Abstract
In the last years, the attention to environmental topics led a new approach solution in classical protection techniques, introducing innovative way oriented to optimize different coating properties. Hot-dip galvanizing is a classical process aimed to generate coatings on iron-based surfaces, used unchanged since 200 years: some chemical elements are added in the bath with different aims (e.g., Pb is really important for its fluidizing properties, sometimes replaced by Sn) but sometimes these elements are dangerous for human health (e.g. … Pb!).
In this work, the influence of dipping time and coatings chemical compositions on damaging micromechanisms was investigated considering different Sn and Ti contents. Main damaging micromechanisms in hot dip zinc coated ipersandelin steel specimens were investigated by means of bending tests. Longitudinal sections of bended specimens were observed by means of a LOM (Light Optical Microscope): main damage micromechanisms were identified as longitudinal and radial cracks.
In this work, the influence of dipping time and coatings chemical compositions on damaging micromechanisms was investigated considering different Sn and Ti contents. Main damaging micromechanisms in hot dip zinc coated ipersandelin steel specimens were investigated by means of bending tests. Longitudinal sections of bended specimens were observed by means of a LOM (Light Optical Microscope): main damage micromechanisms were identified as longitudinal and radial cracks.
Article history
- ReceivedUntil the next stage: 0 days
- Accepted
How to cite
APA
Di Cocco, V., & Zortea, L. (2010). Influence of dipping time on cracking during bending of hot dip galvanized coatings with Sn and Ti contents. Fracture and Structural Integrity, 4(14), pages 52–63. https://doi.org/10.3221/IGF-ESIS.14.06
IEEE
V. Di Cocco and L. Zortea, “Influence of dipping time on cracking during bending of hot dip galvanized coatings with Sn and Ti contents,” Fracture and Structural Integrity, vol. 4, no. 14, pp. pages 52–63, 2010, doi: 10.3221/IGF-ESIS.14.06.
MLA
Di Cocco, V., and L. Zortea. “Influence of dipping time on cracking during bending of hot dip galvanized coatings with Sn and Ti contents.” Fracture and Structural Integrity, vol. 4, no. 14, 2010, pp. pages 52–63. https://doi.org/10.3221/IGF-ESIS.14.06.
Chicago
Di Cocco, V., and L. Zortea. 2010. “Influence of dipping time on cracking during bending of hot dip galvanized coatings with Sn and Ti contents.” Fracture and Structural Integrity 4 (14): pages 52–63. https://doi.org/10.3221/IGF-ESIS.14.06.
Harvard
Di Cocco, V. and Zortea, L. (2010) ‘Influence of dipping time on cracking during bending of hot dip galvanized coatings with Sn and Ti contents’, Fracture and Structural Integrity, 4(14), pp. pages 52–63. doi: 10.3221/IGF-ESIS.14.06.
Vancouver
Di Cocco V, Zortea L. Influence of dipping time on cracking during bending of hot dip galvanized coatings with Sn and Ti contents. Fracture and Structural Integrity. 2010;4(14):pages 52-63. doi:10.3221/IGF-ESIS.14.06
BibTeX
@article{dicocco2010,
author = {Di Cocco, V. and Zortea, L.},
title = {Influence of dipping time on cracking during bending of hot dip galvanized coatings with Sn and Ti contents},
journal = {Fracture and Structural Integrity},
year = {2010},
volume = {4},
number = {14},
pages = {pages 52--63},
doi = {10.3221/IGF-ESIS.14.06},
url = {https://doi.org/10.3221/IGF-ESIS.14.06},
issn = {1971-8993}
}
RIS
TY - JOUR
AU - Di Cocco, V.
AU - Zortea, L.
TI - Influence of dipping time on cracking during bending of hot dip galvanized coatings with Sn and Ti contents
JO - Fracture and Structural Integrity
T2 - Fracture and Structural Integrity
PY - 2010
VL - 4
IS - 14
SP - pages 52
EP - 63
DO - 10.3221/IGF-ESIS.14.06
UR - https://doi.org/10.3221/IGF-ESIS.14.06
SN - 1971-8993
ER -
Licence
Copyright © 2014 Frattura ed Integrità Strutturale.
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Fracture and Structural Integrity (F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit, providing a link to the license, and indicating if changes were made.
Similar articles
Most read articles by the same author(s)
- V. Di Cocco, F. Iacoviello, S. Natali, V. Volpe, Fatigue crack behavior on a Cu-Zn-Al SMA , Fracture and Structural Integrity: Vol 8 No 30 (2014): October 2014
- F. Iacoviello, V. Di Cocco, A. Rossi, M. Cavallini, Pearlitic ductile cast iron: damaging micromechanisms at crack tip , Fracture and Structural Integrity: Vol 7 No 25 (2013): July 2013
- F. R. Renzetti, L. Zortea, Use of a gray level co-occurrence matrix to characterize duplex stainless steel phases microstructure , Fracture and Structural Integrity: Vol 5 No 16 (2011): April 2011
- V. Di Cocco, C. Maletta, S. Natali, Structural transitions in a NiTi alloy: a multistage loading-unload cycle , Fracture and Structural Integrity: Vol 5 No 18 (2011): October 2011
- V. Di Cocco, Sn and Ti influences on intermetallic phases damage in hot dip galvanizing , Fracture and Structural Integrity: Vol 6 No 22 (2012): October 2012
- A. De Santis, D. Iacoviello, V. Di Cocco, O. Di Bartolomeo, Un approccio innovativo per l'analisi quantitativa delle superfici di frattura a fatica nelle ghise sferoidali mediante elaborazione di immagini. , Fracture and Structural Integrity: Vol 2 No 5 (2008): July 2008