Abstract
Focusing on ferritic-pearlitic DCIs, these alloys are characterized by a microstructure that ranges
from a fully ferritic to a completely pearlitic matrix, and they are widely used for many applications (e.g. wheels,
gears, crankshafts in cars, exhaust manifolds, valves, flywheels, boxes bearings, hubs, shafts, valves, flanges,
pipelines ...). Considering the graphite elements, their morphology can be considered as degenerated when its
nodularity is too low and this can be due to different causes (e.g., a partially failed nodularization process or a
wrong inoculant). In this work, a ferritic DCI with degenerated nodules was obtained by means of an annealing
treatment and the fatigue crack propagation resistance was investigated by means of fatigue crack propagation
tests performed according to ASTM E647, focusing on the influence of degenerated graphite nodules on the
fatigue crack paths. This analysis was performed both analysing the crack path profile by means of a scanning
electron microscope (SEM) and by means of a SEM fracture surfaces analysis.
Keywords
Article history
- ReceivedUntil the next stage: 0 days
- AcceptedUntil the next stage: 0 days
- Published
How to cite
APA
IEEE
MLA
Chicago
Harvard
Vancouver
BibTeX
RIS
Licence
Copyright © 2015 Fracture and Structural Integrity.
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Fracture and Structural Integrity (F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit, providing a link to the license, and indicating if changes were made.
Similar articles
Most read articles by the same author(s)
- Vittorio Di Cocco, Francesco Iacoviello, Stefano Natali, Andrea Brotzu, Fatigue crack micromechanisms in a Cu-Zn-Al shape memory alloy with pseudo-elastic behavior , Fracture and Structural Integrity: Vol 9 No 34 (2015): October 2015
- Vittorio Di Cocco, Francesco Iacoviello, Alessandra Rossi, Mauro Cavallini, Damaging micromechanisms characterization in a ferritic-pearlitic ductile cast iron , Fracture and Structural Integrity: Vol 8 No 30 (2014): October 2014
- Costanzo Bellini, Rosario Borrelli, Vittorio Di Cocco, Stefania Franchitti, Francesco Iacoviello, Larisa Patricia Mocanu, Luca Sorrentino, Titanium/FRP hybrid sandwich: in-plane flexural behaviour of short beam specimens , Fracture and Structural Integrity: Vol 18 No 69 (2024): July 2024
- Francesco Iacoviello, Workshop IGF "Fatica nelle giunzioni saldate (...e non)" , Fracture and Structural Integrity: Vol 3 No 8 (2009): April 2009
- Vittorio Di Cocco, Francesco Iacoviello, Alessandra Rossi, Mauro Cavallini, Stress triaxiality influence on damaging micromechanisms in a pearlitic ductile cast iron , Fracture and Structural Integrity: Vol 8 No 30 (2014): October 2014
- Carolina Schillaci, Daniela Pilone, Filippo Berto, Costanzo Bellini, Vittorio Di Cocco, Paolo Di Giamberardino, Daniela Iacoviello, Correlation Between Process Parameters and Mechanical Properties of Ti6Al4V Alloys Processed by Electron Beam Melting , Fracture and Structural Integrity: Vol 19 No 74 (2025): October 2025
- Francesco Iacoviello, Notiziario IGF , Fracture and Structural Integrity: Vol 3 No 9 (2009): July 2009
- Francesco Iacoviello, Notiziario IGF n.19 , Fracture and Structural Integrity: Vol 2 No 5 (2008): July 2008
- Francesco Iacoviello, Sommario , Fracture and Structural Integrity: Vol 3 No 10 (2009): October 2009