Linear and Nonlinear Fracture Mechanics

All Items

• Improvement of crack tip position estimation in DIC images by image processing methods

  Najat Zekriti, Fatima Majid, Hachimi Taoufik, Yassine Tounsi, Rajaa Rhanim, Ibrahim Mrani, Hassan Rhanim

  61-71

• Influence of control parameters on the crack paths in the aluminum alloy 2024 under bending

  E. Marcisz, D. Rozumek, Z. Marciniak

• Influence of crack offset distance on the interaction of multiple cracks on the same side in a rectangular plate

  Neeraj Bisht, P. C. Gope, Kuldeep Panwar

  pages 1-12

• Influence of different sizes of concrete and roller compacted concrete on double-K fracture parameters

  Liu Chunjiang, Zhang Huabo, Lv Ninghua

  pages 500-508

• Investigating the contribution of geometrical parameters and immersion time on fracture toughness of jute fabric composites using statistical techniques

  Dr. Bharath K N, G. B. Manjunatha

  14-24

• Investigation of stress intensity factor for internal cracks in FG cylinders under static and dynamic loading

  Mahmoud Shariati, Masoud Mahdizadeh Rokhi, Hassan Rayegan

  Pages 166-180

• Is notch sensitivity a stress analysis problem?

  Jaime Tupiassú Pinho de Castro, Marco Antonio Meggiolaro

  Pages 79-86

• Limit load based evaluation of plastic η factor for C(T) specimen with a mismatched weld

  R Nikhil, S A Krishnan, G Sasikala, A Moitra

  523-529

• Local approaches for the fracture assessment of notched components: the research work developed by Professor Paolo Lazzarin

  F. Berto

• Mechanical and fracture properties of particleboard

  Liviu Marsavina, Ion Octavian POP, Emanoil LINUL

  266-276

• Mid-thickness studies of the stress intensity factor in the bulk of bainitic steel

  P. Lopez-Crespo, J. Vazquez-Peralta, C. Simpson, T. Buslaps, P. J. Withers

  Pages 203-210

• Mode I Stress Intensity Factors for triangular corner crack nearby intersecting of cylindrical holes

  E. Salvati, P. Livieri, R. Tovo

  Pages 80-91

• Modeling of edge cracks interaction

  V. Petrova, S. Schmauder, A. Shashkin

  Pages 8-26

• Modeling of the transition from transgranular to intergranular fracture at elevated temperatures in EI698 nickel alloy

  Andrey Tumanov

  20-30

• Modelling of crack propagation in miniaturized and normal SENB specimens based on local failure criterion

  Bernadett Spisak, Zoltán Bézi, Réka Erdei, Szabolcs Szávai

  296-309

• Modelling of interfacial transition zone effect on resistance to crack propagation in fine-grained cement-based composites

  H. Simonova, M. Vyhlidal, B. Kucharczykova, P. Bayer, Z. Kersner, L. Malikova, J. Klusak

  Pages 211-219

• Modelling of size and shape of damage zone in quasi-brittle notched specimens – analytical approach based on fracture-mechanical evaluation of loading curves

  J. Klon, V. Veselý

  Pages 17-28

• Modelling probabilistic fatigue crack propagation rates for a mild structural steel

  J.A.F.O. Correia, A.M.P. de Jesus, A. Fernández-Canteli

  pages 80-96

• Modified compact tension specimen for experiments on cement based materials: comparison of calibration curves from 2D and 3D numerical solutions

  S. Seitl, V. Viszlay

  Pages 118-128

• Multi-parameter approximation of stress field in a cracked specimen using purpose-built Java applications

  V. Veselý, J. Sobek, D. Tesa?, P. Frantík, T. Pail, S. Seitl

  pages 120-133

• Multi-parameter crack tip stress state description for estimation of fracture process zone extent in silicate composite WST specimens

  Václav Veselý, Jakub Sobek, Lucie Šestáková, Petr Frantík, Stanislav Seitl

  Pages 69-78

• Multiple and non-planar crack propagation analyses in thin structures using FCPAS

  H. Dündar, A. O. Ayhan

  pages 360-367

• Multiple crack propagation by DBEM in a riveted butt-joint: a simplified bidimensional approach

  R. Citarella

  Pages 160-167

• Novel weight functions and stress intensity factors for quarterelliptical cracks in lug attachments

  S. Akbari, S. M. Nabavi, H. Moayeri

  39-53

• Numerical analysis of bonded composite patch efficiency in the case of lateral U and V-notched aluminium panels

  Mohammed A. Bouchelarm, Abdelkader Boulenouar, Meriem Chafi

  62-72

• Numerical analysis of the influence of liquid on propagation of a rolling contact fatigue crack

  Miroslaw Olzak, Janusz Piechna, Pawel Pyrzanowski

  Pages 46-55

• Numerical assessment of the seismic vulnerability of the historical earthen remains of the Mansourah enclosure (Tlemcen, Algeria): influence of geometry and identification of critical damage zones

