ANSYS and its numerical background. The framework is general, and is supported by addressing several classical 2D boundary value…
In the present paper, mathematical models are proposed in order to analyze the strength of pinloaded lugs with semi-elliptical crack and through-the-thickness crack. The crack growth investigation of considered crack configurations tackles…
We propose a method of construction of non homogeneous solutions to the problem of traction ofa bar made of an elastic-damaging material whose softening behavior is regularized by a gradient damage model.We show that, for sufficiently long…
This paper is concerned with the fracture of composite materials containing stress concentration features such as notches and holes. In particular, it addresses the question of the use of the Theory of Critical Distances (TCD) – a method…
