Tip: use quotes for an exact phrase, e.g. "teacher education"
The aim of the paper was investigation crack initiation and fracture features developed during compression of Fe-based bulk metallic glass (BMG). These Fe-based BMG has received great attention as a new class of structural material due to…
The current energy policy envisages extended lifetime for the current nuclear power plants (GEN II NPP). This policy imposes a large research effort to understand the ageing of power plant components. In this goal, it is necessary to…
In this study, to investigate and understand the nature of fracture behavior properly under in-plane mixed mode (Mode-I/II) loading, three-dimensional fracture analyses and experiments of compact tension shear (CTS) specimen are performed…
In this paper, the macro and micro-mechanical fracture behavior was studied for aluminum (Al6061) alloy matrix, reinforced with various proportions of TiC particles such as 3wt%, 5wt% and 7wt%. The Al6061-TiC metal matrix composites were…
In this study, finite element modeling and experimental studies on a mode-I/III specimen similar to the compact tension specimen are presented. By using bolts, the specimen is attached to two loading apparatus that allow different levels…
The size effect significantly influences the structural design of concrete elements, particularly when applying fracture mechanics principles. As structural dimensions increase, a significant outcome of the size effect is the decline in…
Hexagonal boron nitride (hBN) and molybdenum disulfide (MoS2) fillers of 2 to 8 wt.% influence on toughness, microhardness and thermal stability of carbon fabric-reinforced epoxy composite (CFREC) reported. Mode-I, mixed-mode I/II…
In the past several numerical studies have addressed the ductile mode of fracture propagation. However, the brittle mode of pipeline failure has not received as much attention yet. The main objective of this study is to predict brittle…
The presented work introduces a numerical parametric study on the crack propagation direction under mixed-mode conditions (mode I + II). It is conducted for the geometry of an eccentric asymmetric fourpoint bending of a single edge notched…
In this study, an efficient computational method for modeling the transition from transgranular to intergranular fracture mechanisms based on phase field fracture theory is discussed. Structural heterogeneity of the material is modeled on…
In the field of composite materials, extensive research has been undertaken on aluminum-graphite composites. However, a research gap has been identified regarding the specific influence of nano-sized graphite particles on their fracture…
The primary objective of this manuscript is studying the effect of T-stress term (T) on the crack propagation angle (CPA) and fracture toughness of in-plane mixed mode loading by utilizing a generalized form of minimum strain energy…
Statistical Fracture Mechanics, formalism of few natural ideas is applied to simulation of cracktrajectories in brittle material. The “diffusion approximation” of the crack diffusion model represents cracktrajectories as a one-dimensional…
In the literature, there are many criteria of multiaxial fatigue. They are based on various assumptions and parameters describing the process of fatigue. Among them, there is a special group of criteria based on the concept of critical…
Axles and shafts are of prime importance concerning safety in the transportation industry and railway in particular. Design rules for axles and shafts are mainly based on endurance curves for the material used according to the established…
In the current work 17-4PH Stainless Steel is deposited using SLM process. It is widely used to build structural parts appropriate for automotive, medical, and aerospace applications. The 17-4 PH SS samples were deposited using technical…
Some numerical studies of crack propagation are based on using constitutive models that account for damage evolution in the material. When a critical damage value has been reached in a material point, it is natural to assume that this…
Finite Fracture Mechanics and Cohesive Crack Model can effectively predict the strength of plain, cracked or notched structural components, overcoming the classical drawbacks of Linear Elastic Fracture Mechanics. Aim of the present work is…
The paper studies the adhesive strength of aluminum alloy specimens bonded with the use of an epoxy adhesive, under the tensile-shear stress state, depending on the testing temperature. Tension of modified Arcan specimens with load angles…
In recent times, the use of aluminum alloy-based Hybrid Metal Matrix Composites (HMMCs) is being increased in aerospace and automotive applications. HMMCs compensate for the low desirable properties of each filler used. However, the…
The work is devoted to the study of the Zr-1Nb alloy in coarse-grained and ultrafine-grained states under laser-induced shock-wave loading. This material is of interest due to the application for the manufacture of shells for fuel elements…
In this paper, the attention is paid to investigation of the importance of the interfacial transition zone (ITZ) in selected fine-grained cement-based composites for the global fracture behaviour. This is a region of cement paste around…
History of studies of fracture is inherently intermingled with the history of technology developments. In the beginning very little was written about. We must credit Leonardo and Galileo as the first ones that wrote about the problem and…