  Walid Hanini, Nadir Boumechra

  183-211

• Numerical Comparison of Cruciform weld and Butt weld simulation and a Study of Fracture Mechanics on Two Types of Welds

  Benattou Bouchouicha, Malika Tirenifi, El Bahri Ould Chikh, Ahmed Bensari

  357-369

• Numerical investigation on strengthening steel beams with web openings using GFRP

  Hamda Guedaoura, Yazid Hadidane, Mohammed J Altaee

  26-53

• Numerical Investigation on Stress Intensity Factor and J Integral in Friction Stir Welded Joint through XFEM method

  Imane imane_elmeguenni Elmeguenni, Mohamed Mazari

  54-64

• Numerical modelling of reinforced concrete beams with fracture-plastic material

  O. Sucharda, J. Brozovsky

  pages 375-382

• Numerical Simulation of a Steel Weld Joint and Fracture Mechanics Study of a Compact Tension Specimen for Zones of Weld Joint

  BENSARI AHMED, Ould Chikh El Bahri, Bouchouicha Benattou, Tirenifi Malika

  17-29

• Numerical simulation of early-age shrinkage effects on RC member deflections and cracking development

  P. Bernardi, R. Cerioni, E. Michelini, A. Sirico

  15-21

• Numerical study and pilot evaluation of experimental data measured on specimen loaded by bending and wedge splitting forces

  S. Seitl, R. Diego Liedo

  Pages 100-109

• Numerical study of crack path by MMCG specimen using M integral

  S. El Kabir, R. Moutou Pitti, N. Recho, Y. Lapusta, F. Dubois

  pages 64-73

• Numerical study of the plasticity effect on the behavior of short steel columns filled with concrete loaded axially

  Yousria Boulmaali-Hacene Chaouche, Nadia Kouider, Kamel Djeghaba, Bachir Kebaili

  91-106

• On numerical integration for effective stress assessment at notches

  Enrico Maggiolini, Paolo Livieri, Roberto Tovo

  Pages 117-123

• On short cracks that depart from elastoplastic notch tips

  Verônica Miquelin Machado, Jaime Tupiassú Pinho de Castro, Marco Antonio Meggiolaro

  Pages 236-244

• On the relationship between crack initiation angle and loading equivalent angle for asymmetric Three-Point Bend Specimens under mixed-mode I/II loading based on GMPZR criterion

  Mujebur Rehaman, Manjunath Patel Gowdru Chandrashekarappa, Mohan T R, Shashidhar K Kudari, Sharanaprabhu C M

  45-55

• On the stress investigation at the edges of the fixed elastic semi-strip

  N. Vaysfeld, O. Kryvyi, Z. Zhuravlova

  Pages 1-11

• On the use of length scale parameters to assess the static strength of notched 3D-printed PLA

  Adnan A. Ahmed, Luca Susmel

  Pages 252-259

• On the use of the Theory of Critical Distances to estimate the dynamic strength of notched 6063-T5 aluminium alloy

  T. Yin, A. Tyas, O. Plekhov, A. Terekhina, L. Susmel

  pages 220-225

• Over-deterministic method: The influence of rounding numbers on the accuracy of the values of Williams’ expansion terms

  Vladimir Ruzicka, Lucie Malikova, Stanislav Seitl

  Pages 128-135

• Parametric study of the deformation of transversely isotropic discs under diametral compression

  Christos F. Markides, Stavros K. Kourkoulis

  Pages 396-411

• Photoelastic stress analysis assisted evaluation of fracture toughness in hydrothermally aged epoxies

  G. Pitarresi, A. Toscano, M. Scafidi, M. Di Filippo, S. Alessi, G. Spadaro

  pages 127-137

• Pilot evaluation of a fracture process zone in a modified compact tension specimen by X-ray tomography

  Jiri Klon, Stanislav Seitl, Hana Simonova, Zbynek Kersner, Ivana Kumpova, Daniel Vavrik

  Pages 161-169

• Plastic stress intensity factor behavior at small and large scale yielding

  Alexander Zakharov, Valery Shlyannikov, Anastasia Tartygasheva

  223-235

• Plastic zone evolution near a crack tip and its role in environmentally assisted cracking

  Jesús Toribio, Viktor Kharin

  Pages 124-129

• Predictive Modelling of Creep Crack Initiation and Growth using Extended Finite Element Method (XFEM)

  Meor Iqram Meor Ahmad, Mohd Anas Mohd Sabri, Mohd Faizal Mat Tahir, Nur Azam Abdullah

  119-129

• Pressure vessels design methods using the codes, fracture mechanics and multiaxial fatigue

  Fatima Majid, Jilali Nattaj, Mohamed Elghorba

  Pages 273-280