Fracture and Structural Integrity e-ISSN 1971-8993 Open access
Advanced Manufacturing and Processing Vol. 15, No. 55 (2021)

Microstructural and mechanical characterization of a stainless-steel wire mesh–reinforced Al-matrix composite: Bimatallic components for lightweight design

Author and affiliation details
  • Paolo Ferro Corresponding author University of Padova, Italy paolo.ferro@unipd.it
  • Alberto Fabrizi University of Padova, Italy
  • Franco Bonollo University of Padova, Italy
  • Filippo Berto Norwegian University of Science and Technology - NTNU, Norway
DOI
10.3221/IGF-ESIS.55.22
Pages
289-301
Published
Licence
CC BY 4.0
Published inVol. 15, No. 55 (2021)Go to the issue

Abstract

The microstructure and mechanical properties of stainless-steel AISI 304 wire mesh–reinforced AlSi9Cu-matrix composite specimens obtained by gravity casting were investigated. Optical and scanning electron microscope analyses were carried out on samples in both as-cast and solution heat treated conditions. The obtained results showed the absence of intermetallic phases at the insert/Al-matrix interface but even a significant fraction of lack-of-filling defects as well as lack-of-bonding areas that weekend the interface itself. The solution heat treatment, on the other hand, induced the precipitation of a thick and brittle intermetallic layer in the areas where a metallurgical bonding formed during casting. Moreover, the silicon particle spheroidization, improved the ductility of the matrix. The resulting microstructure allowed to obtain a slight improvement of elongation at failure of the compound casting compared to that of the aluminum alloy. Finally, basing on the obtained results, improvements are suggested that take into account both the preconditioning of the reinforcement surface and its geometry.

Keywords

Article history

  1. ReceivedUntil the next stage: 0 days
  2. AcceptedUntil the next stage: 4 days
  3. Published

How to cite

APA

Ferro, P., Fabrizi, A., Bonollo, F., & Berto, F. (2020). Microstructural and mechanical characterization of a stainless-steel wire mesh–reinforced Al-matrix composite: Bimatallic components for lightweight design. Fracture and Structural Integrity, 15(55), 289–301. https://doi.org/10.3221/IGF-ESIS.55.22

IEEE

P. Ferro, A. Fabrizi, F. Bonollo, and F. Berto, “Microstructural and mechanical characterization of a stainless-steel wire mesh–reinforced Al-matrix composite: Bimatallic components for lightweight design,” Fracture and Structural Integrity, vol. 15, no. 55, pp. 289–301, 2020, doi: 10.3221/IGF-ESIS.55.22.

MLA

Ferro, Paolo, et al. “Microstructural and mechanical characterization of a stainless-steel wire mesh–reinforced Al-matrix composite: Bimatallic components for lightweight design.” Fracture and Structural Integrity, vol. 15, no. 55, 2020, pp. 289–301. https://doi.org/10.3221/IGF-ESIS.55.22.

Chicago

Ferro, Paolo, Alberto Fabrizi, Franco Bonollo, and Filippo Berto. 2020. “Microstructural and mechanical characterization of a stainless-steel wire mesh–reinforced Al-matrix composite: Bimatallic components for lightweight design.” Fracture and Structural Integrity 15 (55): 289–301. https://doi.org/10.3221/IGF-ESIS.55.22.

Harvard

Ferro, P., Fabrizi, A., Bonollo, F. and Berto, F. (2020) ‘Microstructural and mechanical characterization of a stainless-steel wire mesh–reinforced Al-matrix composite: Bimatallic components for lightweight design’, Fracture and Structural Integrity, 15(55), pp. 289–301. doi: 10.3221/IGF-ESIS.55.22.

Vancouver

Ferro P, Fabrizi A, Bonollo F, Berto F. Microstructural and mechanical characterization of a stainless-steel wire mesh–reinforced Al-matrix composite: Bimatallic components for lightweight design. Fracture and Structural Integrity. 2020;15(55):289-301. doi:10.3221/IGF-ESIS.55.22

BibTeX

@article{ferro2020, author = {Ferro, Paolo and Fabrizi, Alberto and Bonollo, Franco and Berto, Filippo}, title = {Microstructural and mechanical characterization of a stainless-steel wire mesh–reinforced Al-matrix composite: Bimatallic components for lightweight design}, journal = {Fracture and Structural Integrity}, year = {2020}, volume = {15}, number = {55}, pages = {289--301}, doi = {10.3221/IGF-ESIS.55.22}, url = {https://doi.org/10.3221/IGF-ESIS.55.22}, issn = {1971-8993} }

RIS

TY - JOUR AU - Ferro, Paolo AU - Fabrizi, Alberto AU - Bonollo, Franco AU - Berto, Filippo TI - Microstructural and mechanical characterization of a stainless-steel wire mesh–reinforced Al-matrix composite: Bimatallic components for lightweight design JO - Fracture and Structural Integrity T2 - Fracture and Structural Integrity PY - 2020 DA - 2020/12/28 VL - 15 IS - 55 SP - 289 EP - 301 DO - 10.3221/IGF-ESIS.55.22 UR - https://doi.org/10.3221/IGF-ESIS.55.22 SN - 1971-8993 ER -

Licence

Creative Commons Attribution 4.0 International

May be shared and adapted, provided appropriate credit is given. Copyright © 2020 Paolo Ferro, Alberto Fabrizi, Franco Bonollo, Filippo Berto.

Copyright 
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.  

Open Access Statement

Fracture and Structural Integrity (F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.

F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit, providing a link to the license, and indicating if changes were made.

Similar articles

Most read articles by the same author(s)

<< < 1 2 3 4 > >>