This work is devoted to the development of an experimental method for studying the energy balance during cyclic deformation and fracture. The studies were conducted on 304 stainless steel AISE and titanium alloy OT4-0 samples. The…
Rebar corrosion significantly affects the overall performance and the service life of reinforced concrete (RC) structures due to the reduction in the bond strength between concrete and rebar, leading to the delamination of the concrete…
Steel-concrete joints are often made by welded shear studs. However, this connection reduces the fatigue strength, especially in situations where locally concentrated loads occur with a large number of load cycles e.g. in bridge decks. In…
The paper studies the processes of deformation and fracture in nanocomposites. The study was curry out by the method of mathematical modeling. The behavior of the nanosystem was described by the molecular dynamics apparatus. A modified…
Reinforced concrete structures may need repair in order to ensure the designed durability. Such necessity vary in cause and effect, but the structural diagnosis serves as the basis for adopting intervention measures. The assessment of the…
Our research described in this paper focused on fabricating and characterising polylactic acid (PLA) composites reinforced with randomly dispersed boron nitride nanoplatelets (BNNP). The integrated experimental analysis with the Finite…
The energy dissipation in metals in the process of irreversible deformation leads to intensive heat generation in the areas in the strain localization zones. This work is devoted to the measuring the power of heat sources by means of the…
The role of some geometrical characteristics of the notches machined in circular discs, in order to determine the mode-I fracture toughness of brittle materials, is discussed. The study is implemented both analytically and numerically.…
This paper deals with the fatigue assessment of cast steel defects in terms of macroscopic shrinkage porosity. Within preliminary studies, a generalized Kitagawa diagram GKD was established by numerical analyses of V-notched specimens with…
This study investigates jute fibre reinforced epoxy composites fabricated using a controlled vacuum bag moulding process, with emphasis on establishing reliable structure property relationships relevant to sustainable engineering…
Some numerical studies of crack propagation are based on using constitutive models that account for damage evolution in the material. When a critical damage value has been reached in a material point, it is natural to assume that this…
The Compact Tension Shear (CTS) specimen is used to study fracture and fatigue under mixed mode I/II loading conditions. Existing K solution was developed for fracture studies and it does not consider the effect of crack deflection. The…
The use of elastomers has become increasingly important in a variety of industries, including automotive, medical, and food packaging. The adaptability of elastomers to different mechanical stresses has made them a popular choice for these…
Presently, Functionally Graded Materials (FGMs) are extensively utilised in several industrial sectors, and the modelling of their mechanical behaviour is consistently advancing. Most studies investigate the impact of layers on the…
The paper details the studies carried out on a dual-size particulate composite prepared by stir casting using A 356 aluminum alloy and B4C powders. Three composite compositions, viz., A356 plus 2% B4C (44µm size and 105µm size in 1:1…
New biomedical supportive and lightweight structures require the creation of sustainable polymer composites of high strength and wear resistance. This research explores the use of alkali-treated pineapple leaf fiber (PALF) reinforced epoxy…
The analysis of reinforced concrete structures can be performed by means of experiments or numerical studies. The first way is usually quite expensive, so the second one sometimes is a good option to understand the physical behaviour of…
In recent years, the use of natural fiber composites to provide a possible replacement for synthetic fiber composites for practical applications has been the subject of several studies. This study deals with the fabrication and…
A viable approach to solve inverse problems in elasticity is proposed. It is based on regression algorithms to estimate materials and/or loading parameters by fitting the experimentally-evaluated displacement field to representative…
History of studies of fracture is inherently intermingled with the history of technology developments. In the beginning very little was written about. We must credit Leonardo and Galileo as the first ones that wrote about the problem and…
Mounting stiffness has an important impact on a system’s structural dynamics and also on the durability of many structures. Mounts with tunable stiffness allow adapting a system’s structural dynamic behavior. Furthermore, they can be used…
This work is based on the application of probabilistic fracture mechanics (MRP) models to predict the reliability of pressure pipelines in nuclear power reactors. The simulation of cracking of stainless steel piping under the conditions of…
In the current studies an investigations were made to know the effect of 63 micron sized B4C particles addition on the mechanical and wear behavior of aerospace alloy Al2618 metal composites. Al2618 alloy with different weight percentages…
