Fracture and Structural Integrity e-ISSN 1971-8993 Open access
SI: IGF27 - 27th International Conference on Fracture and Structural Integrity Vol. 17, No. 65 (2023)

High carbon steel/Inconel 718 bimetallic parts produced via Fused Filament Fabrication and Sintering

Author and affiliation details
DOI
10.3221/IGF-ESIS.65.16
Pages
246-256
Published
Licence
CC BY 4.0
Published inVol. 17, No. 65 (2023)Go to the issue

Abstract

The possibility of producing high carbon steel/Inconel 718 bimetallic parts via Fused Filament Fabrication and Sintering is explored. Compatibility of the two alloys with particular attention to elements interdiffusion through the interface as well as the effect of the deposition strategy were analyzed. Microstructural features, relative density and parts shrinkage were investigated, as well. Although first-tentative process parameters values were not sufficient to reach an acceptable material densification, a good bonding between Inconel 718 and carbon steel was observed, suggesting the potential to obtain sound bimetallic parts with a great range of material properties. Due to a difference in densification kinetics, sintering temperature was revealed to be the most critical process parameter to optimize to minimize porosity.

Keywords

Article history

  1. ReceivedUntil the next stage: 1 day
  2. AcceptedUntil the next stage: 12 days
  3. Published

How to cite

APA

Ferro, P., Fabrizi, A., Bonollo, F., Elsayed, H., Berto, F., & Savio, G. (2023). High carbon steel/Inconel 718 bimetallic parts produced via Fused Filament Fabrication and Sintering. Fracture and Structural Integrity, 17(65), 246–256. https://doi.org/10.3221/IGF-ESIS.65.16

IEEE

P. Ferro, A. Fabrizi, F. Bonollo, H. Elsayed, F. Berto, and G. Savio, “High carbon steel/Inconel 718 bimetallic parts produced via Fused Filament Fabrication and Sintering,” Fracture and Structural Integrity, vol. 17, no. 65, pp. 246–256, 2023, doi: 10.3221/IGF-ESIS.65.16.

MLA

Ferro, Paolo, et al. “High carbon steel/Inconel 718 bimetallic parts produced via Fused Filament Fabrication and Sintering.” Fracture and Structural Integrity, vol. 17, no. 65, 2023, pp. 246–256. https://doi.org/10.3221/IGF-ESIS.65.16.

Chicago

Ferro, Paolo, Alberto Fabrizi, Franco Bonollo, H.S.A. Elsayed, Filippo Berto, and Gianpaolo Savio. 2023. “High carbon steel/Inconel 718 bimetallic parts produced via Fused Filament Fabrication and Sintering.” Fracture and Structural Integrity 17 (65): 246–256. https://doi.org/10.3221/IGF-ESIS.65.16.

Harvard

Ferro, P., Fabrizi, A., Bonollo, F., Elsayed, H., Berto, F. and Savio, G. (2023) ‘High carbon steel/Inconel 718 bimetallic parts produced via Fused Filament Fabrication and Sintering’, Fracture and Structural Integrity, 17(65), pp. 246–256. doi: 10.3221/IGF-ESIS.65.16.

Vancouver

Ferro P, Fabrizi A, Bonollo F, Elsayed H, Berto F, Savio G. High carbon steel/Inconel 718 bimetallic parts produced via Fused Filament Fabrication and Sintering. Fracture and Structural Integrity. 2023;17(65):246-256. doi:10.3221/IGF-ESIS.65.16

BibTeX

@article{ferro2023, author = {Ferro, Paolo and Fabrizi, Alberto and Bonollo, Franco and Elsayed, H.S.A. and Berto, Filippo and Savio, Gianpaolo}, title = {High carbon steel/Inconel 718 bimetallic parts produced via Fused Filament Fabrication and Sintering}, journal = {Fracture and Structural Integrity}, year = {2023}, volume = {17}, number = {65}, pages = {246--256}, doi = {10.3221/IGF-ESIS.65.16}, url = {https://doi.org/10.3221/IGF-ESIS.65.16}, issn = {1971-8993} }

RIS

TY - JOUR AU - Ferro, Paolo AU - Fabrizi, Alberto AU - Bonollo, Franco AU - Elsayed, H.S.A. AU - Berto, Filippo AU - Savio, Gianpaolo TI - High carbon steel/Inconel 718 bimetallic parts produced via Fused Filament Fabrication and Sintering JO - Fracture and Structural Integrity T2 - Fracture and Structural Integrity PY - 2023 DA - 2023/06/22 VL - 17 IS - 65 SP - 246 EP - 256 DO - 10.3221/IGF-ESIS.65.16 UR - https://doi.org/10.3221/IGF-ESIS.65.16 SN - 1971-8993 ER -

Licence

Creative Commons Attribution 4.0 International

May be shared and adapted, provided appropriate credit is given. Copyright © 2023 Paolo Ferro, Alberto Fabrizi, Franco Bonollo, H.S.A. Elsayed, Filippo Berto, Gianpaolo Savio.

Copyright 
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.  

Open Access Statement

Fracture and Structural Integrity (F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.

F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit, providing a link to the license, and indicating if changes were made.

Similar articles

Most read articles by the same author(s)

1 2 3 4 > >>